I have a PCMCIA DWL-G630 (D- Link) which, when I boot up the Laptop with the card inserted, works, and sometimes not! The card is using the rt61pci- driver (I think). Here is a part of dmesg when the card is not working:
Code:
[ 40.601225] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2061: AC'97 1 does not respond - RESET
[ 40.613381] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2070: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 40.613395] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ali5451/ali5451.c:1927: ali mixer 1 creating error.
[ 40.615305] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C7] -> GSI 11 (level, low) -> IRQ 11
[ 40.615322] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 40.615353] rt2x00pci -> rt2x00pci_alloc_reg: Error - Failed to allocate registers.
[ 40.615364] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 40.615376] rt61pci: probe of 0000:02:00.0 failed with error -12
[ 40.894265] lp0: using parport0 (interrupt-driven).
[ 40.927927] i2c-adapter i2c-0: Error: command never completed
[ 40.939202] i2c-adapter i2c-0: Error: command never completed
[ 40.951031] i2c-adapter i2c-0: Error: command never completed
[ 40.962557] i2c-adapter i2c-0: Error: command never completed
[ 40.974982] i2c-adapter i2c-0: Error: command never completed
[ 40.988751] i2c-adapter i2c-0: Error: command never completed
[ 41.048794] i2c-adapter i2c-0: Error: command never completed
[ 41.062148] i2c-adapter i2c-0: Error: command never completed
[ 41.116395] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
When I insert the card with the laptop already running the card does not work.
Does someone know what to do? As I said before, sometimes the card works!
Edit: It's a DLW- G630
rev. E2
