LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 01-07-2005, 02:06 AM   #1
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Rep: Reputation: 0
[SOLVED] Multimonitor setup, 1 monitor won't work


Ok, I have a GeForce FX 5600 and a Permedia 2 in my box. I have xorg configured so that both monitors attached to the FX 5600 work and x starts, however the one attached to the PCI card does not work. When I auto configure, this is what the auto-generated file says about the PCI card (note: the PCI cardworks correctly on the auto-generated one, but only 1 of my Geforce monitors works, and everything is low-rez and 8bit color).


Code:
	

Section "Device" 
   Identifier  "Card1" 
   Driver      "glint" 
   VendorName  "3DLabs" 
   BoardName   "Permedia II 2D+3D" 
   BusID       "PCI:1:9:0" 
EndSection

This is my current xorg.conf file:


Code:
	

# File generated by xorgconfig. 

# 
# Copyright 2004 The X.Org Foundation 
# 
# Permission is hereby granted, free of charge, to any person obtaining a 
# copy of this software and associated documentation files (the "Software"), 
# to deal in the Software without restriction, including without limitation 
# the rights to use, copy, modify, merge, publish, distribute, sublicense, 
# and/or sell copies of the Software, and to permit persons to whom the 
# Software is furnished to do so, subject to the following conditions: 
# 
# The above copyright notice and this permission notice shall be included in 
# all copies or substantial portions of the Software. 
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF 
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 
# SOFTWARE. 
# 
# Except as contained in this notice, the name of The X.Org Foundation shall 
# not be used in advertising or otherwise to promote the sale, use or other 
# dealings in this Software without prior written authorization from 
# The X.Org Foundation. 
# 

# ********************************************************************** 
# Refer to the xorg.conf(5x) man page for details about the format of 
# this file. 
# ********************************************************************** 

# ********************************************************************** 
# Module section -- this  section  is used to specify 
# which dynamically loadable modules to load. 
# ********************************************************************** 
# 
Section "Module" 

# This loads the DBE extension module. 

    Load        "dbe"     # Double buffer extension 

# This loads the miscellaneous extensions module, and disables 
# initialisation of the XFree86-DGA extension within that module. 
    SubSection  "extmod" 
      Option    "omit xfree86-dga"   # don't initialise the DGA extension 
    EndSubSection 

# This loads the font modules 
    Load        "type1" 
#    Load        "speedo" 
    Load        "freetype" 
#    Load        "xtt" 

# This loads the GLX module 
    Load       "glx" 
# This loads the DRI module 
#    Load       "dri" 

EndSection 

# ********************************************************************** 
# Files section.  This allows default font and rgb paths to be set 
# ********************************************************************** 

Section "Files" 

# The location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally 
# no need to change the default. 

    RgbPath   "/usr/X11R6/lib/X11/rgb" 

# Multiple FontPath entries are allowed (which are concatenated together), 
# as well as specifying multiple comma-separated entries in one FontPath 
# command (or a combination of both methods) 
# 
# 

    FontPath   "/usr/share/fonts/misc/" 
    FontPath   "/usr/share/fonts/TTF/" 
    FontPath   "/usr/share/fonts/Type1/" 
#    FontPath   "/usr/share/fonts/CID/" 
    FontPath   "/usr/share/fonts/75dpi/" 
    FontPath   "/usr/share/fonts/100dpi/" 
    FontPath   "/usr/share/fonts/local/" 
#    FontPath   "/usr/share/fonts/Speedo/" 
#    FontPath   "/usr/share/fonts/TrueType/" 
#    FontPath   "/usr/share/fonts/freefont/" 

# The module search path.  The default path is shown here. 

#    ModulePath "/usr/X11R6/lib/modules" 

EndSection 

# ********************************************************************** 
# Server flags section. 
# ********************************************************************** 

Section "ServerFlags" 

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may 
# provide a better stack trace in the core dump to aid in debugging 

#    Option "NoTrapSignals" 

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence 
# (where n is 1 through 12).  This allows clients to receive these key 
# events. 

#    Option "DontVTSwitch" 

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence 
# This allows clients to receive this key event. 

#    Option "DontZap" 

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching 
# sequences.  This allows clients to receive these key events. 

#    Option "Dont Zoom" 

# Uncomment this to disable tuning with the xvidtune client. With 
# it the client can still run and fetch card and monitor attributes, 
# but it will not be allowed to change them. If it tries it will 
# receive a protocol error. 

#    Option "DisableVidModeExtension" 

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune" 

# Uncomment this to disable dynamically modifying the input device 
# (mouse and keyboard) settings. 

#    Option "DisableModInDev" 

# Uncomment this to enable the use of a non-local client to 
# change the keyboard or mouse settings (currently only xset). 

