I am having some problems to make Linux Mandrake 10.0 recognize my bttv 878 PixelView capture card (Rev 4C). The command "dmesg" shows me that it is installed. But "drakconf" cannot dealt with it.
parport0: Printer, HEWLETT-PACKARD DESKJET 640C
lp0: using parport0 (polling).
lp0: console ready
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 0000:00:0b.0
PCI: Sharing IRQ 10 with 0000:00:0b.1
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xd7000000
bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=41
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
0,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found @ 0xc2
tuner: type set to 41 (Philips PAL_MK (FI1216 MK))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
And all drivers need are loaded as it is shown bellow:
tuner 17292 0
tvaudio 21612 0
bttv 146956 0
video-buf 20388 1 bttv
i2c-algo-bit 9512 1 bttv
v4l2-common 6144 1 bttv
btcx-risc 4712 1 bttv
lp 12200 0
i2c-core 23044 4 tuner,tvaudio,bttv,i2c-algo-bit
videodev 9536 1 bttv
parport_pc 32832 1
parport 38952 2 lp,parport_pc
md5 3872 1
ipv6 232416 18
But "drakconf" can't watch tv in my computer and neither my cam can show any image...
My .xsession-errors show me two errors that it could be the problem, but I can't how to fix it up:
kio (KIOConnection): ERROR: Header has invalid size (-1)
kio (KLauncher): ERROR: SlavePool: No communication with slave.
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
X Error: BadAccess (attempt to access private resource denied) 10
Major opcode: 2
Minor opcode: 0
Resource id: 0x3000005
Xlib: extension "GLX" missing on display ":0.0".
May someone help me?