xlogmaster error during make : please help !
 

Hello--

I'm trying to compile xlogmaster on redhat linux 9.

I'm quite stuck, any help would be appreciated.

I'm getting this :

[root@yoruban xlogmaster-1.6.0]# make
make all-recursive
make[1]: Entering directory `/home/baronsam/xlogmaster-1.6.0'
Making all in import
make[2]: Entering directory `/home/baronsam/xlogmaster-1.6.0/import'
Making all in vu
make[3]: Entering directory `/home/baronsam/xlogmaster-1.6.0/import/vu'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/baronsam/xlogmaster-1.6.0/import/vu'
Making all in rx
make[3]: Entering directory `/home/baronsam/xlogmaster-1.6.0/import/rx'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/baronsam/xlogmaster-1.6.0/import/rx'
make[3]: Entering directory `/home/baronsam/xlogmaster-1.6.0/import'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/baronsam/xlogmaster-1.6.0/import'
make[2]: Leaving directory `/home/baronsam/xlogmaster-1.6.0/import'
Making all in src
make[2]: Entering directory `/home/baronsam/xlogmaster-1.6.0/src'
c++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include -DXLM_HOME=\"/usr/local/etc/xlogmaster\" -DXLM_DB=\"/usr/local/etc/xlogmaster/database\" -DXLM_USER_DB=\".xlm-db\" -DXLM_LIB=\"/usr/local/etc/xlogmaster\" -I../import -c xlogmaster.cc
In file included from /usr/include/c++/3.2.2/backward/fstream.h:31,
from sysinc.H:23,
from xlogmaster.cc:36:
/usr/include/c++/3.2.2/backward/backward_warning.h:32:2: warning: #warning This file includes at least one deprecated or antiquated header. Please consider using one of the 32 headers found in section 17.4.1.2 of the C++ standard. Examples include substituting the <X> header for the <X.h> header for C++ includes, or <sstream> instead of the deprecated header <strstream.h>. To disable this warning use -Wno-deprecated.
In file included from xlogmaster.cc:38:
logclass.H:31: friend declaration requires class-key, i.e. `friend struct
Filter'
logclass.H:203: friend declaration requires class-key, i.e. `friend class Log'
xlogmaster.cc: In function `void create_buttons()':
xlogmaster.cc:295: `cerr' undeclared (first use this function)
xlogmaster.cc:295: (Each undeclared identifier is reported only once for each
function it appears in.)
xlogmaster.cc:295: `endl' undeclared (first use this function)
xlogmaster.cc: In function `void usage()':
xlogmaster.cc:718: `cout' undeclared (first use this function)
make[2]: *** [xlogmaster.o] Error 1
make[2]: Leaving directory `/home/baronsam/xlogmaster-1.6.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/baronsam/xlogmaster-1.6.0'
make: *** [all-recursive-am] Error 2


my makefile follows :

# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = /bin/sh

srcdir = .
top_srcdir = .
prefix = /usr/local
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/xlogmaster
pkglibdir = $(libdir)/xlogmaster
pkgincludedir = $(includedir)/xlogmaster

top_builddir = .

ACLOCAL = aclocal
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader

INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
CC = gcc
CXX = c++
DEFGTKRC = steelblue.gtkrc
GTKRCNAME = xlogmaster.gtkrc
GTK_CFLAGS = -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include
GTK_CONFIG = /usr/bin/gtk-config
GTK_LIBS = -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm
LN_S = ln -s
MAKEINFO = makeinfo
PACKAGE = xlogmaster
RANLIB = ranlib
VERSION = 1.6.0
XLM_DB = ${prefix}/etc/xlogmaster/database
XLM_HOME = ${prefix}/etc/xlogmaster
XLM_LIB = ${prefix}/etc/xlogmaster
XLM_USER_DB = .xlm-db
XLM_VERSION = 1.6.0

CLEANFILES = *~ .deps/*
SUBDIRS = import src audio output-plugins gtkrc-samples scripts database doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
Makefile.am Makefile.in NEWS TODO acconfig.h aclocal.m4 config.guess \
config.h.in config.sub configure configure.in install-sh missing \
mkinstalldirs


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4): configure.in
cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
@if test ! -f $@; then \
rm -f stamp-h; \
$(MAKE) stamp-h; \
else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
$(SHELL) ./config.status
@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
@if test ! -f $@; then \
rm -f $(srcdir)/stamp-h.in; \
$(MAKE) $(srcdir)/stamp-h.in; \
else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
cd $(top_srcdir) && $(AUTOHEADER)
@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
-rm -f config.h

maintainer-clean-hdr:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am:
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am: clean-hdr clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am: distclean-hdr distclean-tags distclean-generic clean-am

distclean: distclean-recursive
-rm -f config.status

maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:


thanks for your help,

--sam