mplayer problem urgent

Tinku · 09-24-2004, 12:46 PM

hi
whenever,i run an .avi file with mplayer,it just doesnt run,,when i try to forward it,i could see the frames,but the continuous motion is absent,.Dat and .mpg files play fine,plz help me out

i have been facing this problem for quite a time now,earlier the same mplayer worked well,plz help me out

tia
tinku

mikedeatworld · 09-24-2004, 12:51 PM

what is your output/errors in the command line?

have you tried updating to the newest version of mplayer?

are you running the command mplayer or gmplayer?

rpmseek.com will have the link to rpm file for mplayer

masand · 09-24-2004, 12:52 PM

hi there

try running ur files with xine (xinehq.de)

with codecs from http://cambuca.ldhs.cetuc.puc-rio.br....52-1.i386.rpm

i haven't tried these codecs for mplayer,,also there are some codecs at mplayers website

try using them

regards

Tinku · 09-24-2004, 01:00 PM

Quote:

Originally posted by mikedeatworld
what is your output/errors in the command line?

have you tried updating to the newest version of mplayer?

are you running the command mplayer or gmplayer?

rpmseek.com will have the link to rpm file for mplayer

i am using the latest version of the mplayer downloaded from the site.i dont get any errors,it just gets stuck up ,it doesnt move forward,,

i am using the command mplayer

Tinku · 09-24-2004, 01:01 PM

Quote:

Originally posted by masand
hi there

try running ur files with xine (xinehq.de)

with codecs from http://cambuca.ldhs.cetuc.puc-rio.br....52-1.i386.rpm

i haven't tried these codecs for mplayer,,also there are some codecs at mplayers website

try using them

regards

i am downloading the rpm right now,i will post the result in the next 10 minutes

cheers
tinku

mikedeatworld · 09-24-2004, 01:01 PM

shot in the dark. do you have dma turned on?

Tinku · 09-24-2004, 01:13 PM

nope,
i installed the rpm u were referring to,but to no advantage,,

any other suggestion,plzzzzzzzzzzz

Tinku · 09-24-2004, 01:13 PM

Quote:

Originally posted by mikedeatworld
shot in the dark. do you have dma turned on?

wat is dma?
how to turn it off?

mikedeatworld · 09-24-2004, 01:27 PM

direct memory access.

you want it on...

have you tried xine or kaffeine?

Tinku · 09-24-2004, 01:31 PM

Quote:

Originally posted by mikedeatworld
direct memory access.

you want it on...

have you tried xine or kaffeine?

yeah ,i tried both of them,for most of the .avi files,xine and kaffeine play them but without sound support and irregular movement of the video frames?wat does xine have to do with dma?

Micro420 · 09-24-2004, 02:09 PM

try getting up-to-date codecs for mplayer.

extract them to /usr/lib/win32 and see what happens?

also, is this happening on ONE .avi file, or all .avi files? Perhaps your video file is corrupt?

Tinku · 09-24-2004, 02:19 PM

Quote:

Originally posted by Micro420
try getting up-to-date codecs for mplayer.

extract them to /usr/lib/win32 and see what happens?

also, is this happening on ONE .avi file, or all .avi files? Perhaps your video file is corrupt?

i got all codecs updated.and this is happening with most of my .avi files,though not all,i made sure they r not corrupt

Tinku · 09-25-2004, 08:08 PM

the following is wat happens when i play an avi file

Code:


MPlayer 1.0pre5-3.3.3 (C) 2000-2004 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP/XP-M Barton 1915 MHz (Family: 6, Steppi
ng: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directo
ry
Reading config file /home/aaa/.mplayer/config
Reading /home/aaa/.mplayer/codecs.conf: Can't open '/home/aaa/.mplayer
/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/c
odecs.conf': No such file or directory
Using built-in default codecs.conf.
font: can't open file: /home/aaa/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Failed to open /dev/rtc: Permission denied (it should be readable by the user.)
Using usleep() timing
Can't open input config file /home/aaa/.mplayer/input.conf: No such file or
 directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or
directory
Falling back on default (hardcoded) input config
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: Permission denied
Failed to open LIRC support.
You will not be able to use your remote control.

Playing RHTDM-cute entry of Diya.avi.
AVI file format detected.
VIDEO:  [DX50]  320x208  24bpp  25.000 fps  550.7 kbps (67.2 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 32000 Hz, 2 ch, 16 bit (0x10), ratio: 8000->128000 (64.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 1152x864 with depth 16 and 16 bpp (":0.0" => local display)
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support and read DOCS/HTML/en/devices.html#xv!
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 32000 hz, little endian signed int
AF_pre: 32000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 32000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 320 x 208 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.54:1 - prescaling to correct movie aspect.
VO: [x11] 320x208 => 320x208 Planar YV12
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
New_Face failed. Maybe the font path is wrong.  1   0%  0%  0.0% 0 0 0%
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.

A:   0.5 V:   0.1 A-V:  0.468 ct:  0.004    3/  3   0%  0%  0.0% 0 0 0%

Tinku · 09-25-2004, 08:28 PM

Quote:

Originally posted by mikedeatworld
shot in the dark. do you have dma turned on?

i tried switching it off,but that didnt work

Tinku · 09-25-2004, 08:55 PM

i dont know swhy,but typing the following command makes the video work ,but not the audio

Code:


mplayer -aid 1232  Gladiator#1.avi



Playing Gladiator#1.avi.
AVI file format detected.
AVI: invalid audio stream ID: 1232 - ignoring (nosound)
AVI_NI: No audio stream found -> no sound.
VIDEO:  [DIV3]  592x256  24bpp  25.000 fps  1127.6 kbps (137.6 kbyte/s)
vo: X11 running at 1152x864 with depth 16 and 16 bpp (":0.0" => local display)
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support and read DOCS/HTML/en/devices.html#xv!
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
Audio: no sound
Starting playback...
VDec: vo config request - 592 x 256 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 592x256 => 592x256 Planar YV12
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
V: 323.6  8091   5%  9%  0.0% 0 0 0%
Exiting... (Quit)

this is working fine with all avi files,but i dont hear any sound

wat else cud be the problem?