I have a Linksys wpc54g v2 wireless card. Have downloaded and installed the ACX100 projects software but cannot get it to work yet. The driver finds the card but cannot load the firmware. I stuck tiacx111 in /lib/firmware buy driver does not find it(am running Fedora Core 5 2.6.15.rc5-git6 Kernel). Below is what I get in dmesg. Any ideas anyone as to what I am missing ?

One other question I have is that the linksys card comes with firmware called FwRad16.bin and FwRad17.bin. Do not know why it is asking for tiacx111.

acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, 0.sf.net in case of further questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as no n-working firmware upload. Report them
running on a little-endian CPU
PCI module v0.3.20 initialized, waiting for cards to probe...
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:07:00.0 to 64
acx: found ACX111-based wireless network card at 0000:07:00.0, irq:10, phymem1:0 x28020000, phymem2:0x28000000, mem1:0xd0910000, mem1_size:8192, mem2:0xd0940000, mem2_size:131072
initial debug setting is 0x000A
using IRQ 10
requesting firmware image 'tiacx111c16'
acx: firmware image 'tiacx111c16' was not provided. Check your hotplug scripts
requesting firmware image 'tiacx111'
acx: firmware image 'tiacx111' was not provided. Check your hotplug scripts
acx: reset_dev() FAILED
ACPI: PCI interrupt for device 0000:07:00.0 disabled
acx_pci: probe of 0000:07:00.0 failed with error -5
USB module v0.3.20 initialized, probing for devices...
usbcore: registered new driver acx_usb

Please do not post the same thread in more than one forum. Picking the most relevant forum and posting it once there makes it easier for other members to help you and keeps the discussion all in one place.

http://www.linuxquestions.org/rules.php

Continue this here.