WINE and CUPS-need help badly
 

I'm trying to print to a printer that's been set up successfully via CUPS on KDE through WINE. The reason is that I am being forced to use a proprietary piece of windows software at work which I got working through WINE.. except for printing. If you folks can help me figure out how to set up my win.ini file and/or my wine config and/or my /etc/printcap file I would be very very grateful. Here's a brief history:

1) installed wine and told it to use the real windows directory on my dual boot. Doing this caused an unhandled exception crash whenever I tried to print.

2) installed wine using a fake_windows install. Now I don't get the option to print (it's greyed out) and the page setup option doesn't do anything.

After talking with somebody on this winehq forum I believe the easier thing is to troubleshoot #2. To this effect I am posting the wine config, win.ini, and /etc/printcap file. In this file, the printer is sitting on a XP machine with coordinates //Newark/HPLaserJ (it's an HP LaserJet 6)

Again.. any pointers would be appreciated..

WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;

[Drive A]
"Type" = "floppy"
"Path" = "/floppy"
"Label" = "/floppy"
"Device" = "/dev/fd0"

[Drive C]
"Path" = "/home/foo/.wine/fake_windows"
"Type" = "hd"
"Label" = "/home/foo/.wine/fake_windows"
"Filesystem" = "win95"

[Drive D]
"Type" = "hd"
"Path" = "/mnt/windows"
"Label" = "/mnt/windows"
"FS" = "win95"

[Drive M]
"Type" = "cdrom"
"Path" = "/cdrom"
"Label" = "/cdrom"
"FS" = "win95"
"Device" = "/dev/hdc"

[Drive X]
"Type" = "hd"
"Path" = "/tmp"
"Label" = "Tmp Drive"
"FS" = "win95"

[Drive Y]
"Type" = "network"
"Path" = "${HOME}"
"Label" = "Home"
"FS" = "win95"

[Drive Z]
"Type" = "network"
"Path" = "/"
"Label" = "Root"
"FS" = "win95"

[wine]
"Windows" = "C:\\Windows"
"System" = "C:\\Windows\\System"
"Temp" = "X:\\"
"Path" = "C:\\Windows;C:\\Windows\\System;X:\\;Y:\\"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"

# <wineconf>

[DllOverrides]
; default for all other dlls
"*" = "builtin, native, so"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
"Desktop" = "N"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"

[windows]
device=HPLaserJ,WINEPS,LPR:HPLaserJ

[fonts]
;Read documentation/fonts before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"

;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"

[devices]
HPLaserJ=WINEPS,LPR:HPLaserJ

;[parallelports]
;"Lpt1" = "/dev/lp0"

[spooler]
"LPT1:" = "|lpr"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"
FILE:=
\\NEWARK\HPLaserJ=

[spy]
"Exclude" = "WM_SIZE;WM_TIMER;"

[PrinterPorts]
HP LaserJet 6L PCL=PCL5EMS3,\\NEWARK\HPLaserJ,15,45

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
"WineLook" = "Win95"

[Console]
;"Drivers" = "tty"
;"XtermProg" = "nxterm"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files

[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[WinMM]
"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

# </wineconf>

#########################################
# Application dependent sections follow #
#########################################

[AppDefaults\\_INS5576._MP\\x11drv]
; Lotus Notes R5 installer
; I'm quite not sure this will run on some other machine than mine, but it
; can't hurt
"Managed" = "N"
"Desktop" = "N"

[AppDefaults\\nlnotes.exe\\x11drv]
"Desktop" = "800x600"

[AppDefaults\\notes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

[AppDefaults\\nlnotes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

[AppDefaults\\nhldaemn.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

**** Here's the win.ini file:

[intl]
sLanguage=English (United States)
sCountry=United States
iCountry=1
s1159=AM
s2359=PM
sTime=:
iTime=0
iTLZero=0
sShortDate=M/d/yyyy
iDate=0
sLongDate=dddd, MMMM dd, yyyy
sDate=/
sCurrency=$
iCurrency=0
iNegCurr=0
iCurrDigits=2
sDecimal=.
sList=,
sThousand=,
iDigits=2
iLZero=1
iMeasure=1

***finally, if it helps, here is /etc/printcap

# /etc/printcap: printer capability database. See printcap(5).
# You can use the filter entries df, tf, cf, gf etc. for
# your own filters. See /etc/filter.ps, /etc/filter.pcl and
# the printcap(5) manual page for further details.

lp|Generic dot-matrix printer entry:\
:lp=/dev/lp0:\
:sd=/var/spool/lpd/lp:\
:af=/var/log/lp-acct:\
:lf=/var/log/lp-errs:\
:pl#66:\
:pw#80:\
:pc#150:\
:mx#0:\
:sh:

# rlp|Remote printer entry:\
# :lp=:\
# :rm=remotehost:\
# :rp=remoteprinter:\
# :sd=/var/spool/lpd/remote:\
# :mx#0:\
# :sh: