LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 08-29-2014, 11:50 PM   #1
IIRezaII
LQ Newbie
 
Registered: Jan 2013
Posts: 9

Rep: Reputation: Disabled
proftpd works only in debug mode !


Hi ,
I have a strange problem , i use
Code:
mod_auth_unix
in proftpd , when i try to connect server i got this error
Code:
530 Login incorrect
, but my username and password is correct

when i switch proftpd to debug mode
Code:
service proftpd stop
proftpd -n -d 20
it's will work fine , but i can't see any error or something like this in debug mode , i am sure my proftpd.conf is ok

here is proftpd.conf
Code:
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $

ServerName			"ProFTPD server"
ServerIdent			on "FTP Server ready."
ServerAdmin			root@localhost
ServerType			standalone
#ServerType			inetd
DefaultServer			on
AccessGrantMsg			"User %u logged in."
#DisplayConnect			/etc/ftpissue
#DisplayLogin			/etc/ftpmotd
#DisplayGoAway			/etc/ftpgoaway
DeferWelcome			off
PathDenyFilter "\\.(php|php4|php5)$"

# Use this to excude users from the chroot
DefaultRoot			~ !adm

# Use pam to authenticate (default) and be authoritative
AuthPAMConfig			proftpd
AuthOrder			mod_auth_unix.c

# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups			off
UseReverseDNS			off

# Port 21 is the standard FTP port.
Port				2109

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask				022

# Default to show dot files in directory listings
ListOptions			"-a"

# See Configuration.html for these (here are the default values)
#MultilineRFC2228		off
#RootLogin			off
#LoginPasswordPrompt		on
#MaxLoginAttempts		3
#MaxClientsPerHost		none
#AllowForeignAddress		off	# For FXP

# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart		on
AllowStoreRestart		on

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances			20

# Set the user and group that the server normally runs at.
User				nobody
Group				nobody

# Disable sendfile by default since it breaks displaying the download speeds in
# ftptop and ftpwho
UseSendfile			no

# This is where we want to put the pid file
ScoreboardFile			/var/run/proftpd.score

# Normally, we want users to do a few things.
<Global>
  AllowOverwrite		yes
  <Limit ALL SITE_CHMOD>
    AllowAll
  </Limit>
   <Limit DELE>
     DenyAll
   </Limit>
   <Limit RMD>
     DenyAll
   </Limit>
RootLogin on
UseFtpUsers off
</Global>

# Define the log formats
LogFormat			default	"%h %l %u %t \"%r\" %s %b"
LogFormat			auth	"%v [%P] %h %t \"%r\" %s"

# TLS
# Explained at http://www.castaglia.org/proftpd/modules/mod_tls.html
#TLSEngine			on
#TLSRequired			on
#TLSRSACertificateFile		/etc/pki/tls/certs/proftpd.pem
#TLSRSACertificateKeyFile	/etc/pki/tls/certs/proftpd.pem
#TLSCipherSuite			ALL:!ADH:!DES
#TLSOptions			NoCertRequest
#TLSVerifyClient		off
##TLSRenegotiate		ctrl 3600 data 512000 required off timeout 300
#TLSLog				/var/log/proftpd/tls.log

# SQL authentication Dynamic Shared Object (DSO) loading
# See README.DSO and howto/DSO.html for more details.
#<IfModule mod_dso.c>
#   LoadModule mod_sql.c
#   LoadModule mod_sql_mysql.c
#   LoadModule mod_sql_postgres.c
#</IfModule>

# A basic anonymous configuration, with an upload directory.
#<Anonymous ~ftp>
#  User				ftp
#  Group				ftp
#  AccessGrantMsg		"Anonymous login ok, restrictions apply."
#
#  # We want clients to be able to login with "anonymous" as well as "ftp"
#  UserAlias			anonymous ftp
#
#  # Limit the maximum number of anonymous logins
#  MaxClients			10 "Sorry, max %m users -- try again later"
#
#  # Put the user into /pub right after login
#  #DefaultChdir			/pub
#
#  # We want 'welcome.msg' displayed at login, '.message' displayed in
#  # each newly chdired directory and tell users to read README* files. 
#  DisplayLogin			/welcome.msg
#  DisplayFirstChdir		.message
#  DisplayReadme			README*
#
#  # Some more cosmetic and not vital stuff
#  DirFakeUser			on ftp
#  DirFakeGroup			on ftp
#
#  # Limit WRITE everywhere in the anonymous chroot
#  <Limit WRITE SITE_CHMOD>
#    DenyAll
#  </Limit>
#
#  # An upload directory that allows storing files but not retrieving
#  # or creating directories.
#  <Directory uploads/*>
#    AllowOverwrite		no
#    <Limit READ>
#      DenyAll
#    </Limit>
#
#    <Limit STOR>
#      AllowAll
#    </Limit>
#  </Directory>
#
#  # Don't write anonymous accesses to the system wtmp file (good idea!)
#  WtmpLog			off
#
#  # Logging for the anonymous transfers
#  ExtendedLog		/var/log/proftpd/access.log WRITE,READ default
#  ExtendedLog		/var/log/proftpd/auth.log AUTH auth
#
#</Anonymous>



