My 6.1 Surround Sound stopped working
For no reason i have ALSA installed and XMMS is using that it just stopped for no reason. Any ideas??
|
No idea........need more info.--like a post of your
dmesg did you read the error logs in /var/log??? |
demsg
[gizim@localhost gizim]$ dmesg bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. zapping low mappings. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0 ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000 ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040 ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff5880 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=023c7000 soft=023c6000 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1394.478 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 775120k/786368k available (2012k kernel code, 10456k reserved, 651k data, 140k init, 0k highmem) Calibrating delay loop... 2736.12 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183f3ff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) processor stepping 04 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 188k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ11 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5 vesafb: probe of vesafb0 failed with error -6 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1094294408.837:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9488DB81FF525AA3 - User ID: Red Hat, Inc. (Kernel Module GPG key) ksign: invalid packet (ctb=00) Unable to load default keyring: error=74 Applying VIA southbridge workaround. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio hda: ST330621A, ATA DISK drive hdb: WDC WD800BB-00CAA1, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/63, UDMA(100) hda: hda1 hda2 hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 140k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks NET: Registered protocol family 10 Disabled Privacy Extensions on device 0235c2a0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:0d.2: EHCI Host Controller ehci_hcd 0000:00:0d.2: irq 5, pci mem 32868000 ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 5, io base 0000c400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: irq 5, io base 0000c800 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:0d.0: UHCI Host Controller uhci_hcd 0000:00:0d.0: irq 10, io base 0000e800 uhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new low speed USB device using address 2 ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:0d.1: UHCI Host Controller uhci_hcd 0000:00:0d.1: irq 11, io base 0000ec00 uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Explorer] on usb-0000:00:07.2-2 EXT3 FS on hda1, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev hdc, sector 891648 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev hdc, sector 0 Adding 818992k swap on /dev/hda2. Priority:-1 extents:1 NTFS driver 2.1.15 [Flags: R/W MODULE]. NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them. NTFS volume version 3.1. NTFS-fs error (device hdb1): ntfs_check_logfile(): The two restart pages in $LogFile do not match. NTFS-fs warning (device hdb1): load_system_files(): Failed to load $LogFile. Will not be able to remount read-write. Mount in Windows. parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 SCSI subsystem initialized inserting floppy driver for 2.6.8-1.521 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[db006000-db0067ff] Max Packet=[2048] Linux Tulip driver version 1.1.13 (May 11, 2002) ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. divert: allocating divert_blk for eth0 eth0: ADMtek Comet rev 17 at 0x32887000, 00:04:E2:06:33:F0, IRQ 10. divert: freeing divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (6143 buckets, 49144 max) - 320 bytes per conntrack Linux Tulip driver version 1.1.13 (May 11, 2002) ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. divert: allocating divert_blk for eth0 eth0: ADMtek Comet rev 17 at 0x32a12000, 00:04:E2:06:33:F0, IRQ 10. eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. eth0: no IPv6 routers present parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). lp0: console ready IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24224 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24281 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24356 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24431 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24479 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24538 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24596 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24640 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24764 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=28242 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=31711 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=35179 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=38798 PROTO=UDP SPT=123 DPT=123 LEN=56 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:07.5 to 64 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=42220 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=45699 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=49219 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=52742 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=56383 PROTO=UDP SPT=123 DPT=123 LEN=56 IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=59998 PROTO=UDP SPT=123 DPT=123 LEN=56 [gizim@localhost gizim]$ |
demsg in /var/log
Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. zapping low mappings. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0 ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000 ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040 ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff5880 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=023c7000 soft=023c6000 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1394.478 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 775120k/786368k available (2012k kernel code, 10456k reserved, 651k data, 140k init, 0k highmem) Calibrating delay loop... 2736.12 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183f3ff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) processor stepping 04 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 188k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ11 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5 vesafb: probe of vesafb0 failed with error -6 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1094294408.837:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9488DB81FF525AA3 - User ID: Red Hat, Inc. (Kernel Module GPG key) ksign: invalid packet (ctb=00) Unable to load default keyring: error=74 Applying VIA southbridge workaround. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio hda: ST330621A, ATA DISK drive hdb: WDC WD800BB-00CAA1, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/63, UDMA(100) hda: hda1 hda2 hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 140k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks NET: Registered protocol family 10 Disabled Privacy Extensions on device 0235c2a0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:0d.2: EHCI Host Controller ehci_hcd 0000:00:0d.2: irq 5, pci mem 32868000 ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 5, io base 0000c400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: irq 5, io base 0000c800 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:0d.0: UHCI Host Controller uhci_hcd 0000:00:0d.0: irq 10, io base 0000e800 uhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new low speed USB device using address 2 ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:0d.1: UHCI Host Controller uhci_hcd 0000:00:0d.1: irq 11, io base 0000ec00 uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:07.2-2 EXT3 FS on hda1, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev hdc, sector 891648 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x51 end_request: I/O error, dev hdc, sector 0 Adding 818992k swap on /dev/hda2. Priority:-1 extents:1 NTFS driver 2.1.15 [Flags: R/W MODULE]. NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them. NTFS volume version 3.1. NTFS-fs error (device hdb1): ntfs_check_logfile(): The two restart pages in $LogFile do not match. NTFS-fs warning (device hdb1): load_system_files(): Failed to load $LogFile. Will not be able to remount read-write. Mount in Windows. |
BUMP
|
i hope you didnot gave up yet! mightbe this will work
alsa mixer has some default settings witch can result in no sound.
$ alsamixer start changing some settings (opening/ closing volume settings etc) hope this works. (worked for me (SB LIVE 5.1) luck Bas (options in xmms are correct??) |
All times are GMT -5. The time now is 01:46 AM. |