LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)
-   -   no wireless after upgrading to ubuntu 9.0.4 from 8.10 (https://www.linuxquestions.org/questions/linux-software-2/no-wireless-after-upgrading-to-ubuntu-9-0-4-from-8-10-a-728891/)

unix1adm 05-27-2009 12:46 PM
no wireless after upgrading to ubuntu 9.0.4 from 8.10
 
my system is an IBM r51. it was wokinng fine except that mozilla kept locking up. So I updated to ubuntu 9.0.04. I can see my cell modem and my hard wired line but not my wireless.

anyone have this happen after they upgraded?
Everything was fine on that but now it seems like 9.0.4 has lost its drives etc? HELP...

unix1adm 05-27-2009 02:07 PM
root@cj454-lt:~# lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
02:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
03:00.0 USB Controller: NEC Corporation USB (rev 43)
03:00.1 USB Controller: NEC Corporation USB (rev 43)

unix1adm 05-27-2009 02:11 PM
[ 0.565229] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
[ 0.565234] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.565239] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.565243] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
[ 0.565250] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
[ 0.565255] pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff
[ 0.565273] pci 0000:00:1e.0: setting latency timer to 64
[ 0.565794] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.565798] PCI: setting IRQ 11 as level-triggered
[ 0.565803] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.565810] bus: 00 index 0 io port: [0, ffff]
[ 0.565813] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.565816] bus: 01 index 0 io port: [3000, 3fff]
[ 0.565818] bus: 01 index 1 mmio: [c0100000, c01fffff]
[ 0.565821] bus: 01 index 2 mmio: [e0000000, e7ffffff]
[ 0.565824] bus: 01 index 3 mmio: [0, 0]
[ 0.565826] bus: 02 index 0 io port: [4000, 8fff]
[ 0.565829] bus: 02 index 1 mmio: [c0200000, cfffffff]
[ 0.565832] bus: 02 index 2 mmio: [e8000000, efffffff]
[ 0.565835] bus: 02 index 3 io port: [0, ffff]
[ 0.565837] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.565840] bus: 03 index 0 io port: [4000, 40ff]
[ 0.565842] bus: 03 index 1 io port: [4400, 44ff]
[ 0.565845] bus: 03 index 2 mmio: [e8000000, ebffffff]
[ 0.565848] bus: 03 index 3 mmio: [c4000000, c7ffffff]
[ 0.565859] NET: Registered protocol family 2
[ 0.566006] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.566298] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.567227] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.567872] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.567877] TCP reno registered
[ 0.568072] NET: Registered protocol family 1
[ 0.568230] checking if image is initramfs... it is
[ 1.068084] Switched to high resolution mode on CPU 0
[ 1.434688] Freeing initrd memory: 8006k freed
[ 1.434988] Simple Boot Flag at 0x35 set to 0x1
[ 1.435508] audit: initializing netlink socket (disabled)
[ 1.435532] type=2000 audit(1243436751.432:1): initialized
[ 1.443340] highmem bounce pool size: 64 pages
[ 1.443348] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.446238] VFS: Disk quotas dquot_6.5.1
[ 1.446347] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.446485] msgmni has been set to 1752
[ 1.446643] io scheduler noop registered
[ 1.446647] io scheduler anticipatory registered
[ 1.446650] io scheduler deadline registered
[ 1.446665] io scheduler cfq registered (default)
[ 1.446755] pci 0000:01:00.0: Boot video device
[ 1.446770] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.447174] isapnp: Scanning for PnP cards...
[ 1.800181] isapnp: No Plug & Play device found
[ 1.842474] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.843807] serial 00:0a: activated
[ 1.844096] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.844807] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.844813] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.844822] serial 0000:00:1f.6: PCI INT B disabled
[ 1.846737] brd: module loaded
[ 1.846827] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.846977] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.852183] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.852195] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.852559] mice: PS/2 mouse device common for all mice
[ 1.852735] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.852753] rtc0: alarms up to one month, y3k
[ 1.852889] EISA: Probing bus 0 at eisa.0
[ 1.852896] Cannot allocate resource for EISA slot 1
[ 1.852899] Cannot allocate resource for EISA slot 2
[ 1.852902] Cannot allocate resource for EISA slot 3
[ 1.852905] Cannot allocate resource for EISA slot 4
[ 1.852908] Cannot allocate resource for EISA slot 5
[ 1.852910] Cannot allocate resource for EISA slot 6
[ 1.852913] Cannot allocate resource for EISA slot 7
[ 1.852916] Cannot allocate resource for EISA slot 8
[ 1.852918] EISA: Detected 0 cards.
[ 1.852923] cpuidle: using governor ladder
[ 1.852926] cpuidle: using governor menu
[ 1.853523] TCP cubic registered
[ 1.853555] Using IPI No-Shortcut mode
[ 1.853797] registered taskstats version 1
[ 1.853932] Magic number: 9:127:84
[ 1.854081] rtc_cmos 00:06: setting system clock to 2009-05-27 15:05:52 UTC (1243436752)
[ 1.854085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.854088] EDD information not available.
[ 1.854416] Freeing unused kernel memory: 424k freed
[ 1.854473] Write protecting the kernel text: 2576k
[ 1.854507] Write protecting the kernel read-only data: 936k
[ 1.857487] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.095332] fuse init (API version 7.9)
[ 2.330974] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.335998] processor ACPI0007:00: registered as cooling_device0
[ 2.336018] ACPI: Processor [CPU] (supports 8 throttling states)
[ 2.364797] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.366300] ACPI: Thermal Zone [THM0] (70 C)
[ 3.253731] ACPI: ACPI Dock Station Driver
[ 3.392106] usbcore: registered new interface driver usbfs
[ 3.392142] usbcore: registered new interface driver hub
[ 3.402678] usbcore: registered new device driver usb
[ 3.405459] USB Universal Host Controller Interface driver v3.0
[ 3.409053] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 3.409066] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.409078] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.409082] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.409138] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.409167] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 3.409390] usb usb1: configuration #1 chosen from 1 choice
[ 3.409423] hub 1-0:1.0: USB hub found
[ 3.409433] hub 1-0:1.0: 2 ports detected
[ 3.511609] SCSI subsystem initialized
[ 3.512801] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 3.513307] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 3.513313] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 3.513324] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.513328] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.513359] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.513384] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 3.513501] usb usb2: configuration #1 chosen from 1 choice
[ 3.513539] hub 2-0:1.0: USB hub found
[ 3.513547] hub 2-0:1.0: 2 ports detected
[ 3.616932] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 3.616939] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.616951] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.616955] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.616995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.617022] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 3.617142] usb usb3: configuration #1 chosen from 1 choice
[ 3.617178] hub 3-0:1.0: USB hub found
[ 3.617187] hub 3-0:1.0: 2 ports detected
[ 3.622558] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 3.622562] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.626742] libata version 3.00 loaded.
[ 3.721120] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 3.721626] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 3.721632] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 3.721652] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.721657] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.721690] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.725608] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.725615] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.725626] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 3.740027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.740166] usb usb4: configuration #1 chosen from 1 choice
[ 3.740201] hub 4-0:1.0: USB hub found
[ 3.740209] hub 4-0:1.0: 6 ports detected
[ 3.846226] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 3.846233] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 3.870502] e100 0000:02:08.0: PME# disabled
[ 3.873709] e100: eth0: e100_probe: addr 0xc0210000, irq 11, MAC addr 00:11:25:86:3d:04
[ 3.876871] pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
[ 3.876880] pata_acpi 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.876918] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.876935] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.881259] ata_piix 0000:00:1f.1: version 2.12
[ 3.881268] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.881298] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.882278] scsi0 : ata_piix
[ 3.882404] scsi1 : ata_piix
[ 3.883762] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 3.883766] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 4.100302] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
[ 4.100307] ata1.00: 488397168 sectors, multi 16: LBA48
[ 4.108899] ata1.00: configured for UDMA/100
[ 4.268010] Marking TSC unstable due to TSC halts in idle
[ 4.272338] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0202, max UDMA/33
[ 4.288270] ata2.00: configured for UDMA/33
[ 4.288420] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
[ 4.293622] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0202 PQ: 0 ANSI: 5
[ 4.305960] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.306004] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.331390] Driver 'sd' needs updating - please use bus_type methods
[ 4.331527] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 4.331557] sd 0:0:0:0: [sda] Write Protect is off
[ 4.331560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.331608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.331705] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 4.331731] sd 0:0:0:0: [sda] Write Protect is off
[ 4.331735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.331782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.331788] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.342441] sda1 sda2 sda3 sda4
[ 4.360421] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.375928] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.375933] Uniform CD-ROM driver Revision: 3.20
[ 4.376096] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.064113] Clocksource tsc unstable (delta = -78240442 ns)
[ 9.885760] kjournald starting. Commit interval 5 seconds
[ 9.885777] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.120444] udev: starting version 141
[ 16.297340] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.321432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.386034] irda_init()
[ 16.386047] NET: Registered protocol family 23
[ 16.646276] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.652118] ACPI: Power Button (FF) [PWRF]
[ 16.652210] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 16.652760] ACPI: Lid Switch [LID]
[ 16.654102] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 16.661754] ACPI: Battery Slot [BAT0] (battery present)
[ 16.666446] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 16.666453] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 16.666564] ACPI: Error installing bay notify handler
[ 16.668055] ACPI: Sleep Button (CM) [SLPB]
[ 16.669030] ACPI: AC Adapter [AC] (on-line)
[ 16.669482] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5
[ 16.684129] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 16.692207] Linux agpgart interface v0.103
[ 16.720364] nsc-ircc 00:0c: activated
[ 16.720370] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 16.720549] nsc-ircc, chip->init
[ 16.720558] nsc-ircc, Found chip at base=0x02e
[ 16.720582] nsc-ircc, driver loaded (Dag Brattli)
[ 16.721041] IrDA: Registered device irda0
[ 16.721044] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 16.731336] Non-volatile memory driver v1.2
[ 16.799926] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.965967] intel_rng: FWH not detected
[ 17.020992] parport_pc 00:0b: reported by Plug and Play ACPI
[ 17.021035] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 17.048734] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 17.063774] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 17.379199] iTCO_vendor_support: vendor-support=0
[ 17.392097] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
[ 17.392117] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 17.392119] Yenta: Routing CardBus interrupts to PCI
[ 17.392125] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
[ 17.419107] ppdev: user-space parallel port driver
[ 17.419376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 17.625916] Yenta: ISA IRQ mask 0x0430, PCI irq 11
[ 17.625921] Socket status: 30000020
[ 17.625926] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 17.625929] cs: IO port probe 0x4000-0x8fff: clean.
[ 17.627330] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 17.627333] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 17.705810] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 17.705833] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 18.029786] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 18.029792] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 18.081625] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 18.085161] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 18.085165] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 18.085168] thinkpad_acpi: ThinkPad BIOS 1RETDJWW (3.15 ), EC 1RHT71WW-3.04
[ 18.085171] thinkpad_acpi: IBM ThinkPad R51, model 1830WCW
[ 18.089415] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 18.089479] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.090451] Registered led device: tpacpi::thinklight
[ 18.090716] thinkpad_acpi: another device driver is already handling bay events
[ 18.090720] thinkpad_acpi: disabling subdriver bay
[ 18.090753] Registered led device: tpacpi::power
[ 18.090771] Registered led device: tpacpi:orange:batt
[ 18.090789] Registered led device: tpacpi:green:batt
[ 18.090807] Registered led device: tpacpi::dock_active
[ 18.090825] Registered led device: tpacpi::bay_active
[ 18.090843] Registered led device: tpacpi::dock_batt
[ 18.090861] Registered led device: tpacpi::unknown_led
[ 18.090879] Registered led device: tpacpi::standby
[ 18.093837] input: ThinkPad Extra Buttons as /devices/virtual/input/input8
[ 18.264125] pccard: CardBus card inserted into slot 0
[ 18.264165] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, fff]
[ 18.264217] pci 0000:03:00.0: supports D1
[ 18.264219] pci 0000:03:00.0: supports D2
[ 18.264222] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 18.264228] pci 0000:03:00.0: PME# disabled
[ 18.264262] PCI: 0000:03:00.1 reg 10 32bit mmio: [0, fff]
[ 18.264311] pci 0000:03:00.1: supports D1
[ 18.264313] pci 0000:03:00.1: supports D2
[ 18.264316] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[ 18.264321] pci 0000:03:00.1: PME# disabled
[ 18.408884] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.442999] cs: IO port probe 0x100-0x3af: clean.
[ 18.444036] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.444469] cs: IO port probe 0x820-0x8ff: clean.
[ 18.444836] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.445350] cs: IO port probe 0xa00-0xaff: clean.
[ 18.632042] intel8x0_measure_ac97_clock: measured 55357 usecs
[ 18.632046] intel8x0: clocking to 48000
[ 18.634248] ohci_hcd 0000:03:00.0: enabling device (0000 -> 0002)
[ 18.634262] ohci_hcd 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.634281] ohci_hcd 0000:03:00.0: setting latency timer to 64
[ 18.634285] ohci_hcd 0000:03:00.0: OHCI Host Controller
[ 18.634415] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 18.634435] ohci_hcd 0000:03:00.0: irq 11, io mem 0xc4000000
[ 18.720727] usb usb5: configuration #1 chosen from 1 choice
[ 18.721000] hub 5-0:1.0: USB hub found
[ 18.721015] hub 5-0:1.0: 1 port detected
[ 18.824400] ohci_hcd 0000:03:00.1: enabling device (0000 -> 0002)
[ 18.824413] ohci_hcd 0000:03:00.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.824440] ohci_hcd 0000:03:00.1: setting latency timer to 64
[ 18.824444] ohci_hcd 0000:03:00.1: OHCI Host Controller
[ 18.825284] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 6
[ 18.825310] ohci_hcd 0000:03:00.1: irq 11, io mem 0xc4001000
[ 18.911238] usb usb6: configuration #1 chosen from 1 choice
[ 18.913553] hub 6-0:1.0: USB hub found
[ 18.913726] hub 6-0:1.0: 1 port detected
[ 19.161414] lp0: using parport0 (interrupt-driven).
[ 19.822024] EXT3 FS on sda1, internal journal
[ 20.433678] type=1505 audit(1243436771.077:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3977
[ 20.496600] type=1505 audit(1243436771.141:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=3981
[ 20.496756] type=1505 audit(1243436771.141:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=3981
[ 20.496813] type=1505 audit(1243436771.141:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=3981
[ 20.496862] type=1505 audit(1243436771.141:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=3981
[ 20.682371] type=1505 audit(1243436771.325:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3986
[ 20.682689] type=1505 audit(1243436771.325:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3986
[ 20.718582] type=1505 audit(1243436771.361:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=3990
[ 21.099674] ACPI: WMI: Mapper loaded
[ 21.153875] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 21.153883] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 21.153919] ACPI: Error installing bay notify handler
[ 21.536048] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 21.750731] usb 5-1: configuration #1 chosen from 1 choice
[ 21.785612] cdc_acm 5-1:1.0: ttyACM0: USB ACM device
[ 21.790269] usbcore: registered new interface driver cdc_acm
[ 21.790393] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 23.410344] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 23.633145] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 24.797225] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 24.797234] vboxdrv: Successfully done.
[ 24.797237] vboxdrv: Found 1 processor cores.
[ 24.798000] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.798007] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 26.210881] Bluetooth: Core ver 2.13
[ 26.212672] NET: Registered protocol family 31
[ 26.212687] Bluetooth: HCI device and connection manager initialized
[ 26.212691] Bluetooth: HCI socket layer initialized
[ 26.236142] Bluetooth: L2CAP ver 2.11
[ 26.236151] Bluetooth: L2CAP socket layer initialized
[ 26.244949] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.244957] Bluetooth: SCO socket layer initialized
[ 26.253604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.253612] Bluetooth: BNEP filters: protocol multicast
[ 26.296884] Bridge firewalling registered
[ 26.297724] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 26.431180] Bluetooth: RFCOMM socket layer initialized
[ 26.431445] Bluetooth: RFCOMM TTY layer initialized
[ 26.431452] Bluetooth: RFCOMM ver 1.10
[ 27.805005] pci 0000:01:00.0: power state changed by ACPI to D0
[ 27.805412] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.860359] [drm] Initialized drm 1.1.0 20060810
[ 27.882700] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 28.152098] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 28.152130] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 28.152168] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 28.386195] [drm] Setting GART location based on new memory map
[ 28.386210] [drm] Loading R100 Microcode
[ 28.386265] [drm] writeback test succeeded in 2 usecs
[ 33.222373] NET: Registered protocol family 10
[ 33.224251] lo: Disabled Privacy Extensions
[ 33.225596] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 792.000142] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 792.000487] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 792.480064] NET: Registered protocol family 17
[ 802.792035] eth0: no IPv6 routers present
[ 996.000325] e100: eth0: e100_watchdog: link down
[ 2788.000139] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 3352.000330] e100: eth0: e100_watchdog: link down
[14190.000137] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
root@cj454-lt:~#

unix1adm 05-27-2009 02:19 PM
root@cj454-lt:~# lshw -C network
*-network:0 UNCLAIMED
description: Ethernet controller
product: AR5212 802.11abg NIC
vendor: Atheros Communications Inc.
physical id: 2
bus info: pci@0000:02:02.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=80 maxlatency=28 mingnt=10
*-network:1
description: Ethernet interface
product: 82801DB PRO/100 VE (MOB) Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 81
serial: 00:11:25:86:3d:04
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.23-k4-NAPI duplex=half firmware=N/A latency=66 link=no maxlatency=56 mingnt=8 module=e100 multicast=yes port=MII speed=10MB/s
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: ea:df:7b:09:4b:8f
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

unix1adm 05-28-2009 06:11 AM
in case anyone else runs into this...i found it... administration hardware drivers.

the drive was not activated.


All times are GMT -5. The time now is 02:50 PM.