Hi all
I have a question regarding OpenVPN
I have configured my ovpn server
it is in a private network 192.168.0.0
the ip addresses im using for the vpn connection are in the 10.9.1.0 network
but i want to connect my ovpn clinets to the 192.168.0.0 network
i read the manuals and I think the "push route" command will work for me,
but i cand understand fully the description of the command "push route"

# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

So the questions:
1These private subnets behind the server are routed from my vpn server or from another router
2How these private subnets "know to route" the open vpn address pool, is this a configuration of the router for this networks (192.168.0.0)or ?

1 when you push a route, that tells the vpn clients that machines within that ip block can be reached by going over the vpn

2 anything in 192.168.x.x won't know about your vpn clients so either their gateway router will need to know to send those ips to the vpn server or the vpn server will need to masquerade/NAT the packets coming from the vpn clients