LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)
-   -   ntpd problem with CentOs 5.8 (https://www.linuxquestions.org/questions/linux-software-2/ntpd-problem-with-centos-5-8-a-4175444821/)

luffywallis 01-09-2013 08:50 AM

ntpd problem with CentOs 5.8
 
Hi
i'm stuck with a problem with ntp. i want to synchronize the time of my centos VM (hyper-V) with a windows Domain Controller.

i tried this config on my ntp.conf:
Code:

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
#server 0.centos.pool.ntp.org
#server 1.centos.pool.ntp.org
#server 2.centos.pool.ntp.org
#server 192.168.10.251 burst iburst minpoll 4 maxpoll 4
server 192.168.10.251
server 192.168.10.242 burst iburst
#broadcast 192.168.1.255 key 42        # broadcast server
#broadcastclient                        # broadcast client
#broadcast 224.0.1.1 key 42            # multicast server
#multicastclient 224.0.1.1              # multicast client
#manycastserver 239.255.254.254        # manycast server
#manycastclient 239.255.254.254 key 42  # manycast client

# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
#server 127.127.1.0    # local clock
#fudge  127.127.1.0 stratum 10
#fudge 192.168.10.251
# Drift file.  Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
driftfile /var/lib/ntp/drift

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

#log configuration
logfile /var/log/ntpd.log


when i do a ntpq -p
Code:

[root@nagios log]# ntpq -p
    remote          refid      st t when poll reach  delay  offset  jitter
==============================================================================
 srvdc.domain.com  .LOCL.          1 u  17  64  377    0.818  -66746. 11626.4
 srvsecdc.domain. 192.168.10.251    2 u    2  64  377    0.658  -85287. 302.901

weird thing i don't have an asterisk (*)
when i add localhost as a server on ntp.conf, the asterisk appears on localhost

on my ntpd.log i have
Code:

[root@nagios log]# cat /var/log/ntpd.log
 9 Jan 13:20:52 ntpd[3575]: synchronized to LOCAL(0), stratum 10
 9 Jan 13:20:52 ntpd[3575]: kernel time sync enabled 0001
 9 Jan 13:28:28 ntpd[3575]: ntpd exiting on signal 15
 9 Jan 13:38:48 ntpd[4355]: ntpd exiting on signal 15
 9 Jan 15:08:23 ntpd[5129]: ntpd exiting on signal 15
 9 Jan 15:16:31 ntpd[12463]: ntpd exiting on signal 15
 9 Jan 15:18:01 ntpd[13175]: ntpd exiting on signal 15


when i do a grep ntpd /var/log/messages*
Code:

Jan  8 14:58:45 nagios ntpd[2944]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  8 14:58:47 nagios ntpd[2945]: precision = 1.000 usec
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface wildcard, ::#123 Disabled
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface lo, ::1#123 Enabled
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  8 14:58:47 nagios ntpd[2945]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  8 14:58:47 nagios ntpd[2945]: kernel time sync status 0040
Jan  8 15:02:27 nagios ntpd[2945]: synchronized to LOCAL(0), stratum 10
Jan  8 15:05:16 nagios ntpd[2945]: ntpd exiting on signal 15
Jan  8 15:03:02 nagios ntpd[4026]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  8 15:03:02 nagios ntpd[4027]: precision = 1.000 usec
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface wildcard, ::#123 Disabled
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface lo, ::1#123 Enabled
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  8 15:03:02 nagios ntpd[4027]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  8 15:03:02 nagios ntpd[4027]: kernel time sync status 0040
Jan  8 15:03:16 nagios ntpd[4027]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  8 15:06:33 nagios ntpd[4027]: synchronized to LOCAL(0), stratum 10
Jan  8 15:06:33 nagios ntpd[4027]: kernel time sync enabled 0001
Jan  8 15:51:26 nagios ntpd[4027]: ntpd exiting on signal 15
Jan  8 15:56:01 nagios ntpd[1934]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  8 15:56:01 nagios ntpd[1935]: precision = 1.000 usec
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface wildcard, ::#123 Disabled
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface lo, ::1#123 Enabled
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  8 15:56:01 nagios ntpd[1935]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  8 15:56:01 nagios ntpd[1935]: kernel time sync status 0040
Jan  8 15:56:05 nagios ntpd[1935]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  8 15:59:29 nagios ntpd[1935]: synchronized to LOCAL(0), stratum 10
Jan  8 15:59:29 nagios ntpd[1935]: kernel time sync enabled 0001
Jan  9 10:44:16 nagios ntpd[1935]: ntpd exiting on signal 15
Jan  9 10:01:26 nagios ntpd[22640]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 10:01:26 nagios ntpd[22641]: precision = 1.000 usec
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface wildcard, ::#123 Disabled
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface lo, ::1#123 Enabled
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 10:01:26 nagios ntpd[22641]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 10:01:26 nagios ntpd[22641]: kernel time sync status 0040
Jan  9 10:01:37 nagios ntpd[22641]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 10:04:51 nagios ntpd[22641]: synchronized to LOCAL(0), stratum 10
Jan  9 10:04:51 nagios ntpd[22641]: kernel time sync enabled 0001
Jan  9 11:47:36 nagios ntpd[22641]: ntpd exiting on signal 15
Jan  9 11:47:36 nagios ntpd[29527]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 11:47:36 nagios ntpd[29528]: precision = 1.000 usec
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface wildcard, ::#123 Disabled
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface lo, ::1#123 Enabled
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 11:47:36 nagios ntpd[29528]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 11:47:36 nagios ntpd[29528]: kernel time sync status 0040
Jan  9 11:47:45 nagios ntpd[29528]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 11:51:07 nagios ntpd[29528]: synchronized to LOCAL(0), stratum 10
Jan  9 11:51:07 nagios ntpd[29528]: kernel time sync enabled 0001
Jan  9 11:59:44 nagios ntpd[29528]: ntpd exiting on signal 15
Jan  9 11:59:45 nagios ntpd[30499]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 11:59:45 nagios ntpd[30500]: precision = 1.000 usec
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface wildcard, ::#123 Disabled
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface lo, ::1#123 Enabled
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 11:59:45 nagios ntpd[30500]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 11:59:45 nagios ntpd[30500]: kernel time sync status 0040
Jan  9 11:59:45 nagios ntpd[30500]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 12:02:59 nagios ntpd[30500]: synchronized to LOCAL(0), stratum 10
Jan  9 12:02:59 nagios ntpd[30500]: kernel time sync enabled 0001
Jan  9 12:56:45 nagios ntpd[30500]: ntpd exiting on signal 15
Jan  9 12:56:46 nagios ntpd[2156]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 12:56:46 nagios ntpd[2158]: precision = 1.000 usec
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface wildcard, ::#123 Disabled
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface lo, ::1#123 Enabled
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 12:56:46 nagios ntpd[2158]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 12:56:46 nagios ntpd[2158]: kernel time sync status 0040
Jan  9 12:56:46 nagios ntpd[2158]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 12:58:38 nagios ntpd[2158]: ntpd exiting on signal 15
Jan  9 12:58:39 nagios ntpd[2314]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 12:58:39 nagios ntpd[2315]: precision = 1.000 usec
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface wildcard, ::#123 Disabled
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface lo, ::1#123 Enabled
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 12:58:39 nagios ntpd[2315]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 12:58:39 nagios ntpd[2315]: kernel time sync status 0040
Jan  9 12:58:39 nagios ntpd[2315]: 192.168.5.251 is inappropriate address for the fudge command, line ignored
Jan  9 12:58:39 nagios ntpd[2315]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 13:03:34 nagios ntpd[2315]: ntpd exiting on signal 15
Jan  9 13:03:34 nagios ntpd[2658]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 13:03:34 nagios ntpd[2659]: precision = 1.000 usec
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface wildcard, ::#123 Disabled
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface lo, ::1#123 Enabled
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 13:03:34 nagios ntpd[2659]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 13:03:34 nagios ntpd[2659]: kernel time sync status 0040
Jan  9 13:03:34 nagios ntpd[2659]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 13:06:51 nagios ntpd[2659]: synchronized to LOCAL(0), stratum 10
Jan  9 13:06:51 nagios ntpd[2659]: kernel time sync enabled 0001
Jan  9 13:17:37 nagios ntpd[2659]: ntpd exiting on signal 15
Jan  9 13:17:38 nagios ntpd[3574]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 13:17:38 nagios ntpd[3575]: precision = 1.000 usec
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface wildcard, ::#123 Disabled
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface lo, ::1#123 Enabled
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 13:17:38 nagios ntpd[3575]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 13:17:38 nagios ntpd[3575]: kernel time sync status 0040
Jan  9 13:17:38 nagios ntpd[3575]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 13:28:28 nagios ntpd[4354]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 13:28:28 nagios ntpd[4355]: precision = 1.000 usec
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface wildcard, ::#123 Disabled
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface lo, ::1#123 Enabled
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 13:28:28 nagios ntpd[4355]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 13:28:28 nagios ntpd[4355]: kernel time sync status 0040
Jan  9 13:28:28 nagios ntpd[4355]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 13:38:48 nagios ntpd[5128]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 13:38:48 nagios ntpd[5129]: precision = 1.000 usec
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface wildcard, ::#123 Disabled
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface lo, ::1#123 Enabled
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 13:38:48 nagios ntpd[5129]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 13:38:48 nagios ntpd[5129]: kernel time sync status 0040
Jan  9 13:38:48 nagios ntpd[5129]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 15:08:23 nagios ntpd[12462]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 15:08:23 nagios ntpd[12463]: precision = 1.000 usec
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface wildcard, ::#123 Disabled
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface lo, ::1#123 Enabled
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 15:08:23 nagios ntpd[12463]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 15:08:23 nagios ntpd[12463]: kernel time sync status 0040
Jan  9 15:08:23 nagios ntpd[12463]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 15:16:31 nagios ntpd[13174]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 15:16:31 nagios ntpd[13175]: precision = 1.000 usec
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface wildcard, ::#123 Disabled
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface lo, ::1#123 Enabled
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 15:16:31 nagios ntpd[13175]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 15:16:31 nagios ntpd[13175]: kernel time sync status 0040
Jan  9 15:16:31 nagios ntpd[13175]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
Jan  9 15:05:29 nagios ntpd[13372]: ntpd 4.2.2p1@1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
Jan  9 15:05:29 nagios ntpd[13373]: precision = 1.000 usec
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface wildcard, ::#123 Disabled
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface lo, ::1#123 Enabled
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface eth0, fe80::215:5dff:fe05:e010#123 Enabled
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface lo, 127.0.0.1#123 Enabled
Jan  9 15:05:29 nagios ntpd[13373]: Listening on interface eth0, 192.168.5.240#123 Enabled
Jan  9 15:05:29 nagios ntpd[13373]: kernel time sync status 0040
Jan  9 15:05:29 nagios ntpd[13373]: frequency initialized 0.000 PPM from /var/lib/ntp/drift

the time on this server is going too fast to the future. when i do a cronjob to start ntp manually to synchronize, i have a problem this nagios checks..

The server is synchronized only when trying this:
Code:

service ntpd stop
ntpdate 192.168.10.242

any ideas? thanks

LeoPap 01-09-2013 09:34 AM

Hello,

did you try to give ntpd direct address?

Example: ntpdate 129.6.15.28

luffywallis 01-09-2013 09:51 AM

Quote:

Originally Posted by LeoPap (Post 4866203)
Hello,

did you try to give ntpd direct address?

Example: ntpdate 129.6.15.28

Yes, as i said in the end of my initial post, when i stop ntpd and do a manual sync with ntpdate, it works, the sync is done

LeoPap 01-09-2013 09:58 AM

Sorry i missed that!!

Have you set ntp start when the system loads?

luffywallis 01-09-2013 10:14 AM

Quote:

Originally Posted by LeoPap (Post 4866231)
Sorry i missed that!!

Have you set ntp start when the system loads?

i think so (with command chkconfig ntpd on)
but i didn't restart the server...should i?

LeoPap 01-09-2013 10:21 AM

The command is correct...Give it a try.
Usually ( with external servers) it takes up to five minute to synchronize with a server.
Now in your case you are saying that you want to synchronize it with a windows server..

If the synchronization is working fine with "ntpdate 192.168.10.242" command, then add this command to /etc/rc.local in order to start everytime you boot your system.

michaelk 01-09-2013 02:21 PM

This might work for you:

http://hardanswers.net/correct-clock...centos-hyper-v

luffywallis 01-28-2013 02:30 AM

Quote:

Originally Posted by michaelk (Post 4866415)

Thanks Michael! it works


All times are GMT -5. The time now is 08:58 PM.