Debug log
Code:
[root@server ~]# proftpd -n -d 20
[HOSTNAME] proftpd[3088]: using TCP receive buffer size of 87380 bytes
[HOSTNAME] proftpd[3088]: using TCP send buffer size of 16384 bytes
[HOSTNAME] proftpd[3088]: testing Unix domain socket using S_ISFIFO
[HOSTNAME] proftpd[3088]: testing Unix domain socket using S_ISSOCK
[HOSTNAME] proftpd[3088]: using S_ISSOCK macro for Unix domain socket detection
[HOSTNAME] proftpd[3088]: mod_tls/2.4.3: using OpenSSL 1.0.0-fips 29 Mar 2010
[HOSTNAME] proftpd[3088]: PathDenyFilter: compiling deny regex '\.(php|php4|php5)$'
[HOSTNAME] proftpd[3088]: retrieved UID 99 for user 'nobody'
[HOSTNAME] proftpd[3088]: retrieved GID 99 for group 'nobody'
[HOSTNAME] proftpd[3088]: UseReverseDNS off, returning IP address instead of DNS name
[HOSTNAME] proftpd[3088] [SERVERIP]:
[HOSTNAME] proftpd[3088] [SERVERIP]: Config for ProFTPD server:
[HOSTNAME] proftpd[3088] [SERVERIP]: ServerIdent
[HOSTNAME] proftpd[3088] [SERVERIP]: DefaultServer
[HOSTNAME] proftpd[3088] [SERVERIP]: AccessGrantMsg
[HOSTNAME] proftpd[3088] [SERVERIP]: DeferWelcome
[HOSTNAME] proftpd[3088] [SERVERIP]: PathDenyFilter
[HOSTNAME] proftpd[3088] [SERVERIP]: DefaultRoot
[HOSTNAME] proftpd[3088] [SERVERIP]: AuthPAMConfig
[HOSTNAME] proftpd[3088] [SERVERIP]: AuthOrder
[HOSTNAME] proftpd[3088] [SERVERIP]: IdentLookups
[HOSTNAME] proftpd[3088] [SERVERIP]: Umask
[HOSTNAME] proftpd[3088] [SERVERIP]: ListOptions
[HOSTNAME] proftpd[3088] [SERVERIP]: AllowRetrieveRestart
[HOSTNAME] proftpd[3088] [SERVERIP]: AllowStoreRestart
[HOSTNAME] proftpd[3088] [SERVERIP]: UserID
[HOSTNAME] proftpd[3088] [SERVERIP]: UserName
[HOSTNAME] proftpd[3088] [SERVERIP]: GroupID
[HOSTNAME] proftpd[3088] [SERVERIP]: GroupName
[HOSTNAME] proftpd[3088] [SERVERIP]: UseSendfile
[HOSTNAME] proftpd[3088] [SERVERIP]: Limit
[HOSTNAME] proftpd[3088] [SERVERIP]:  DenyAll
[HOSTNAME] proftpd[3088] [SERVERIP]: Limit
[HOSTNAME] proftpd[3088] [SERVERIP]:  DenyAll
[HOSTNAME] proftpd[3088] [SERVERIP]: Limit
[HOSTNAME] proftpd[3088] [SERVERIP]:  AllowAll
[HOSTNAME] proftpd[3088] [SERVERIP]: AllowOverwrite
[HOSTNAME] proftpd[3088] [SERVERIP]: RootLogin
[HOSTNAME] proftpd[3088] [SERVERIP]: UseFtpUsers
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at mod_delay.c:425
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at mod_delay.c:430
[HOSTNAME] proftpd[3088] [SERVERIP]: retrieved group ID: 99
[HOSTNAME] proftpd[3088] [SERVERIP]: setting group ID: 99
[HOSTNAME] proftpd[3088] [SERVERIP]: SETUP PRIVS at main.c:3325
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at main.c:2295
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at main.c:2304
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at main.c:2662
[HOSTNAME] proftpd[3088] [SERVERIP]: opening scoreboard '/var/run/proftpd.score'
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at main.c:2688
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at mod_ctrls.c:1209
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at mod_ctrls.c:1211
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at inet.c:347
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at inet.c:410
[HOSTNAME] proftpd[3088] [SERVERIP]: ProFTPD 1.3.4a (maint) (built Fri Jan 20 2012 17:30:05 EST) standalone mode STARTUP
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at pidfile.c:47
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at pidfile.c:49
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at mod_ctrls.c:707
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at mod_ctrls.c:711
[HOSTNAME] proftpd[3089] [SERVERIP]: ROOT PRIVS at main.c:1261
[HOSTNAME] proftpd[3089] [SERVERIP]: RELINQUISH PRIVS at main.c:1265
[HOSTNAME] proftpd[3089] [SERVERIP]: no matching vhost found for ::ffff:[SERVERIP]#21, using 'ProFTPD server' listening on wildcard address
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at main.c:1076
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): SETUP PRIVS at main.c:1081
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): session requested from client in unknown class
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): performing module session initializations
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): mod_cap/1.1: adding CAP_AUDIT_WRITE capability
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): mod_ident/1.0: ident lookup disabled
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at mod_delay.c:1650
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_delay.c:1655
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at mod_auth.c:129
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): opening scoreboard '/var/run/proftpd.score'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth.c:131
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AuthOrder in effect, resetting auth module order
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): connected - local  : ::ffff:[SERVERIP]:21
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): connected - remote : 85.25.117.90:63682
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): FTP session opened.
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'USER reza' to mod_tls
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'USER reza' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'USER reza' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'USER reza' to mod_delay
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'USER reza' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching CMD command 'USER reza' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'USER reza' to mod_delay
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching LOG_CMD command 'USER reza' to mod_log
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PASS (hidden)' to mod_tls
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PASS (hidden)' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PASS (hidden)' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PASS (hidden)' to mod_delay
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PASS (hidden)' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching CMD command 'PASS (hidden)' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): retrieved UID 501 for user 'reza'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): retrieved group ID: 50