#    Option "AllowNonLocalModInDev" 

EndSection 

# ********************************************************************** 
# Input devices 
# ********************************************************************** 

# ********************************************************************** 
# Core keyboard's InputDevice section 
# ********************************************************************** 

Section "InputDevice" 

    Identifier   "Keyboard1" 
    Driver   "kbd" 

# For most OSs the protocol can be omitted (it defaults to "Standard"). 
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), 
# uncomment the following line. 

#    Option     "Protocol"      "Xqueue" 

    Option "AutoRepeat" "500 30" 

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) 
#    Option   "Xleds"      "1 2 3" 

#    Option "LeftAlt"     "Meta" 
#    Option "RightAlt"    "ModeShift" 

# To customise the XKB settings to suit your keyboard, modify the 
# lines below (which are the defaults).  For example, for a non-U.S. 
# keyboard, you will probably want to use: 
#    Option "XkbModel"    "pc102" 
# If you have a US Microsoft Natural keyboard, you can use: 
#    Option "XkbModel"    "microsoft" 
# 
# Then to change the language, change the Layout setting. 
# For example, a german layout can be obtained with: 
#    Option "XkbLayout"   "de" 
# or: 
#    Option "XkbLayout"   "de" 
#    Option "XkbVariant"  "nodeadkeys" 
# 
# If you'd like to switch the positions of your capslock and 
# control keys, use: 
#    Option "XkbOptions"  "ctrl:swapcaps" 

# These are the default XKB settings for Xorg 
#    Option "XkbRules"    "xorg" 
#    Option "XkbModel"    "pc101" 
#    Option "XkbLayout"   "us" 
#    Option "XkbVariant"  "" 
#    Option "XkbOptions"  "" 

#    Option "XkbDisable" 

    Option "XkbRules"   "xorg" 
    Option "XkbModel"   "microsoftpro" 
    Option "XkbLayout"   "us" 

EndSection 


# ********************************************************************** 
# Core Pointer's InputDevice section 
# ********************************************************************** 

Section "InputDevice" 

# Identifier and driver 

    Identifier   "Mouse1" 
    Driver   "mouse" 
    Option "Protocol"    "ExplorerPS/2" 
    Option "Device"      "/dev/mouse" 

# Mouse-speed setting for PS/2 mouse. 

#    Option "Resolution"   "256" 

# When using XQUEUE, comment out the above two lines, and uncomment 
# the following line. 

#    Option "Protocol"   "Xqueue" 

# Baudrate and SampleRate are only for some Logitech mice. In 
# almost every case these lines should be omitted. 

#    Option "BaudRate"   "9600" 
#    Option "SampleRate"   "150" 

# Emulate3Buttons is an option for 2-button Microsoft mice 
# Emulate3Timeout is the timeout in milliseconds (default is 50ms) 

#    Option "Emulate3Buttons" 
#    Option "Emulate3Timeout"    "50" 

# ChordMiddle is an option for some 3-button Logitech mice 

#    Option "ChordMiddle" 

EndSection 


# ********************************************************************** 
# Other input device sections 
# this is optional and is required only if you 
# are using extended input devices.  This is for example only.  Refer 
# to the xorg.conf man page for a description of the options. 
# ********************************************************************** 
# 
# Section "InputDevice" 
#    Identifier  "Mouse2" 
#    Driver      "mouse" 
#    Option      "Protocol"      "MouseMan" 
#    Option      "Device"        "/dev/mouse2" 
# EndSection 
# 
# Section "InputDevice" 
#    Identifier "spaceball" 
#    Driver     "magellan" 
#    Option     "Device"        "/dev/cua0" 
# EndSection 
# 
# Section "InputDevice" 
#    Identifier "spaceball2" 
#    Driver     "spaceorb" 
#    Option     "Device"        "/dev/cua0" 
# EndSection 
# 
# Section "InputDevice" 
#    Identifier "touchscreen0" 
#    Driver     "microtouch" 
#    Option     "Device"        "/dev/ttyS0" 
#    Option     "MinX"          "1412" 
#    Option     "MaxX"          "15184" 
#    Option     "MinY"          "15372" 
#    Option     "MaxY"          "1230" 
#    Option     "ScreenNumber"  "0" 
#    Option     "ReportingMode" "Scaled" 
#    Option     "ButtonNumber"  "1" 
#    Option     "SendCoreEvents" 
# EndSection 
# 
# Section "InputDevice" 
#    Identifier "touchscreen1" 
#    Driver     "elo2300" 
#    Option     "Device"        "/dev/ttyS0" 
#    Option     "MinX"          "231" 
#    Option     "MaxX"          "3868" 
#    Option     "MinY"          "3858" 
#    Option     "MaxY"          "272" 
#    Option     "ScreenNumber"  "0" 
#    Option     "ReportingMode" "Scaled" 
#    Option     "ButtonThreshold"       "17" 
#    Option     "ButtonNumber"  "1" 
#    Option     "SendCoreEvents" 
# EndSection 

# ********************************************************************** 
# Monitor section 
# ********************************************************************** 

# Any number of monitor sections may be present 

Section "Monitor" 

    Identifier  "NEC" 

# HorizSync is in kHz unless units are specified. 
# HorizSync may be a comma separated list of discrete values, or a 
# comma separated list of ranges of values. 
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S 
# USER MANUAL FOR THE CORRECT NUMBERS. 

    HorizSync   31.5 - 64.3 

#    HorizSync   30-64         # multisync 
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies 
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies 

# VertRefresh is in Hz unless units are specified. 
# VertRefresh may be a comma separated list of discrete values, or a 
# comma separated list of ranges of values. 
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S 
# USER MANUAL FOR THE CORRECT NUMBERS. 

    VertRefresh 50-90 

EndSection 

Section "Monitor" 
    Identifier   "Monitor1" 
    HorizSync   31.5 - 64.3 
    VertRefresh 50-90 
EndSection 

Section "Monitor" 
    Identifier   "Monitor2" 
    HorizSync   31.5 - 64.3 
    VertRefresh 50-90 
EndSection 


# ********************************************************************** 
# Graphics device section 
# ********************************************************************** 

# Any number of graphics device sections may be present 

# Standard VGA Device: 

Section "Device" 
    Identifier   "Card1" 
    Driver   "glint" 
    BusID   "PCI:1:9:0" 
    Screen 2 
EndSection 

# The chipset line is optional in most cases.  It can be used to override 
# the driver's chipset detection, and should not normally be specified. 

# The Driver line must be present.  When using run-time loadable driver 
# modules, this line instructs the server to load the specified driver 
# module.  Even when not using loadable driver modules, this line 
# indicates which driver should interpret the information in this section. 
    
# The BusID line is used to specify which of possibly multiple devices 
# this section is intended for.  When this line isn't present, a device 
# section can only match up with the primary video device.  For PCI 
# devices a line like the following could be used.  This line should not 
# normally be included unless there is more than one video device 
# intalled. 


# Device configured by xorgconfig: 

Section "Device" 
    Identifier  "nvidia0" 
    Driver      "nvidia" 
    BusID   "PCI:2:0:0" 
    Screen 0 
EndSection 

Section "Device" 
    Identifier   "nvidia1" 
    Driver    "nvidia" 
    BusID   "PCI:2:0:0" 
    Screen 1 
EndSection 

# ********************************************************************** 
# Screen sections 
# ********************************************************************** 

# Any number of screen sections may be present.  Each describes 
# the configuration of a single screen.  A single specific screen section 
# may be specified from the X server command line with the "-screen" 
# option. 
Section "Screen" 
    Identifier  "Screen 0" 
    Device      "nvidia0" 
    Monitor     "NEC" 
    DefaultDepth 24 

    Subsection "Display" 
        Depth       8 
        Modes       "1280x1024" "1024x768" "800x600" "640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       16 
        Modes       "1280x1024" "1024x768" "800x600" "640x480" 
        ViewPort    0 0 
    EndSubsection 
    Subsection "Display" 
        Depth       24 
        Modes       "1280x1024" "1024x768" "800x600" "640x480" 
        ViewPort    0 0 
    EndSubsection 
EndSection 

Section "Screen" 
    Identifier  "Screen 1" 
    Device      "nvidia1" 
    Monitor     "monitor1" 
    DefaultDepth 24 
    SubSection "Display" 
   Depth   24 
   Modes   "1024x768" "800x600" "640x480" 
    EndSubSection 
EndSection 

Section "Screen" 
   Identifier   "Screen 2" 
   Device       "Card1" 
   Monitor   "Monitor2" 
   DefaultDepth 24 
   SubSection "Display" 
   Viewport 0 0 
   Depth 24 
   Modes "1024x768" 
   Virtual 1024 768 
   EndSubSection 
EndSection 

# ********************************************************************** 
# ServerLayout sections. 
# ********************************************************************** 

# Any number of ServerLayout sections may be present.  Each describes 
# the way multiple screens are organised.  A specific ServerLayout 
# section may be specified from the X server command line with the 
# "-layout" option.  In the absence of this, the first section is used. 
# When now ServerLayout section is present, the first Screen section 
# is used alone. 

Section "ServerLayout" 

# The Identifier line must be present 
    Identifier  "Simple Layout" 

# Each Screen line specifies a Screen section name, and optionally 
# the relative position of other screens.  The four names after 
# primary screen name are the screens to the top, bottom, left and right 
# of the primary screen.  In this example, screen 2 is located to the 
# right of screen 1. 

    Screen "Screen 0" 0 0 
    Screen "Screen 1" RightOf "Screen 0" 
    Screen "Screen 2" RightOf "Screen 0" 

# Each InputDevice line specifies an InputDevice section name and 
# optionally some options to specify the way the device is to be 
# used.  Those options include "CorePointer", "CoreKeyboard" and 
# "SendCoreEvents". 

    InputDevice "Mouse1" "CorePointer" 
    InputDevice "Keyboard1" "CoreKeyboard" 

EndSection 

# Section "DRI" 
#    Mode 0666 
# EndSection

-----------

Also... Xinerama did not work. It just made the two monitors that are working 1 big screen. My guess is driver issues or some kind of BusID issue. If you need any more info, feel free to PM me or IM me, or just post here, I'll be checking back frequently. Thank you.

-Aaragath

Last edited by Aaragatn; 01-12-2005 at 03:53 PM.
 
Old 01-07-2005, 02:07 AM   #2
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Here is the 1st half of the log file:

------------------------

X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.5-gentoo-r1 i686 [ELF]
Current Operating System: Linux icewolf 2.6.5-gentoo-r1 #1 Tue Jan 4 01:03:54 Local time zone must be set--see zic manua i686
Build Date: 03 January 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 5 02:07:21 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "NEC"
(**) | |-->Device "nvidia0"
(**) |-->Screen "Screen 1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "nvidia1"
(**) |-->Screen "Screen 2" (2)
(**) | |-->Monitor "Monitor2"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ea card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 01:07:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 01:07:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 01:09:0: chip 3d3d,0009 card 3d3d,0100 rev 01 class 00,01,00 hdr 00
(II) PCI: 02:00:0: chip 10de,0312 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe8ffffff (0x3000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(--) PCI: (1:9:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0xe8000000/17, 0xe7800000/23, 0xe7000000/23
(--) PCI:*(2:0:0) nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xe4000000/24, 0xd0000000/28
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[B]
[1] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[B]
[2] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[B]
[3] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[B]
[4] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[B]
[5] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[10] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
[1] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[B](B)
[2] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[B]
[1] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[B]
[2] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[B]
[3] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[B]
[4] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[B]
[5] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[10] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
[1] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[B](B)
[2] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[B]
[6] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[ B]
[7] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[ B]
[8] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[ B]
[9] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[ B]
[10] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[ B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[ B]O
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B](B)
[13] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B](B)
[14] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[ B](B)
[15] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[ B](B)
[16] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[ B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[ B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[ B]
[19] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[ B]
[20] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[ B]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[ B]
[22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[ B]
[23] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[ B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Video Driver
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is: PCI 02:00:0
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[ B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[ B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[ B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[ B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[ B]
[5] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[ B]
[6] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[ B]
[7] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[ B]
[8] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[ B]
[9] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[ B]
[10] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[ B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[ B]O
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B](B)
[13] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B](B)
[14] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[ B](B)
[15] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[ B](B)
[16] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[ B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[ B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[ B]
[19] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[ B]
[20] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[ B]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[ B]
[22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[ B]
[23] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[ B]
(WW) GLINT: No matching Device section for instance (BusID PCI:1:9:0) found
(--) Chipset pm2v found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[ B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[ B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[ B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[ B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[ B]
[5] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[ B]
[6] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[ B]
[7] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[ B]
[8] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[ B]
[9] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[ B]
[10] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[ B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B](B)
[13] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B](B)
[14] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[ B](B)
[15] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[ B](B)
[16] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[ B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[ B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[ B]
[19] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[ B]
[20] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[ B]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[ B]
[22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[ B]
[23] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[ B]
(EE) Screen 2 deleted because of no matching config section.
(II) UnloadModule: "glint"
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[ B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[ B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[ B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[ B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[ B]
[5] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[ B]
[6] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[ B]
[7] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[ B]
[8] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[ B]
[9] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[ B]
[10] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[ B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[ B]O
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B](B)
[13] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B](B)
[14] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[ B](B)
[15] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[ B](B)
[16] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[ B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[ B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[ B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[ B]
[20] 1 0 0x000a0000 - 0x000affff (0x10000) MS[ B]
[21] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[ B]
[22] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[ B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[ B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[ B]
[25] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[ B]
[26] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[ B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[ B]
[28] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[ B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[ B]
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[ B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[ B]
[32] 1 0 0x000003b0 - 0x000003bb (0xc) IS[ B]
[33] 1 0 0x000003c0 - 0x000003df (0x20) IS[ B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
 
Old 01-07-2005, 02:07 AM   #3
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
2nd half of the log file:

-----------

(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD0000000
(--) NVIDIA(0): MMIO registers at 0xE4000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5600
(--) NVIDIA(0): VideoBIOS: 04.31.20.38.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): VideoRAM: 262144 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, CRT-1
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0): using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NVIDIA(0): NEC: Using hsync range of 31.50-64.30 kHz
(II) NVIDIA(0): NEC: Using vrefresh range of 50.00-90.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "1280x1024" (width 1280 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "1280x960" (width 1280 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "1152x768" (width 1152 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x480" (height 960 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (300, 230) mm
(--) NVIDIA(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(1): Linear framebuffer at 0xD0000000
(--) NVIDIA(1): MMIO registers at 0xE4000000
(II) NVIDIA(1): NVIDIA GPU detected as: GeForce FX 5600
(--) NVIDIA(1): VideoBIOS: 04.31.20.38.00
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): VideoRAM: 262144 kBytes
(II) NVIDIA(1): Connected display device(s): CRT-0, CRT-1
(--) NVIDIA(1): Display device CRT-1: maximum pixel clock at 8 bpp: 400 MHz
(--) NVIDIA(1): Display device CRT-1: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(1): Display device CRT-1: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(WW) NVIDIA(1): The user specified VertRefresh "50.000-90.000" has been
(WW) NVIDIA(1): adjusted to "55.000-90.000" (the intersection with
(WW) NVIDIA(1): EDID-specified VertRefresh "55.000-120.000"
(II) NVIDIA(1): Monitor1: Using hsync range of 31.50-64.30 kHz
(II) NVIDIA(1): Monitor1: Using vrefresh range of 55.00-90.00 Hz
(II) NVIDIA(1): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(1): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(1): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(1): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(1): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(1): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(1): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(1): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(1): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(1): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(1): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(1): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(1): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(1): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(1): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(1): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(1): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(1): Not using default mode "960x720" (hsync out of range)
(WW) (1400x1050,Monitor1) mode clock 122MHz exceeds DDC maximum 110MHz
(II) NVIDIA(1): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(1): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(1): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(1): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(1): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(1): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(1): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(1): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(1): Not using default mode "1280x960" (width too large for virtual size)
(II) NVIDIA(1): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(1): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(1): EDID-specified maximum 1024)
(WW) NVIDIA(1): Not using mode "576x384":
(WW) NVIDIA(1): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(1): Not using mode "360x200":
(WW) NVIDIA(1): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(1): Validated modes for display device CRT-1:
(**) NVIDIA(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(1): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(1): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(1): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(1): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(1): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(1): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(1): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(1): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(1): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(1): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(1): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(1): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(1): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(1): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(1): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(1): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(1): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(1): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(1): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(1): Display dimensions: (330, 240) mm
(--) NVIDIA(1): DPI set to (78, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B]
[1] 0 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B]
[2] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B]
[3] 0 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B]
[4] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[ B](B)
[5] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[ B]E(B)
[6] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[ B]
[7] -1 0 0x000c0000 - 0x000effff (0x30000) MX[ B]
[8] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[ B]
[9] -1 0 0xe8020000 - 0xe8023fff (0x4000) MX[ B]
[10] -1 0 0xe8024000 - 0xe80247ff (0x800) MX[ B]
[11] -1 0 0xe9000000 - 0xe9000fff (0x1000) MX[ B]
[12] -1 0 0xe9003000 - 0xe90030ff (0x100) MX[ B]
[13] -1 0 0xe9002000 - 0xe9002fff (0x1000) MX[ B]
[14] -1 0 0xe9001000 - 0xe9001fff (0x1000) MX[ B]
[15] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[ B]O
[16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[ B](B)
[17] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[ B](B)
[18] -1 0 0xe7000000 - 0xe77fffff (0x800000) MX[ B](B)
[19] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[ B](B)
[20] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[ B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[ B](OprD)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[ B](OprD)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[ B](OprD)
[24] 1 0 0x000a0000 - 0x000affff (0x10000) MS[ B]
[25] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[ B]
[26] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[ B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[ B]
[28] -1 0 0x00000000 - 0x000000ff (0x100) IX[ B]
[29] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[ B]
[30] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[ B]
[31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[ B]
[32] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[ B]
[33] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[ B]
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[ B](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[ B](OprU)
[36] 1 0 0x000003b0 - 0x000003bb (0xc) IS[ B]
[37] 1 0 0x000003c0 - 0x000003df (0x20) IS[ B]
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Setting mode "1024x768"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) RandR enabled
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
Symbol fbdevHWAdjustFrame from module /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved!
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "microsoftpro"
(**) Keyboard1: XkbModel: "microsoftpro"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
 
Old 01-07-2005, 02:33 AM   #4
kierl
Member
 
Registered: Oct 2002
Location: Utah
Distribution: Gentoo(2.6.23-r3)
Posts: 181

Rep: Reputation: 30
Post your entire auto configured Xorg.conf.

Also, do you have xinerama enabled. I didn't see it in your server options so you prolly need to either use
Quote:
startx -- +xinerama
or add
Quote:
+xinerama
to the end of the last line in '/etc/X11/xdm/Xservers' or wherever Xservers resides on your machine.
Mine reads
Quote:
0: local /usr/X11R6/bin/X +xinerama
The nVidia card has hardware support for multiple screens, so it doesn't need Xinerama, but the other card doesn't and the nVidia hardware support only covers nVidia cards so... you need Xinerama, which the auto configure would have enabled.
 
Old 01-07-2005, 07:56 AM   #5
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
just adding -- +xinerama at the end of startx didn't work, just made the two screens I had become one. Here is the autoconfig'd file.

Code:
ection "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/CID/"
	FontPath     "/usr/share/fonts/75dpi/"
	FontPath     "/usr/share/fonts/100dpi/"
EndSection

Section "Module"
	Load  "glx"
	Load  "record"
	Load  "extmod"
	Load  "dbe"
	Load  "dri"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "DigitalVibrance"    	# <i>
        #Option     "NoFlip"             	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "NoLogo"             	# [<bool>]
        #Option     "UBB"                	# [<bool>]
        #Option     "Stereo"             	# <i>
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "NvAGP"              	# <i>
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ConnectedMonitor"   	# <str>
        #Option     "ConnectedMonitors"  	# <str>
        #Option     "TVStandard"         	# <str>
        #Option     "TVOutFormat"        	# <str>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "CursorShadow"       	# [<bool>]
        #Option     "CursorShadowAlpha"  	# <i>
        #Option     "CursorShadowXOffset" 	# <i>
        #Option     "CursorShadowYOffset" 	# <i>
        #Option     "UseEdidFreqs"       	# [<bool>]
        #Option     "FlatPanelProperties" 	# <str>
        #Option     "TwinView"           	# [<bool>]
        #Option     "TwinViewOrientation" 	# <str>
        #Option     "SecondMonitorHorizSync" 	# <str>
        #Option     "SecondMonitorVertRefresh" 	# <str>
        #Option     "MetaModes"          	# <str>
        #Option     "UseInt10Module"     	# [<bool>]
        #Option     "NoTwinViewXineramaInfo" 	# [<bool>]
        #Option     "NoRenderExtension"  	# [<bool>]
        #Option     "Overlay"            	# [<bool>]
        #Option     "CIOverlay"          	# [<bool>]
        #Option     "ForceEmulatedOverlay" 	# [<bool>]
        #Option     "TransparentIndex"   	# <i>
        #Option     "OverlayDefaultVisual" 	# [<bool>]
        #Option     "NvEmulate"          	# <i>
        #Option     "NoBandWidthTest"    	# [<bool>]
        #Option     "CustomEDID-CRT-0"   	# <str>
        #Option     "CustomEDID-CRT-1"   	# <str>
        #Option     "CustomEDID-DFP-0"   	# <str>
        #Option     "CustomEDID-DFP-1"   	# <str>
        #Option     "CustomEDID-TV-0"    	# <str>
        #Option     "CustomEDID-TV-1"    	# <str>
        #Option     "TVOverScan"         	# <f>
        #Option     "IgnoreDisplayDevices" 	# <str>
        #Option     "MultisampleCompatibility" 	# [<bool>]
        #Option     "RegistryDwords"     	# <str>
        #Option     "RegistryBinary"     	# <str>
        #Option     "NoPowerConnectorCheck" 	# [<bool>]
        #Option     "AllowDFPStereo"     	# [<bool>]
        #Option     "XvMCUsesTextures"   	# [<bool>]
        #Option     "HorizSync"          	# <str>
        #Option     "VertRefresh"        	# <str>
        #Option     "AllowGLXWithComposite" 	# [<bool>]
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV31 [GeForce FX 5600]"
	BusID       "PCI:2:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "RGBbits"            	# <i>
        #Option     "NoAccel"            	# [<bool>]
        #Option     "BlockWrite"         	# [<bool>]
        #Option     "FireGL3000"         	# [<bool>]
        #Option     "Overlay"            	# [<str>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "UseFlatPanel"       	# [<bool>]
        #Option     "VideoKey"           	# [<bool>]
	Identifier  "Card1"
	Driver      "glint"
	VendorName  "3DLabs"
	BoardName   "Permedia II 2D+3D"
	BusID       "PCI:1:9:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
 
Old 01-08-2005, 04:36 AM   #6
kierl
Member
 
Registered: Oct 2002
Location: Utah
Distribution: Gentoo(2.6.23-r3)
Posts: 181

Rep: Reputation: 30
Ok...
Code:
Screen      1  "Screen1" RightOf "Screen0"
See that '1' in there. Right before "Screen1" That's the Xinerama screen number. Any screens that have the same number are treated as one screen. If you give them each their own number then each one recieves it's own destop. In your old xorg.conf that number wasn't used so Xinerama treated your screens as one.

Anyhow, here's a config that should work... I hope...
Code:
#ServerLayout
#Note that each screen has a number imediately before the screen name.
# This number tells Xinerama which screens to assign to which desktop.
# If you want to combine two monitors into one desktop then I would recommend
# reading nVidia's tutorial on TwinView. TwinView gives you hardware screen meshing
# essentially, if you use TwinView then X will see one double-wide screen where your
# GeForce is.
Section "ServerLayout"
    Identifier   "Horizontal 3 Screen Layout"
    Screen       0 "Screen0" 0 0
    Screen       1 "Screen1" RightOf "Screen0"
    Screen       2 "Screen2" LeftOf "Screen0"
    #I noticed that in your old layout both screens 1 & 2 were 'RightOf "Screen 0"'
    #This would put them as occupying the same spot
EndSection

#Files
#This is a mesh of your old and the auto configure.
Section "Files"
    RgbPath      "/usr/X11R6/lib/X11/rgb"
    ModulePath   "/usr/X11R6/lib/modules"
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/CID/"
    FontPath     "/usr/share/fonts/75dpi/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/local/"
EndSection

#Modules
#This is a mesh of your old and the auto configure.
#Please note that the auto configure added 'Load "dri"' while nVidia specifically says to not load the dri.
Section "Module"
    Load  "glx"
    Load  "record"
    Load  "extmod"
    Load  "dbe"

    SubSection  "extmod"
        Option    "omit xfree86-dga"
    EndSubSection

    Load  "xtrap"
    Load  "freetype"
    Load  "type1"
EndSection

#Keyboard
#From your config file.
Section "InputDevice"
    Identifier    "Keyboard1"
    Driver        "kbd"
    Option        "AutoRepeat"   "500 30"
    Option        "XkbRules"     "xorg"
    Option        "XkbModel"     "microsoftpro"
    Option        "XkbLayout"    "us"
EndSection

#Mouse
#From your config file.
Section "InputDevice"
    Identifier    "Mouse1"
    Driver        "mouse"
    Option        "Protocol"     "ExplorerPS/2"
    Option        "Device"       "/dev/mouse"
EndSection

#Monitors
#From your config file.
#Your old file identifies the NEC, but your values are all the same... are your monitors the same?
# Or did you just cut and paste this section? If you did, get the right info for your monitors here.
# It could mean the difference between a working screen and a fried monitor.
Section "Monitor"
    Identifier    "Monitor0"
    HorizSync     31.5-64.3
    VertRefresh   50-90
EndSection

Section "Monitor"
    Identifier    "Monitor1"
    HorizSync     31.5 - 64.3
    VertRefresh   50-90
EndSection

Section "Monitor"
    Identifier    "Monitor2"
    HorizSync     31.5 - 64.3
    VertRefresh   50-90
EndSection

#Devices
#From your config file.
#The auto config only had your GeForce listed once.
Section "Device"
    Identifier    "GeForce Head 0"
    Driver        "nvidia"
    VendorName    "nVidia Corporation"
    BoardName     "NV31 [GeForce FX 5600]"
    BusID         "PCI:2:0:0"
EndSection

Section "Device"
    Identifier    "GeForce Head 1"
    Driver        "nvidia"
    VendorName    "nVidia Corporation"
    BoardName     "NV31 [GeForce FX 5600]"
    BusID         "PCI:2:0:0"
EndSection

Section "Device"
    Identifier    "Permedia"
    Driver        "glint"
    VendorName    "3DLabs"
    BoardName     "Permedia II 2D+3D"
    BusID         "PCI:1:9:0"
EndSection

#Screens
#You had some pretty odd stuff in here. Looking at your monitor sections and knowing what I know about
#your cards, your screens should all be able to handle the modes specified. Actually your monitors
#are holding your cards back. That is, if you do have the correct monitor info in here.
Section "Screen"
    Identifier    "Screen0"
    Device        "GeForce Head 0"
    Monitor       "Monitor0"
    DefaultDepth  24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier    "Screen1"
    Device        "GeForce Head 1"
    Monitor       "Monitor1"
    DefaultDepth  24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier    "Screen2"
    Device        "Permedia"
    Monitor       "Monitor2"
    DefaultDepth  24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
Old 01-08-2005, 04:39 AM   #7
kierl
Member
 
Registered: Oct 2002
Location: Utah
Distribution: Gentoo(2.6.23-r3)
Posts: 181

Rep: Reputation: 30
Oh, I almost forgot. Just out of curiosity could you post the output of 'Xorg -scanpci'
 
Old 01-09-2005, 06:17 PM   #8
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
brief up so it's easier for me to find the post while I'm trying out your suggestions. I've been out of town the last 2 days, so we'll see how these work.
 
Old 01-09-2005, 07:35 PM   #9
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Okay, it didn't work. I have your config in there exactly now, and only my left monitor works. By the way, the reason my screens section is weird is for 2 reasons. 1: My left monitor (16inch one connected to my geforce) can't go above 1024x768 for some reason, and my right monitor is 15 inches, so much above 1024x768 it gets almost too small to be readable. So I just choose to keep everything there. Also my biggest 17inch monitor is a tad out of focus, so lower resolutions help me to see text on that screen, lol. I think the monitor section may not be correct, because I can move my mouse over to the other screens, but they are both blank. How do I find the exact HorizSync and VertSync rates of my monitors?
 
Old 01-09-2005, 11:36 PM   #10
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Also... I accidently deleted my old xorg.conf file, is there a program I can use to just copy and paste my old one that I posted here into a file so that I don't have to go through and delete useless lines of code (like in abiword). you can't just copy/past with nano, no that would be too easy *sigh*.
 
Old 01-10-2005, 11:06 AM   #11
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Help?
 
Old 01-10-2005, 10:52 PM   #12
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
bump... I still need help, this vexes me greatly.
 
Old 01-12-2005, 03:52 PM   #13
Aaragatn
LQ Newbie
 
Registered: Jan 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Solved!!! Okay... here's the thing, I used Kierl_andon's config he sent me, but that didn't work. it turns out that under the device section when you put "screen 0" or "screen 1" you should NOT do that on cards that don't have dual heads, that is to tell the video card which output to go from. So I took that out, and it also turned out that I had my refresh rate way to high for my monitor on the right.... so here is the final config file.


Code:
Section "ServerLayout"
    Identifier   "Horizontal 3 Screen Layout"
    Screen       0 "Screen0" 0 0
    Screen        "Screen1" RightOf "Screen0"
    Screen        "Screen2" RightOf "Screen1"
EndSection

Section "Files"
    RgbPath      "/usr/X11R6/lib/X11/rgb"
    ModulePath   "/usr/X11R6/lib/modules"
    FontPath     "/usr/share/fonts/misc/"
    FontPath     "/usr/share/fonts/TTF/"
    FontPath     "/usr/share/fonts/Type1/"
    FontPath     "/usr/share/fonts/CID/"
    FontPath     "/usr/share/fonts/75dpi/"
    FontPath     "/usr/share/fonts/100dpi/"
    FontPath     "/usr/share/fonts/local/"
EndSection


Section "Module"
    Load  "glx"
    Load  "record"
    Load  "extmod"
    Load  "dbe"

    SubSection  "extmod"
        Option    "omit xfree86-dga"
    EndSubSection

    Load  "xtrap"
    Load  "freetype"
    Load  "type1"
EndSection

Section "InputDevice"
    Identifier    "Keyboard1"
    Driver        "kbd"
    Option        "AutoRepeat"   "500 30"
    Option        "XkbRules"     "xorg"
    Option        "XkbModel"     "microsoftpro"
    Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
    Identifier    "Mouse1"
    Driver        "mouse"
    Option        "Protocol"     "ExplorerPS/2"
    Option        "Device"       "/dev/mouse"
EndSection


Section "Monitor"
    Identifier    "Monitor0"
    HorizSync     31.5-64.3
    VertRefresh   50-90
EndSection

Section "Monitor"
    Identifier    "Monitor1"
    HorizSync     31.5 - 64.3
    VertRefresh   50-90
EndSection

Section "Monitor"
    Identifier    "Monitor2"
    HorizSync     31.5 - 64.3
    VertRefresh   50-60
EndSection

Section "Device"
    Identifier    "GeForce Head 0"
    Driver        "nvidia"
    VendorName    "nVidia Corporation"
    BoardName     "NV31 [GeForce FX 5600]"
    BusID         "PCI:2:0:0"
    Screen 0
EndSection

Section "Device"
    Identifier    "GeForce Head 1"
    Driver        "nvidia"
    VendorName    "nVidia Corporation"
    BoardName     "NV31 [GeForce FX 5600]"
    BusID         "PCI:2:0:0"
    Screen 1
EndSection

Section "Device"
    Identifier    "Permedia"
    Driver        "glint"
    VendorName    "3DLabs"
    BoardName     "Permedia II 2D+3D"
    BusID         "PCI:1:9:0"
EndSection
.
Section "Screen"
    Identifier    "Screen0"
    Device        "GeForce Head 0"
    Monitor       "Monitor0"
    DefaultDepth  24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier    "Screen1"
    Device        "GeForce Head 1"
    Monitor       "Monitor1"
    DefaultDepth  24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier    "Screen2"
    Device        "Permedia"
    Monitor       "Monitor2"
    DefaultDepth  24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
Well there ya have it folks... any more questions I would be glad to help you, just IM or e-mail me or something.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
default monitor on nvidia / dual monitor setup fenderog SUSE / openSUSE 3 05-01-2009 05:36 PM
Radeon 9200SE in multimonitor setup AlexiaDeath Slackware 2 10-18-2005 10:39 AM
Radeon 9200SE in multimonitor setup AlexiaDeath Linux - Hardware 0 10-17-2005 09:27 AM
3 Monitor setup, Only 1 Monitor can play videos. kierl Linux - Software 0 01-05-2005 07:45 PM
Booting to wrong Monitor (w/ dual monitor setup) NeoNostalgia Linux - General 1 06-30-2004 01:49 AM


All times are GMT -5. The time now is 12:18 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration