LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 11-23-2004, 04:25 PM   #1
Belegdol
Member
 
Registered: Oct 2003
Location: Poland
Distribution: Fedora 7
Posts: 59

Rep: Reputation: 15
Problem with k3b in Mandrake 10.1


Nevertheless I liked it - up to today, when id destroyed 2 cds. It has been reporting that it's unable to decode audio tracks, which were ordinary mp3 (something wrong with names maybe). But today, something got terribly wrong:
Code:
System
-----------------------
K3b Version:0.11.16 
KDE Version: 3.2.3
QT Version: 3.3.3

cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4120B'
Revision       : '2.01'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010 
Profile: 0x0008 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0002 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   686 MB        
Total size:      785 MB (77:48.01) = 350101 sectors
Lout start:      785 MB (77:50/01) = 350101 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -11693 (97:26/07)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 5
Manufacturer: FORNET INTERNATIONAL PTE LTD.
Blocks total: 359846 Blocks current: 358496 Blocks remaining: 8395
Speed set to 1411 KB/s
Starting to write CD/DVD at speed   8.0 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 1350
Track 01:    0 of  686 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 05 64 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 A4 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0xA4
Sense flags: Blk 0 (not valid) 
resid: 63736
cmd finished after 1.030s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: Try to use 'driveropts=burnfree'.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 63488 bytes
Trouble flushing the cache
Writing  time:    6.363s
Average write speed 736.7x.
Fixating...
/usr/bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 A4 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0xA4
Sense flags: Blk 0 (not valid) 
cmd finished after 0.012s timeout 120s
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.625s
/usr/bin/cdrecord: fifo had 65 puts and 2 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=8 -tao -dummy -eject -multi -xa1 -tsize=351466s - 

mkisofs
-----------------------
351466
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem that does not conform to ISO-9660.
  0.15% done, estimate finish Wed Nov 24 01:13:35 2004
  0.29% done, estimate finish Tue Nov 23 23:48:53 2004
  0.43% done, estimate finish Tue Nov 23 23:20:05 2004
  0.57% done, estimate finish Tue Nov 23 23:05:14 2004

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid JULIAN_15 -volset  -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-jsikorski/k3bZy2wkc.tmp -rational-rock -hide-list /tmp/kde-jsikorski/k3b33Wxma.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-jsikorski/k3bHT30Ub.tmp -untranslated-filenames -iso-level 1 -path-list /tmp/kde-jsikorski/k3bi7J5ia.tmp /home/jsikorski/.kde/share/apps/k3b/temp/dummydir0/
Any Ideas/better recording software for linux?
Disabling multisession caused error about busy device.

Last edited by Belegdol; 11-23-2004 at 05:15 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
problem with k3b in kde, mandrake kintaroe Linux - Software 0 09-19-2004 08:37 AM
K3B in Mandrake 9.2 Bloodspiller Mandriva 2 02-11-2004 08:54 AM
Problem with k3b identifing burner device under Mandrake 9.2 stv_t Linux - Software 0 11-25-2003 06:02 AM
K3b configuration problem in Mandrake 9.2 gowanstl27 Mandriva 3 11-18-2003 01:16 AM
K3b Mandrake 9.1 Maurice Arthur Mandriva 7 09-12-2003 06:02 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 09:22 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration