LinuxQuestions.org - NS2 and Aquasim

- Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)

- - NS2 and Aquasim (https://www.linuxquestions.org/questions/linux-software-2/ns2-and-aquasim-932264/)

Hi
I am working on a project based on underwater environment. I have Ubuntu 11.4 installed. Also I have installed NS2-2.34. I want to install aquasim for simulation purposes. Can anyone please guide me about the installation procedures and give me some links of the tutorials.

Thanks

Welcome to LQ.

Some hints about Aquasim in these two threads ..
http://www.linuxquestions.org/questi...quasim-855532/

http://www.linuxquestions.org/questi...otocol-890215/

Aquasim is for ns-2.30 :
You can have more than one version of ns-allinone-2.xx installed.
Except that Ubuntu 11.xx (12.xx?) is worst choice for special software.
g++41-compat-4.1.2_i386.deb, gcc41-compat-4.1.2_i386.deb may work :
export CC=gcc41 CXX=g++41 && ./install

.

Hi Knudfl,

I followed your instructions in this thread and also the links to the previous threads you provided.
Got the following results.
Please help.

Platform: Ubuntu 11.04
NS2.34 already installed.
As you said, it supports more than one version of NS. So, now installing NS-allinone-2.30 and Aqua-sim for NS-2.30.

Quote:

============================================================
* Testing for Cygwin environment
============================================================
Cygwin not detected, proceeding with regular install.
============================================================
* Build XGraph-12.1
============================================================
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking if malloc debugging is wanted... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.
make: *** No targets specified and no makefile found. Stop.
Can not create xgraph; But xgraph is an optional package, continuing...
============================================================
* Build CWeb
============================================================
Making cweb
gcc -g -c -o ctangle.o ctangle.c
ctangle.w:75:12: warning: conflicting types for built-in function ‘strlen’
gcc -g -DCWEBINPUTS=\"/usr/local/lib/cweb\" -c common.c
common.w:1409:12: warning: conflicting types for built-in function ‘strlen’
common.w: In function ‘fatal’:
common.w:1176:1: warning: format not a string literal and no format arguments
gcc -g -o ctangle ctangle.o common.o
gcc -g -c -o cweave.o cweave.c
cweave.w:79:12: warning: conflicting types for built-in function ‘strlen’
cweave.w: In function ‘print_cat’:
cweave.w:1739:1: warning: format not a string literal and no format arguments
gcc -g -o cweave cweave.o common.o
ln: creating symbolic link `cweave': File exists
ln: creating symbolic link `ctangle': File exists
============================================================
* Build Stanford GraphBase
============================================================
Making sgb
gcc41 -g -I/usr/local/sgb/include -DDATA_DIRECTORY=\"/usr/local/sgb/data/\" -c gb_io.c
make: gcc41: Command not found
make: *** [gb_io.o] Error 127
Unable to create sgb library, but it's optional, so continuing...
============================================================
* Build GT-ITM
============================================================
sgb lib not found. gt-itm & sgb2ns could not be installed. Continuing..
============================================================
* Build zlib
============================================================
Building static library libz.a version 1.2.3 with gcc41.
Checking for unistd.h... No.
Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()
Checking for snprintf() in stdio.h... No.
WARNING: snprintf() not found, falling back to sprintf(). zlib
can build but will be open to possible buffer-overflow security
vulnerabilities.
Checking for return value of sprintf()... No.
WARNING: apparently sprintf() does not return a value. zlib
can build but will be open to possible string-format security
vulnerabilities.
Checking for errno.h... No.
Checking for mmap support... No.
gcc41 -O -DNO_snprintf -DHAS_sprintf_void -DNO_ERRNO_H -c -o example.o example.c
make: gcc41: Command not found
make: *** [example.o] Error 127
Zlib make failed, but it's optional Continue ...
============================================================
* Build tcl8.4.13
============================================================
rm -f *.a *.o libtcl* core errs *~ \#* TAGS *.E a.out \
errors tclsh tcltest lib.exp Tcl
cd dltest ; make clean
make[1]: Entering directory `/home/urvashi/ns-allinone-2.30/tcl8.4.13/unix/dltest'
rm -f *.o config.cache config.log config.status
rm -f lib.exp ../dltest.marker
rm -f *.so
make[1]: Leaving directory `/home/urvashi/ns-allinone-2.30/tcl8.4.13/unix/dltest'
rm -rf Makefile config.status config.cache config.log tclConfig.sh \
SCRPtcl.* prototype *.plist Tcl.framework
cd dltest ; make distclean
make[1]: Entering directory `/home/urvashi/ns-allinone-2.30/tcl8.4.13/unix/dltest'
rm -f *.o config.cache config.log config.status
rm -f lib.exp ../dltest.marker
rm -f *.so
rm -f Makefile
make[1]: Leaving directory `/home/urvashi/ns-allinone-2.30/tcl8.4.13/unix/dltest'
creating cache ./config.cache
checking whether to use symlinks for manpages... no
checking whether to compress the manpages... no
checking whether to add a package name suffix for the manpages... no
checking for gcc... gcc41
checking whether the C compiler (gcc41 ) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.
tcl8.3.2 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see Scripticscom
to see if they have a fix for your platform.

Hi knudlf

Thanks for the reply but the commands that you mentioned are not running. They give an error "Command not found". Can you please elaborate or suggest a differnt way.

Hi Satyaveer
I have tried this link before but coul'nt decipher the following:
"essential libs for the installation of ns-allinone-2.30. Usually, it requires gcc/g++
complier, automake, X11 lib. To make Aqua3D works, some other packages, such as
freeglut, GTK+ 2.0 and wxGTK-2.8.11, are also required ."

How can i install the above said?
also when i try without above sets, it gives some gcc not found error.
Please help

Generally for all ns2, all Ubuntu :
sudo apt-get install g++ make autoconf automake libtool libxmu-dev

Ubuntu 11.04 : ( Read post #2 )
sudo dpkg -i gcc41-compat-4.1.2_i386.deb g++41-compat-4.1.2_i386.deb
gcc41-compat https://docs.google.com/open?id=0B7S...RjNjJhOTZjNjI2
g++41-compat https://docs.google.com/open?id=0B7S...hjMjljN2M2MGU4

gtk+2 : always installed by default.
wxGTK-2.8.11 and freeglut :
sudo apt-get install libwxgtk2.8-dev freeglut3-dev

And please read this other thread about Ubuntu 11.04 (11.10)
http://www.linuxquestions.org/questi...1-04-a-921068/
"No old Ubuntu compilers .. will work in Ubuntu 11.04 and 11.10"
( And none of the defult g++ 4.4 , 4.5 , 4.6 will work with ns-2.30 ).

.

hi Kundfl,

Thanks for your reply.
commands that you told, worked.

when I gave the command ./install
it gave this result
1.

Quote:

/home/urvashi/ns-allinone-2.30/otcl-1.12/otcl.c:495: undefined reference to `__stack_chk_fail_local'
otcl.o: In function `Otcl_Init':
/home/urvashi/ns-allinone-2.30/otcl-1.12/otcl.c:2284: undefined reference to `__stack_chk_fail_local'
ld: libotcl.so: hidden symbol `__stack_chk_fail_local' isn't defined
ld: final link failed: Nonrepresentable section on output
make: *** [libotcl.so] Error 1
otcl-1.13 make failed! Exiting ...
See http://www.isi.edu/nsnam/ns/ns-problems.html for problems

Then I read http://www.linuxquestions.org/questi...a-921068/other posts at http://www.linuxquestions.org/questi...1-04-a-921068/
and
http://nsnam.isi.edu/nsnam/index.php...allation_Guide

So, made changes in the file otcl-1.12/makefile.in
CC= gcc-4.2
and added SHLIB_LD="gcc -shared" to otcl-1.12/configure

it gave following results.

2.

Quote:

configure: creating ./config.status
config.status: creating Makefile
rm -f libotcl.so otcl.o so_locations
gcc-4.2 -c -g -O2 -DNDEBUG -DUSE_SHM -fpic -I. -I/home/urvashi/ns-allinone-2.30/include -I/home/urvashi/ns-allinone-2.30/include -I/home/urvashi/ns-allinone-2.30/include -I/include otcl.c
make: gcc-4.2: Command not found
make: *** [libotcl.so] Error 127
otcl-1.12 make failed! Exiting ...
See http://www.isi.edu/nsnam/ns/ns-problems.html for problems

Please Help.

#7, @emmashi : Please read posts #2 and #6 :
You will have to download and install the compilers.
( Ubuntu 11.04 : It's not gcc-4.2, but gcc41 ( and g++41 ).

sudo dpkg -i gcc41-compat-4.1.3_i386.deb g++41-compat-4.1.2_i386.deb
.. Then reboot, and the new compilers can be used.

And :
cd ns-allinone-2.30/ && export CC=gcc41 CXX=g++41 && ./install

.

Quote:

sudo dpkg -i gcc41-compat-4.1.3_i386.deb g++41-compat-4.1.2_i386.deb
sudo dpkg -i gcc41-compat-4.1.3_i386.deb g++41-compat-4.1.2_i386.deb

this command is not working.
I have downloaded it from the link you provided.
Also, i tried the installation from synaptic manager. but it didn't work.

It gives the following error.

Quote:

dpkg: error processing gcc41-compat-4.1.2_i386.deb (--install):
cannot access archive: No such file or directory
dpkg: error processing g++41-compat-4.1.2_i386.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
gcc41-compat-4.1.2_i386.deb
g++41-compat-4.1.2_i386.deb

I don't know what to do now. Please help.

#9.

The first command is 'pwd', if you don't know your location.
Most terminals will open in /home/<name>/.
Some in /home/<name>/Documents/.
Depending on your settings in /home/<name>/.config/user-dirs.dirs

Then change to the directory with files to be installed.
Like : cd Downloads/ ; sudo dpkg -i <package> <package>

.

thank you so much knudfl, it worked. :)

but some important notices were given at the end to change some path variables, I did that.
next it asked to run command
cd ns-2.30
and then ./validate

but command ./validate did not work.

what should I do next? Need help again.

Quote:

validate overall report: some tests failed:
./test-all-simple ./test-all-tcp ./test-all-testReno ./test-all-newreno ./test-all-sack ./test-all-tcpOptions ./test-all-tcpReset ./test-all-simple-full ./test-all-full ./test-all-testReno-full ./test-all-testReno-bayfull ./test-all-sack-full ./test-all-tcp-init-win ./test-all-tcpVariants ./test-all-LimTransmit ./test-all-aimd ./test-all-greis ./test-all-rfc793edu ./test-all-rfc2581 ./test-all-rbp ./test-all-sctp ./test-all-tcpHighspeed ./test-all-frto ./test-all-friendly ./test-all-srm ./test-all-realaudio ./test-all-ecn ./test-all-ecn-ack ./test-all-ecn-full ./test-all-quickstart ./test-all-diffusion3 ./test-all-smac ./test-all-smac-multihop ./test-all-manual-routing ./test-all-hier-routing ./test-all-algo-routing ./test-all-lan ./test-all-mcast ./test-all-vc ./test-all-session ./test-all-mixmode ./test-all-red ./test-all-adaptive-red ./test-all-red-pd ./test-all-rio ./test-all-vq ./test-all-rem ./test-all-gk ./test-all-pi ./test-all-cbq ./test-all-schedule ./test-all-rr ./test-all-monitor ./test-all-jobs ./test-all-intserv ./test-all-diffserv ./test-all-webcache ./test-all-mcache ./test-all-webtraf ./test-all-simultaneous ./test-all-mip ./test-all-links ./test-all-plm ./test-all-linkstate ./test-all-mpls ./test-all-oddBehaviors ./test-all-wireless-shadowing ./test-all-wireless-lan-aodv ./test-all-wireless-tdma ./test-all-wireless-gridkeeper ./test-all-wireless-diffusion ./test-all-wireless-lan-newnode ./test-all-satellite ./test-all-WLtutorial ./test-all-source-routing ./test-all-misc ./test-all-tagged-trace ./test-all-message ./test-all-rng ./test-all-xcp ./test-all-wpan ./test-all-energy ./test-all-snoop ./test-all-packmime ./test-all-delaybox
to re-run a specific test, cd tcl/test; ./test-all-TEST-NAME
Notice that some tests in webcache will fail on freebsd when -O is turned on.
This is due to some event reordering, which will disappear when -g is turned on.

Aquasim, ns-2.30 ..

Using the Fedora / CentOS compiler, compat-gcc-34-c++-3.4.6-4,
on PCLinuxOS-2011 the result is :

Code:

validate overall report: some tests failed:

    ./test-all-wireless-shadowing ./test-all-WLtutorial

A similar result would probably be achieved with Mandriva, CentOS, Fedora, Scientific.

Ubuntu 11.04 and 11.10 : Not the best choice for ns2.
? May be Ubuntu 10.04 will make a better result ? ?

.

thanks kundfl.
i'll try it with Ubuntu 10.04

hi
i have installed ubuntu 10.04 and am getting the following error while installing ns-allinone-2.30

Quote:

make: ***[tk3d.o] Error 1
tk8.4.13 make failed! Exiting...

please Help

Hi
does anyone know the gcc version for ubuntu 10.04.4
i want to install ns 2.30 and aquasim and getting the following error.

Quote:

make: gcc-4.3: Command not found
make: *** [libotcl.so] Error 127
otcl-1.12 make failed! Exiting ...

Please help