I have installed zebra ,but i can't run
/usr/sbin/zebra -dk
/usr/sbin/ospfd -d
/usr/sbin/bgpd -d

i even don't know how to check is it installed right or not!
who can help me !

intall it ?
test intall ?
config ?

thanks

the only zebra software i found online was
zebra-dump-parser which is perl
you would run by
perl zebra-dump-parser.pl

what i downloaded is " GNU Zebra "
http://www.zebra.org

Zebra is a replacement for routed, more robust offering ospf and bgp.

Anyway, it doesn't "run" as a process so to speak as in listed in a ps -ef | grep zebra.

Usage : zebra [OPTION...]

Daemon which manages kernel routing table management and redistribution between different routing protocols.

-b, --batch Runs in batch mode
-d, --daemon Runs in daemon mode
-f, --config_file Set configuration file name
-k, --keep_kernel Don't delete old routes which installed by zebra.
-l, --log_mode Set verbose log mode flag
-P, --vty_port Set vty's port number
-r, --retain When program terminates, retain added route by zebra.
-v, --version Print program version
-h, --help Display this help and exit


Your command "zebra -dk" is appropriate, check your routes with the "route" command. If you have 'em, life is good.

#route -C
Kernel IP routing cache
Source Destination Gateway Flags Metric Ref Use Iface
192.168.10.1 192.168.10.10 192.168.10.10 0 1 0 eth0
192.168.10.10 192.168.10.255 192.168.10.255 ibl 0 0 43 lo
192.168.10.1 192.168.10.10 192.168.10.10 0 0 1 eth0
192.168.10.1 ns1.nv.cox.net 192.168.10.2 0 0 1 eth0
192.168.10.1 triangle.kansas 192.168.10.2 0 0 0 eth0
192.168.10.1 ns1.nv.cox.net 192.168.10.2 0 0 1 eth0
triangle.kansas 192.168.10.1 192.168.10.1 l 0 0 0 lo
ns1.nv.cox.net 192.168.10.1 192.168.10.1 l 0 0 7 lo
192.168.10.10 192.168.10.1 192.168.10.1 il 0 0 301 lo

#route -e
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.50.0 * 255.255.255.0 U 40 0 0 eth2
192.168.10.0 * 255.255.255.0 U 40 0 0 eth0
default 192.168.10.2 0.0.0.0 UG 40 0 0 eth0

The result is :

http://free.hostdepartment.com/i/iqing/8.jpg


is't right or not?

to run the Zebra
#zebra -d
#service zebra start