# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
	workgroup = mydomain

# server string is the equivalent of the NT Description field
	server string = serv02

# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
	security = user

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
	hosts allow = 192.168.1. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# This option tells cups that the data has already been rasterized
;cups options = raw

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).
	max log size = 50

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;   realm = MY_REALM

# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
	passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /usr/local/samba/lib/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.1.7/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
	local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
	os level = 35

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
	domain master = no

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
	preferred master = no

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
#   logon path = \\%L\profiles\%U
#   logon home = \\%L\%U
#   logon drive = Z:

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
	wins server = 192.168.1.6

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
	wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
	dns proxy = no

# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
	add user script = /usr/sbin/useradd %u
	add group script = /usr/sbin/groupadd %g
	add machine script = /usr/sbin/adduser -d /dev/null -s /bin/false -M %u
	delete user script = /usr/sbin/userdel %u
	delete user from group script = /usr/sbin/deluser %u %g
	delete group script = /usr/sbin/groupdel %g

	smb ports = 445
	preserve case = yes
	short preserve case = yes
	case sensitive = no
	keepalive = 0
	socket options = TCP_NODELAY IPTOS_LOWDELAY
	username map = /etc/samba/smbusers
	smb passwd file = /etc/samba/smbpasswd

#============================ Share Definitions ==============================
[homes]
	comment = Home Directories
	valid users = %S
	writeable = yes
#   browseable = no
#   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
# [netlogon]
#   comment = Network Logon Service
#   path = /etc/samba/netlogon
#   guest ok = no
#   browseable = no
#   writable = yes
#   share modes = yes
#   read only = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
#[Profiles]
#   comment = Roaming Profile Share
#   path = /etc/samba/profiles
#   browseable = no
#   guest ok = yes
#   writable = yes
#   level2 oplocks = yes
#   dos filetimes = yes
#   profile acls = yes
#   read only = no

[audio]
	path = /audio
	writeable = yes
	guest ok = yes
	create mask = 0777
	directory mask = 0777

[2007/12/17 10:34:11, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 10:48:56, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 10:49:06, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 10:49:40, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 11:53:35, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 12:53:23, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected
[2007/12/17 12:53:23, 0] lib/util_sock.c:get_peer_addr(1232)
  getpeername failed. Error was Transport endpoint is not connected