SuSe/asus mb/lm_sensors too low cpu-temp
Hello!
My cpu temps are too low after upgrading from Redhat 9 to SuSe 8.2. Seems like it now reads the socket diode instead of the cpu diode.
Redhat comes with lm_sensors 2.6.5 and SuSe with 2.7.0, so it should work.
My mobo is a a7n266-vm with xp2000+.
Modules.conf:
alias char-major-89 i2c-dev
boot.local:
modprobe i2c-amd756
modprobe w83781d
sensors:
as99127f-i2c-0-2d
Adapter: SMBus nVidia nForce adapter at 5500
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.80 V (min = +1.93 V, max = +2.14 V) ALARM
VCore 2: +1.79 V (min = +1.93 V, max = +2.14 V) ALARM
+3.3V: +3.34 V (min = +3.13 V, max = +3.45 V)
+5V: +4.94 V (min = +4.72 V, max = +5.24 V)
+12V: +11.67 V (min = +10.79 V, max = +13.19 V)
-12V: -16.21 V (min = -13.19 V, max = -10.73 V) ALARM
-5V: -6.14 V (min = -5.24 V, max = -4.74 V) ALARM
fan1: 2934 RPM (min = 3000 RPM, div = 2) ALARM
fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
temp1: +35°C (limit = +60°C)
temp2: +39.0°C (limit = +120°C, hysteresis = +100°C)
temp3: +224.4°C (limit = +120°C, hysteresis = +100°C)
vid: +2.050 V
alarms:
beep_enable:
Sound alarm enabled
39 has to be the socket diode. Anyone have any tips as to what i might try?
Last edited by Goofee; 08-22-2003 at 01:39 PM.
|