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): retrieved group name: ftp
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at mod_auth_unix.c:467
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth_unix.c:548
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): user 'reza' authenticated by mod_auth_unix.c
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): USER PRIVS 501 at mod_auth.c:1133
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth.c:1135
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP):
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Config for ProFTPD server:
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ServerIdent
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): DefaultServer
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AccessGrantMsg
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): DeferWelcome
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): PathDenyFilter
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): DefaultRoot
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AuthPAMConfig
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AuthOrder
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): IdentLookups
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Umask
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ListOptions
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AllowRetrieveRestart
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AllowStoreRestart
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): UserID
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): UserName
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): GroupID
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): GroupName
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): UseSendfile
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Limit
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP):  DenyAll
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Limit
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP):  DenyAll
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Limit
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP):  AllowAll
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): AllowOverwrite
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RootLogin
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): UseFtpUsers
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at mod_auth.c:1223
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): opening TransferLog '/var/log/xferlog'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): setting group ID: 50
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth.c:1263
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): USER PRIVS 501 at mod_auth.c:665
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): retrieved UID 501 for user 'reza'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth.c:669
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): set TZ environment variable to 'IRST'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Preparing to chroot to directory '/home/reza'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at auth.c:1383
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at auth.c:1385
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): Environment successfully chroot()ed
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): ROOT PRIVS at mod_auth.c:1304
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): SETUP PRIVS at mod_auth.c:1316
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): in dir_check_full(): path = '/', fullpath = '/home/reza/'.
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_cap
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): mod_cap/1.1: capabilities '= cap_net_bind_service,cap_audit_write+ep'
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_tls
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_delay
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_log
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_ls
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): RELINQUISH PRIVS at mod_auth.c:1678
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_xfer
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching POST_CMD command 'PASS (hidden)' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching LOG_CMD command 'PASS (hidden)' to mod_log
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching LOG_CMD command 'PASS (hidden)' to mod_readme
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching LOG_CMD command 'PASS (hidden)' to mod_auth
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): USER reza: Login successful.
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PWD' to mod_tls
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PWD' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching PRE_CMD command 'PWD' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching CMD command 'PWD' to mod_core
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): in dir_check_full(): path = '/', fullpath = '/home/reza/'.
[HOSTNAME] proftpd[3089] [SERVERIP] (CLIENTIP): dispatching LOG_CMD command 'PWD' to mod_log
[HOSTNAME] proftpd[3088] [SERVERIP]: scrubbing scoreboard
[HOSTNAME] proftpd[3088] [SERVERIP]: ROOT PRIVS at scoreboard.c:1369
[HOSTNAME] proftpd[3088] [SERVERIP]: RELINQUISH PRIVS at scoreboard.c:1372
i use
centos 6.5 64bit
ProFTPD Version 1.3.4a

i run proftpd with this version in at least 10 other server and i haven't problem , i searched alot , but i can't figure what is problem
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] sshd debug mode mddnix Linux - Newbie 6 10-03-2013 03:59 PM
How to find a library is compiled in debug mode or release mode babu198649 Linux - Newbie 1 05-26-2009 09:42 AM
xinetd in debug mode. kutty_prasad Linux - Enterprise 2 01-30-2008 03:32 AM
proftpd only works in standalone mode, not inetd mode (slack 10.2) yimboli Linux - Newbie 9 01-24-2006 12:49 PM
DHCP in debug mode lapthorn Linux - Networking 1 12-03-2003 07:22 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 12:19 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration