Im trying 2 install suse 9.0 Pro on my "new" comp

i installed it earlier on a P2 400 mhz comp and everything worked just fine.
i bought a new mainboard, processor and memory

Mainboard:

Asus A7V8X-X

Processor:

AMD 2200XP mhz

Memory :

512 mb DDR

And my problem is this :

I tried 2 install Suse 9.0 Pro ( from the same cd's that i used on the P2 400 mhz ) and i get a lot of errors like :

Pam-modules-9.0-5.i586 failed
skipped
xlockmore-5.09-38.i586 failed
skipped
kdenetwork3-lisa-3.1.4-27.i586 failed
skipped
scpm-0.9.4-42.i586 failed
skipped
alsa-0.9.6-66.i586 failed
skipped
bootsplash-theme-SuSE-3.0-109.i586 failed
skipped
grub-0.93-102.i586 failed
skipped
lvm-1.0.7-105.i586 failed
skipped
kbd-1.08-35.i586 failed
skipped
pcsc-lite-1.1.1-113.i586 failed
skipped
SuSEfirewall2-3.1-189.noarch failed
skipped
hwinfo-7.30-6.i586 failed
skipped
yast2-theme-SuSElinux-2.8.3-noarch failed
skipped
gpm-1.20.1-200.i586 failed
skipped
raidtools-1.00.3-114.i586 failed
skipped
isapnp-1.26-390.i586 failed
skipped
acpid-1.0.1-155.i586 failed
skipped
sysvinit-2.82-362.i586 failed
skipped
desktop-data-SuSE-8.2.99-46.noarch failed
skipped
scsi-1.7_2.31_1.05_0.10-41.i586 failed
skipped
setserial-2.17-475.i586 failed
skipped
util-linux-2.11z-91.i586 failed
skipped
aaa_base-9.0-6.i586 failed
skipped
java2-jre-1.4.2-35.i586 failed
skipped
xinetd-2.3.12-27.i586 failed
skipped
bootsplash-3.0.7-30.i586 failed
skipped
syslogd-1.4.1-418.i586 failed

and it goes on and on with that kind of instalation errors

Does someone got any idea what i did wrong ???

( the whole system is the same as it was with the P2 400mhz comp, only the mainboard, processor an memory are changed )



Tobas

p.s. i tried also 2 intsal mandrake 9.2 and a suse network server but they al have errors

can it be my bios-settings?

"and it goes on and on with that kind of instalation errors

Does someone got any idea what i did wrong ???"

This looks like a problem with the IDE controller chip and/or the hard drive. Check the BIOS to make sure that the hard drive geometry is correct. If you are booting a CD-ROM on the same IDE controller chip then the problem is probably the hard drive or the BIOS/IDE controller/hard drive setup.

If you can boot a CD-ROM then try booting knoppix and see if you can do anything with the hard drive.

___________________________________
Be prepared. Create a LifeBoat CD.
http://users.rcn.com/srstites/LifeBo...home.page.html

Steve Stites

But there are some programs being installed.
only these errors came up, not all the packages are skipped.

it starts when the install is about 25% the the errors starts

Tobas

"But there are some programs being installed.
only these errors came up, not all the packages are skipped.

it starts when the install is about 25% the the errors starts"

Maybe the partition that you are installing to is too small.

___________________________________
Be prepared. Create a LifeBoat CD.
http://users.rcn.com/srstites/LifeBo...home.page.html

Steve Stites

Were the CDs (SuSE 9.0 and Mandrake 9.2) created from downloaded ISO images ?
If so, maybe there were errors during the burning process.

Also, you should try resetting the BIOS settings to the standard Default.


P.S. I checked the SuSE hardware database and you motherboard is fully supported.
http://cdb.suse.de/