Problem description:
Trying to use Twinkle for pc-to-pc calls. I type in an sip number then hear the ring sound.
Twinkle then prints: `Line 1: far end answered call.' but there is no audio output (I've tried several SIP numbers).

Details on my system:
Linux: Debian Lenny Linux version 2.6.26-1-686 (Debian 2.6.26-8)

My sip account is with ekiga.net

hardware:
lspci|grep Audio: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

aplay -L
default:CARD=Intel
HDA Intel, ALC262 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)

cat /etc/esound/esd.conf:
[esd]
auto_spawn=1
spawn_options=-terminate -nobeeps -as 5
spawn_wait_ms=100
# default options are used in spawned and non-spawned mode
default_options=

lsmod|grep snd:
snd_hda_intel 324248 1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 1 snd_pcm
snd 45604 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm


What I've done:
-installed twinkle 1.4.2 form the Ubuntu rep.: http://ubuntuforums.org/archive/inde...t-1211615.html
-disabled flash plugin in epiphany: http://blog.foppiano.org/2009/07/12/...uration-howto/
-checked (with alsamixer) that both front mic and mic are enabled: http://blog.foppiano.org/2009/07/12/...uration-howto/
-set in /etc/esound/esd.conf: auto_spawn=1
-set in Twinkle :
Ring tone: ALSA: plughw: 0,0 HDA Intel (ALC262 Analog)
Speaker: ALSA: plughw: 0,0 HDA Intel (ALC262 Analog)
Microphone: ALSA: plughw: 0,0 HDA Intel (ALC262 Analog)
-system->preferneces->soound->sounds->ticked `Enable software sound mixing (ESD)'

Alas, it still produce any audio output besides the intial ring. Any suggestions?

Cheers,
Mike.