Linux Mint 19.1
 

Sometime ago I wrote here that Linux Mint 18.2 was not seeing my cell phone or my microscope that is mostly designed for Windows systems. I hoped that in 19.1 that OS would be better for these simple tasks, I was wrong because nothing has changed.
Don't get me wrong because I love Linux Mint in any version, but one might think that by now they would have figured out how to get these priority appliances like a cell phone or a microscope to work on Linux, but they haven't yet.
So I would hope they can port these simple things to Linux and we can download the patch, that's my suggestion and my request.

Have you tried under wine? Of course, Mint is 64 bit only and does a 64bit wine which isn't good for much as most apps are 32bit. But I do find it hard to fathom that a microscope isn't even picked up as a webcam. What's the interface?

I'd demand a refund if I were you.

Seriously, think about your criticism. This is customer mentality: You provide no actual information about the problem, simply claiming that "It Doesn't Work". I bet you it is possible.

And btw you are absolutely correct: there are things that work on Windows but not on Linux.
There are also many things that work on Linux but not on Windows, not even on macOS.

Have you also considered that it might not be "Linux' fault" that some things don't work? Many hardware providers do not provide opensourced drivers or Linux drivers or even any Linux software for their devices. Yet still some Linux developers reverse engineer drivers for Linux. Of course they are always behind in development, and then someone like you (sadly you're not the only one there) dismisses their efforts with "One would think they would've gotten this to work by now".

[B][B][B][I]I never said i was the only one with Linux problems, I realize that other people may have the same problem and they don't explain what is wrong either, but with your nasty way of explaining it, nobody will ever figure it out.However thanks for your useless advise.

joeinslw,

Maybe if you can give us some concrete terminal information we can be more helpful.

A. Concerning the cell phone:

First, connect the cell phone to the OS, and while it is connected, whether it works or not, give us the following information from:

And:

B. Concerning the microscope:

First, connect the microscope to the OS and while it is connected, whether it works or not, give us the same information.

If we can figure this out than all is well. If we cannot figure it out, at least we tried.

You seem to have this pattern with your posts:
https://www.linuxquestions.org/quest...es-4175654628/
https://www.linuxquestions.org/quest...-a-4175617238/
https://www.linuxquestions.org/quest...ml#post5495299

If you just want to complain about how Mint isn't working for you and demand features, not sure what anyone here can do to help you. This isn't the Mint website and we can't make the Mint developers do anything.

If you want help, then read the "Question Guidelines" and provide details, like greencedar asked. Just saying "cell phone" and "microscope" tells us nothing. But insulting folks won't get you much.

OK thanks, I will but to let you know I sent that microscope back to the people that sold it as a working Linux device, it didn't no matter what I did, so I returned it.
I recently bought another one because I'm not giving up, by the way I don't think it's Linux, it's the folks that make these devices and boast that they work on Linux or android, and they don't.
When I get the new one I'll be sure to let you know if it works or not, and if it doesn't I will contact you to see if we can figure it out.
This new one also says it will work in Linux or Android, we will see.

Thanks again
joeinslw

Oh, I see. A repeat offender.
At the very least the first one is pretty much the same as this one and I already answered there.
Interesting how op seems to think that we're the ones actually making Linux ("Please get your engineers to build the files that are missing" etc.) - no, we're just regular users like you!

My last comment was not nasty - the customer mentality mentioned was not meant as an insult, it's an important issue because it essentially means that somebody does not understand what FOSS is about.
Please see this document, esp. the section "Subproblem #3a: There is a culture".

And unless you tell us brand/model of whatever it is, be it phone, microscope, etc., there's going to be ABSOLUTELY NOTHING we can tell you. Saying "microscope" and "microscope software" is meaningless. You've not said what you did/tried to get this mystery device to work, so we can't even BEGIN to guess.

I have had Linux mint 19.1 Xfce (64-bit) and now upgraded to Linux mint 19.2 Xfce which both see my phone when it's connected through the USB. I am not aware that this is the case of other versions of Linux mint with different desk top environments. It has been my experience that USB cables can go bad even though they look good and cause connection issues. Which desk top environment you have?

joeinslw, why don't you try and verify the system is "seeing" your phone and/or microscope? I can think of at least a couple of ways to do that; there's the kernel log, there's also the lspci and lsusb commands that can give you more information.

So the first step is to check if the system is even seeing the hardware you wish to get working with Linux - not much point trying to configure application software for it/them, if the system isn't even seeing them to begin with. If the hardware in question is connected via USB, then the kernel log and the lsusb command should shed some light on whether or not the system is seeing the hardware in question. The next step is to verify if any drivers for the hardware concerned need to be loaded (usually that's the case), then to check if the correct drivers are in fact being loaded. Provided that's also true, then it's a matter of configuring the relevant application software to use said hardware. These basic troubleshooting steps apply to pretty much, if not, any Linux distribution. In many cases, the steps you take to verify the above, and troubleshoot a problem with Linux are almost identical.

I can understand if something just isn't making sense to you, some things just aren't obvious or easy to understand when something is new to you - I get that, honestly do. I can understand the frustration with manufacturers that won't provide drivers for Linux, and/or the relevant info for Linux developers to support a piece of hardware. But this isn't Linux's fault, anymore than it's the fault of Linux Mint's developers either. Anymore than it's the fault of the Linux kernel developers. But just sitting there complaining about it solves nothing, and isn't going to make anyone provide support for said hardware (if it isn't supported already) - particularly if you haven't even bothered to do some basic troubleshooting.

You've got to understand that because more desktops run Windows than any other system (including Linux based systems), hardware manufacturers/vendors support Windows ahead of any other system. How's that the fault of Linux Mint's developers? I think if you had any idea (which you don't seem to) of how difficult it can be write software, without the required info, particularly and especially drivers, then you might think differently. I'm glad there is a free/open-source system I can use and make my own, without MS's BS to contend with.

I'd suggest you either do some basic troubleshooting, then provide proper info to us, or maybe just use Windows and be done with it, and if you still have a problem, then contact the hardware vendor and get them to sort it out for you.

Thank you, I am using Linux Mint 19.1 and it sounds like if I upgrade to 19.2 my phone and other connection problems should disappear, am I correct?

Again, we have NO IDEA, since you still tell us absolutely nothing about your phone, microscope, how they're connected to your system, and what kind of 'connection problem' you're having.

Plugging in a phone to get pictures off is far different than being able to sync an iPhone for music, versus using the phone's bluetooth to sync a phone book. All are 'connections'...all are different. You again provide no details, so we can't tell you.

OK I get it, the phone is an UmiDigi an off brand probably made in china but it should work in Linux Mint. They claim it will work in Windows 7, 8, 10, XP, and Vista, it has an android OS so I don't understand, when I plug it in to a USB port it isn't recognized by the system, nothing happens, and when I look for it it's no-where to be found. I get no pictures, no music, no files of any kind, very frustrating.
However I did manage to get a new Digital Microscope, I just got it and it's called Jiusion it works in a Linux program called Cheese which doesn't have many options to use like brightness, camera, or any other buttons in that program. I think it might work in Media Player, but I didn't have the time yesterday, I had an appointment, so I need to try more, but the phone is impossible for me to deal with, it's very stubborn.

Ok...so an off-brand phone, running what version of Android? And what MODEL phone?? Where are you going to 'look for it', and what are you expecting it to actually do?? As root, run 'dmesg -c', then plug your phone in, wait a second, and run it again, and capture it to a file. That is relevant diagnostic information, as well as lsusb...as you've been asked to several times.

Again: without ANY sort of diagnostic information, log files, or even a model number for the phone, NO ONE can tell you anything. You still don't even say what you're wanting to do with the phone after you get it hooked up. Are you trying to copy files to/from? Sync contacts? What???
...and since it shows up in Cheese, you can run any one of a number of programs, such as VLC, that will let you play with the various settings. It is just a plain video device.

OK, let's start getting at this logically & technically.
For starters, please do this for each device.

edit:
also have a good look at this.

ondoho, Thank you...... I put sudo dseg in my terminal window, it asked for my password, I entered it and what came up is a lot of information. I would not feel comfortable sending on this public line, however I did see at the end of this message some items were, or are blocked, and I'm not savvy enough to figure out what they mean, but thank you again for taking the time, maybe I can figure it out in time.

I doubt messages from dmesg are going to identify either yourself, your machine, or your location to the rest of the Internet. You can simply obfuscate anything like IP addresses for example. Private IP addresses won't identify you personally or your location anyway. But either way, the least you could do is provide the info requested since members have taken the time to try and help you. Nobody can help you without you providing the required info. So you may wish to re-think that if you want help in the future.

TO ondoho, Please accept my appology I didn't mean to ignore your attempt to help me instead I appreciate it. I changed my mind about sending the results from my Terminal below are the contents of that search.
I must go to a Doctor soon so I will be off line for a few hours, I will check when I return....Thank You again....
When I tried to send the message was text to long so I have to send in two messages.
---------------------------------------------------------------------------------------------------------------------------------------------

0.085296] e820: reserve RAM buffer [mem 0xda6bb000-0xdbffffff]
[ 0.085297] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 0.085357] NetLabel: Initializing
[ 0.085359] NetLabel: domain hash size = 128
[ 0.085360] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.085371] NetLabel: unlabeled traffic allowed by default
[ 0.085381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.085381] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.089015] clocksource: Switched to clocksource hpet
[ 0.095651] VFS: Disk quotas dquot_6.6.0
[ 0.095665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.095740] AppArmor: AppArmor Filesystem Enabled
[ 0.095761] pnp: PnP ACPI init
[ 0.096011] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.096014] system 00:00: [io 0xffff] has been reserved
[ 0.096016] system 00:00: [io 0xffff] has been reserved
[ 0.096018] system 00:00: [io 0xffff] has been reserved
[ 0.096020] system 00:00: [io 0x1c00-0x1cfe] has been reserved
[ 0.096022] system 00:00: [io 0x1d00-0x1dfe] has been reserved
[ 0.096024] system 00:00: [io 0x1e00-0x1efe] has been reserved
[ 0.096027] system 00:00: [io 0x1f00-0x1ffe] has been reserved
[ 0.096029] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.096031] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.096036] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096055] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.096094] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.096098] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.096229] system 00:03: [io 0x0a00-0x0a2f] has been reserved
[ 0.096231] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.096233] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.096237] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096287] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.096291] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096457] pnp 00:05: [dma 0 disabled]
[ 0.096489] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.096752] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.097140] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.097143] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.097145] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.097147] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.097150] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.097152] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.097154] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.097156] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.097159] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.097161] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.097163] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.097165] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.097169] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.097454] pnp: PnP ACPI: found 8 devices
[ 0.103177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.103210] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.103221] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.103225] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
[ 0.103248] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.103251] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.103262] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.103263] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.103264] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.103265] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.103266] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.103266] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.103268] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.103268] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.103269] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff window]
[ 0.103271] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.103272] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.103273] pci_bus 0000:03: resource 4 [io 0xe000-0xefff]
[ 0.103362] NET: Registered protocol family 2
[ 0.103497] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.103573] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.103684] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.103706] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.103726] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.103764] NET: Registered protocol family 1
[ 0.103775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.152097] PCI: CLS 64 bytes, default 64
[ 0.152123] Unpacking initramfs...
[ 0.756532] Freeing initrd memory: 59120K
[ 0.756538] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.756541] software IO TLB [mem 0xc4b4a000-0xc8b4a000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.756707] Scanning for low memory corruption every 60 seconds
[ 0.757147] Initialise system trusted keyrings
[ 0.757156] Key type blacklist registered
[ 0.757181] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.757906] zbud: loaded
[ 0.758247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.758336] fuse init (API version 7.26)
[ 0.759553] Key type asymmetric registered
[ 0.759555] Asymmetric key parser 'x509' registered
[ 0.759584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.759613] io scheduler noop registered
[ 0.759614] io scheduler deadline registered
[ 0.759633] io scheduler cfq registered (default)
[ 0.759992] efifb: probing for efifb
[ 0.760014] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
[ 0.760016] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.760018] efifb: scrolling: redraw
[ 0.760020] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.762833] Console: switching to colour frame buffer device 240x67
[ 0.765564] fb0: EFI VGA frame buffer device
[ 0.765581] intel_idle: MWAIT substates: 0x42120
[ 0.765582] intel_idle: v0.4.1 model 0x3C
[ 0.765686] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.765768] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.765810] ACPI: Power Button [PWRB]
[ 0.765845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.765878] ACPI: Power Button [PWRF]
[ 0.766452] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.766613] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.766628] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.766859] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.766875] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.766944] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.766964] pstore: using zlib compression
[ 0.766976] pstore: Registered erst as persistent store backend
[ 0.767052] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.767177] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.788239] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.810038] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.810320] Linux agpgart interface v0.103
[ 0.815744] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.864216] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[ 0.864238] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 0.875952] loop: module loaded
[ 0.876098] libphy: Fixed MDIO Bus: probed
[ 0.876110] tun: Universal TUN/TAP device driver, 1.6
[ 0.876147] PPP generic driver version 2.4.2
[ 0.876190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.876209] ehci-pci: EHCI PCI platform driver
[ 0.876335] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.876352] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.876378] ehci-pci 0000:00:1a.0: debug port 2
[ 0.880293] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.880301] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7c34000
[ 0.896016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.896054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.896072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.896091] usb usb1: Product: EHCI Host Controller
[ 0.896105] usb usb1: Manufacturer: Linux 4.15.0-55-generic ehci_hcd
[ 0.896122] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.896223] hub 1-0:1.0: USB hub found
[ 0.896237] hub 1-0:1.0: 3 ports detected
[ 0.896426] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.896443] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.896471] ehci-pci 0000:00:1d.0: debug port 2
[ 0.901104] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.901110] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c33000
[ 0.916016] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.916765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.917444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918084] usb usb2: Product: EHCI Host Controller
[ 0.918721] usb usb2: Manufacturer: Linux 4.15.0-55-generic ehci_hcd
[ 0.919359] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.920096] hub 2-0:1.0: USB hub found
[ 0.920732] hub 2-0:1.0: 3 ports detected
[ 0.921451] ehci-platform: EHCI generic platform driver
[ 0.922085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.922716] ohci-pci: OHCI PCI platform driver
[ 0.923348] ohci-platform: OHCI generic platform driver
[ 0.923982] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.924696] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.925325] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.927023] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.927671] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.927768] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.928422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.929072] usb usb3: Product: xHCI Host Controller
[ 0.929717] usb usb3: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.930364] usb usb3: SerialNumber: 0000:00:14.0
[ 0.931082] hub 3-0:1.0: USB hub found
[ 0.931741] hub 3-0:1.0: 15 ports detected
[ 0.934769] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.935410] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.936052] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.936706] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.937335] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.937960] usb usb4: Product: xHCI Host Controller
[ 0.938570] usb usb4: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.939170] usb usb4: SerialNumber: 0000:00:14.0
[ 0.939839] hub 4-0:1.0: USB hub found
[ 0.940448] hub 4-0:1.0: 6 ports detected
[ 0.941610] i8042: PNP: No PS/2 controller found.
[ 0.942271] mousedev: PS/2 mouse device common for all mice
[ 0.943007] rtc_cmos 00:01: RTC can wake from S4
[ 0.943707] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.944317] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.944902] i2c /dev entries driver
[ 0.945507] device-mapper: uevent: version 1.0.3
[ 0.946143] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.946738] intel_pstate: Intel P-state driver initializing
[ 0.947569] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.948150] EFI Variables Facility v0.08 2004-May-17
[ 0.956101] NET: Registered protocol family 10
[ 0.959790] Segment Routing with IPv6
[ 0.960460] NET: Registered protocol family 17
[ 0.961166] Key type dns_resolver registered
[ 0.962034] RAS: Correctable Errors collector initialized.
[ 0.962632] microcode: sig=0x306c3, pf=0x2, revision=0x27
[ 0.963386] microcode: Microcode Update Driver: v2.2.
[ 0.963405] sched_clock: Marking stable (963383175, 0)->(942982801, 20400374)
[ 0.964822] registered taskstats version 1
[ 0.965435] Loading compiled-in X.509 certificates
[ 0.967844] Loaded X.509 cert 'Build time autogenerated kernel key: 2ed9c0a78927f1fed24db33f01fd983502d97350'
[ 0.968658] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 0.969289] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 0.971464] Loaded UEFI:db cert 'Trust - Lenovo Certificate: ddfada488c169b80473d73f8a38a5d58' linked to secondary sys keyring
[ 0.972272] Couldn't get size: 0x800000000000000e
[ 0.972966] MODSIGN: Couldn't get UEFI MokListRT
[ 0.973663] zswap: loaded using pool lzo/zbud
[ 0.977086] Key type big_key registered
[ 0.977738] Key type trusted registered
[ 0.979721] Key type encrypted registered
[ 0.980428] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.991868] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[ 0.992602] ima: No TPM chip found, activating TPM-bypass! (rc=6)
[ 0.993315] ima: Allocated hash algorithm: sha1
[ 0.993958] evm: HMAC attrs: 0x1
[ 0.994873] Magic number: 15:15:182
[ 0.995537] acpi device:41: hash matches
[ 0.996271] rtc_cmos 00:01: setting system clock to 2019-08-12 14:10:14 UTC (1565619014)
[ 0.997048] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.997699] EDD information not available.
[ 1.236029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.260029] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.265754] Freeing unused kernel image memory: 2408K
[ 1.272062] usb 3-9: new low-speed USB device number 2 using xhci_hcd
[ 1.292084] Write protecting the kernel read-only data: 20480k
[ 1.293758] Freeing unused kernel image memory: 2008K
[ 1.294642] Freeing unused kernel image memory: 1868K
[ 1.300461] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.301114] x86/mm: Checking user space page tables
[ 1.306690] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.368671] ahci 0000:00:1f.2: version 3.0
[ 1.368835] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[ 1.369517] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.384225] pps_core: LinuxPPS API ver. 1 registered
[ 1.385125] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.386825] PTP clock support registered
[ 1.390307] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.391006] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.392396] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.393074] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.394038] hub 1-1:1.0: USB hub found
[ 1.394751] hub 1-1:1.0: 6 ports detected
[ 1.420367] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.421113] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.422071] hub 2-1:1.0: USB hub found
[ 1.422113] scsi host0: ahci
[ 1.422307] scsi host1: ahci
[ 1.422414] scsi host2: ahci
[ 1.424040] scsi host3: ahci
[ 1.424352] scsi host4: ahci
[ 1.424395] ata1: SATA max UDMA/133 abar m2048@0xf7c32000 port 0xf7c32100 irq 25
[ 1.424396] ata2: SATA max UDMA/133 abar m2048@0xf7c32000 port 0xf7c32180 irq 25
[ 1.424397] ata3: SATA max UDMA/133 abar m2048@0xf7c32000 port 0xf7c32200 irq 25
[ 1.424399] ata4: SATA max UDMA/133 abar m2048@0xf7c32000 port 0xf7c32280 irq 25
[ 1.424401] ata5: SATA max UDMA/133 abar m2048@0xf7c32000 port 0xf7c32300 irq 25
[ 1.428184] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.429393] usb 3-9: New USB device found, idVendor=046d, idProduct=c512
[ 1.429394] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.429395] usb 3-9: Product: USB Receiver
[ 1.429396] usb 3-9: Manufacturer: Logitech
[ 1.432988] hub 2-1:1.0: 8 ports detected
[ 1.503572] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.556063] usb 3-10: new high-speed USB device number 3 using xhci_hcd
[ 1.569441] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:0b:84:0b:9a:2a
[ 1.570092] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.570779] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.571798] [drm] Memory usable by graphics device = 2048M
[ 1.572162] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.573055] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 1.573056] fb: switching to inteldrmfb from EFI VGA
[ 1.573642] Console: switching to colour dummy device 80x25
[ 1.573711] [drm] Replacing VGA console driver
[ 1.579900] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.579904] [drm] Driver supports precise vblank timestamp query.
[ 1.581989] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.585047] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.586021] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.586241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.633690] fbcon: inteldrmfb (fb0) is primary device
[ 1.713027] Console: switching to colour frame buffer device 240x67
[ 1.724373] usb 3-10: New USB device found, idVendor=03f0, idProduct=4117
[ 1.724374] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.724376] usb 3-10: Product: HP LaserJet 1018
[ 1.724377] usb 3-10: Manufacturer: Hewlett-Packard
[ 1.724377] usb 3-10: SerialNumber: KP32BFV
[ 1.727560] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.732483] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.736163] usbcore: registered new interface driver usbhid
[ 1.736181] usbhid: USB HID core driver
[ 1.738556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:046D:C512.0001/input/input3
[ 1.739257] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.739287] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.740607] ata1.00: ATA-8: Hitachi HDS723020ALA640, MK7OAAU0, max UDMA/133
[ 1.740629] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.742053] ata1.00: configured for UDMA/133
[ 1.742274] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72302 AAU0 PQ: 0 ANSI: 5
[ 1.742558] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.742690] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.742758] sd 0:0:0:0: [sda] Write Protect is off
[ 1.742774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.742865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.743299] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.743335] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.743368] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.744599] ata3.00: ATA-8: Hitachi HDS723020ALA640, MK7OAAU0, max UDMA/133
[ 1.744621] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.744661] ata2.00: ATA-8: Hitachi HDS723020ALA640, MK7OAAU0, max UDMA/133
[ 1.744684] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.745948] ata3.00: configured for UDMA/133
[ 1.746011] ata2.00: configured for UDMA/133
[ 1.746143] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72302 AAU0 PQ: 0 ANSI: 5
[ 1.746370] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.746408] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.746452] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.746468] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.746505] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.746509] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72302 AAU0 PQ: 0 ANSI: 5
[ 1.746643] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.746651] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.746657] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.746658] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.746671] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.748417] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.748419] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.748443] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.751852] ata5.00: ATAPI: HL-DT-ST DVD-RAM GHC0N, MA00, max UDMA/133
[ 1.758469] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.758471] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.759354] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.762026] ata5.00: configured for UDMA/133
[ 1.768601] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GHC0N MA00 PQ: 0 ANSI: 5
[ 1.782072] sda: sda1 sda2 sda3
[ 1.783385] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.788024] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.788906] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[ 1.796268] logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[ 1.797366] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:046D:C512.0002/input/input4
[ 1.801932] sdc:
[ 1.803345] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.806285] sdb:
[ 1.807579] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.852116] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.853056] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.854126] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.854194] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 1.856704] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[ 1.959308] random: fast init done
[ 1.995277] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.996252] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.997125] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.740014] raid6: sse2x1 gen() 12265 MB/s
[ 2.788014] raid6: sse2x1 xor() 8580 MB/s
[ 2.836005] raid6: sse2x2 gen() 14048 MB/s
[ 2.884000] raid6: sse2x2 xor() 8966 MB/s
[ 2.932004] raid6: sse2x4 gen() 16465 MB/s
[ 2.980002] raid6: sse2x4 xor() 10348 MB/s
[ 3.028001] raid6: avx2x1 gen() 22586 MB/s
[ 3.076001] raid6: avx2x1 xor() 15491 MB/s
[ 3.124000] raid6: avx2x2 gen() 26137 MB/s
[ 3.172000] raid6: avx2x2 xor() 16193 MB/s
[ 3.220001] raid6: avx2x4 gen() 30266 MB/s
[ 3.268002] raid6: avx2x4 xor() 19362 MB/s
[ 3.268797] raid6: using algorithm avx2x4 gen() 30266 MB/s
[ 3.269587] raid6: .... xor() 19362 MB/s, rmw enabled
[ 3.270376] raid6: using avx2x2 recovery algorithm
[ 3.271162] clocksource: Switched to clocksource tsc
[ 3.273965] xor: automatically using best checksumming function avx
[ 3.285693] Btrfs loaded, crc32c=crc32c-intel
[ 3.484491] random: crng init done
[ 3.485305] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.631955] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.560645] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.619058] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP

Second part of message from Terminal

+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.640133] systemd[1]: Detected architecture x86-64.
[ 4.654035] systemd[1]: Set hostname to <joeinslw-70AQ0009UX>.
[ 5.923609] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.926021] systemd[1]: Created slice System Slice.
[ 5.928261] systemd[1]: Listening on Journal Socket.
[ 5.930833] systemd[1]: Starting Set the console keyboard layout...
[ 5.933127] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.935407] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.951680] systemd[1]: Starting Load Kernel Modules...
[ 6.218373] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.413157] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 6.441284] lp: driver loaded but no devices found
[ 6.505659] ppdev: user-space parallel port driver
[ 7.784050] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 7.808637] systemd-journald[355]: Received request to flush runtime journal from PID 1
[ 15.290969] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.481555] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
[ 15.549193] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[ 15.549198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.549201] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 15.549203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.549204] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247)
[ 15.549207] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 15.549209] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 15.549211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.549212] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247)
[ 15.549214] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20170831/utaddress-247)
[ 15.549216] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 15.549219] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 15.549221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.549222] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.688082] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.789844] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 15.789845] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 15.789846] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 15.789846] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 15.789847] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 16.372926] AVX2 version of gcm_enc/dec engaged.
[ 16.372926] AES CTR mode by8 optimization enabled
[ 17.517856] kvm: disabled by bios
[ 17.564944] kvm: disabled by bios
[ 17.594251] audit: type=1400 audit(1565619031.094:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=699 comm="apparmor_parser"
[ 17.594437] audit: type=1400 audit(1565619031.094:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=698 comm="apparmor_parser"
[ 17.594438] audit: type=1400 audit(1565619031.094:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=698 comm="apparmor_parser"
[ 17.594440] audit: type=1400 audit(1565619031.094:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=698 comm="apparmor_parser"
[ 17.594934] audit: type=1400 audit(1565619031.094:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=700 comm="apparmor_parser"
[ 17.595089] audit: type=1400 audit(1565619031.094:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=696 comm="apparmor_parser"
[ 17.595091] audit: type=1400 audit(1565619031.094:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser"
[ 17.595092] audit: type=1400 audit(1565619031.094:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=696 comm="apparmor_parser"
[ 17.595094] audit: type=1400 audit(1565619031.094:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser"
[ 17.595343] audit: type=1400 audit(1565619031.094:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=695 comm="apparmor_parser"
[ 17.608887] kvm: disabled by bios
[ 17.641038] kvm: disabled by bios
[ 17.944142] intel_rapl: Found RAPL domain package
[ 17.944143] intel_rapl: Found RAPL domain core
[ 17.944143] intel_rapl: Found RAPL domain uncore
[ 17.944144] intel_rapl: Found RAPL domain dram
[ 17.944146] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 17.944149] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 21.901210] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 22.092178] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 25.618054] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 25.618095] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 87.290401] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=732852 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 87.290414] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=287043 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 87.290421] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:f01c:a075:4edb:5bc1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=321683 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 87.290428] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:f01c:a075:4edb:5bc1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=821061 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 87.290435] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:c28a:c748:bae6:d55c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=546941 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 87.290442] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:c28a:c748:bae6:d55c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=747462 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 87.290449] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:446e:3639:039b:3f7a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=377216 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 87.290457] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:446e:3639:039b:3f7a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=84614 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 87.300543] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=732852 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 87.300553] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=287043 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 90.521959] usblp 3-10:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
[ 90.522004] usbcore: registered new interface driver usblp
[ 115.143559] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.144026] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.144451] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.144863] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.145260] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.145672] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.146082] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.146448] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.146821] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.4.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 115.147301] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.4.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.143222] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.143616] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.144019] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.144511] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.144883] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 241.145268] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.144659] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.145132] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.145607] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.146034] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.146469] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 367.146894] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.142380] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.142817] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.143230] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.143619] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.144018] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 493.144418] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.141946] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.142403] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.142817] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.143206] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00

TTL=1 ID=0 PROTO=2
[ 619.143613] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.144002] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 619.144430] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.141665] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.142087] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.142601] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.142999] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.143415] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 745.143828] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.151183] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.151636] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.152037] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.152509] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.152931] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 871.153340] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.150761] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.151174] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.151569] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.151984] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.152394] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.152815] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 997.153206] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.150234] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.150683] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.151174] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.151555] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.151965] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1123.152367] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.161103] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.161516] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.161928] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.162402] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.162776] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1249.163138] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.160501] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.160939] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.161350] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.161838] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.162127] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.162604] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1375.162977] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.160032] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.160513] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.161018] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.161396] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.161756] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1501.162151] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.159604] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.160019] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.160483] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.160865] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.161259] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1627.161675] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.167849] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.168364] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.168793] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.169211] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.169613] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1753.170015] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.208777] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.209215] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.209664] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.210015] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.210444] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.210891] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 1879.211311] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.208338] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.208814] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.209223] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.209580] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.209984] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2005.210331] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.226705] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.227082] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.227533] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.227911] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.228303] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2131.228692] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.226290] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.226701] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.227099] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.227557] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.227983] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.228306] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2257.228687] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.225904] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.226321] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.226752] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.227230] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.227606] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2383.228001] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.225399] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.225809] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.226262] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.226676] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.227081] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2509.227553] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
Third part of message it was still to long.....
--------------------------------------------------------------------------------------------------------------------------------------------
[ 2635.224856] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.225330] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.225733] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.226157] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.226560] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.226954] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
[ 2635.227367] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.3.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
joeinslw@joeinslw-70AQ0009UX:~$

Useful tip. When you need to post voluminous output, put it between [code][/code] brackets. That will give it an inner window with a scrollbar. That will make it much easier to read.

It may Linux Mint isn't for you. Possibly you need a more "hand holding" system. Linux based OSs aren't necessarily for everyone, although many are extremely user-frienly for the masses.

The [UFW BLOCK] entries are from your firewall logging whole bunches of stuff.

Linux Mint is a hand-holding system. I can hardly think of a more newbie-friendly one.

Sorry, but are you selectively ignoring things?? In post #15, I specifically asked:

• What version of Android your phone was running
• What MODEL phone (after FINALLY learning the brand)
• Where are you going to 'look for' the phone?
• What are you expecting it to actually do??
• What you're wanting to do with the phone after you get it hooked up. Are you trying to copy files to/from? Sync contacts? What???

I also said, "As root, run 'dmesg -c', then plug your phone in, wait a second, and run it again, and capture it to a file. That is relevant diagnostic information, as well as lsusb...as you've been asked to several times." The dmesg command you were asked for would have CLEARED the entire dmesg output, and after plugging your phone in, would have just shown what is RELEVANT TO YOUR PHONE...not pages of stuff to sort through.

If you don't want to provide any information, despite being asked many times for it, there is absolutely no point in posting. We can't guess, read your mind, or do things for you.

I completely agree. I had used it for some time. Not just user friendly, well polished and takes the "just works" reasonably serious.



Just not sure this enough for this user. They're struggling with basic questions and answers - it don't work, I asked you to make it work, why didn't you do it yet?

ondoho,
I'm back from my appointment, and wondered if you had time to look at the terminal results I posted. I had to post it in three sections because there were to many words & numbers. If you did have the time to look at it, please let me know what they tell you.
The cell phone an UmiDigi model is an A-3 Pro.

Thanks,
Joe

I did point you to this article which tells you how to reduce the dmesg stuff you share with us to the essential bits.
If you have difficulty understanding it, please tell me where and what so I can improve the article.
Thanks.

Sorry I guess I didn't understand your instructions, but went back and found out what you need, thanks for being patient with me....
Joe
--------------------------------------------------------------------------------------------------------------------------------------------

[24340.190771] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=10426 PROTO=UDP SPT=58498 DPT=8612 LEN=24
[24346.381791] usb 3-8: new high-speed USB device number 14 using xhci_hcd
[24346.530322] usb 3-8: New USB device found, idVendor=0e8d, idProduct=2008
[24346.530329] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24346.530333] usb 3-8: Product: A3_Pro
[24346.530337] usb 3-8: Manufacturer: UMIDIGI
[24346.530341] usb 3-8: SerialNumber: A3PRO201809033682
[24346.585474] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=732852 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[24346.585485] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:0000:0000:0000:0002 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=287043 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[24346.585493] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:f01c:a075:4edb:5bc1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=321683 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[24346.585501] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:f01c:a075:4edb:5bc1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=821061 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[24346.585509] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:c28a:c748:bae6:d55c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=546941 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[24346.585516] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=2601:0589:8480:0de0:c28a:c748:bae6:d55c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=747462 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[24346.585524] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:446e:3639:039b:3f7a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=377216 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[24346.585532] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:446e:3639:039b:3f7a DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=84614 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[24350.626244] usb 3-8: USB disconnect, device number 14
[24350.933683] usb 3-8: new high-speed USB device number 15 using xhci_hcd
[24351.082538] usb 3-8: New USB device found, idVendor=0e8d, idProduct=2008
[24351.082540] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24351.082541] usb 3-8: Product: A3_Pro
[24351.082542] usb 3-8: Manufacturer: UMIDIGI
[24351.082543] usb 3-8: SerialNumber: A3PRO201809033682
[24361.505587] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=18714 PROTO=UDP SPT=56864 DPT=8612 LEN=24
[24375.705416] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=31873 PROTO=UDP SPT=63515 DPT=8612 LEN=24
[24396.997825] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=19550 PROTO=UDP SPT=56887 DPT=8612 LEN=24
[24418.219424] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=53686 PROTO=UDP SPT=55246 DPT=8612 LEN=24
[24439.524422] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=63444 PROTO=UDP SPT=58924 DPT=8612 LEN=24
[24460.840159] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=47634 PROTO=UDP SPT=64375 DPT=8612 LEN=24
[24475.048524] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=23770 PROTO=UDP SPT=61384 DPT=8612 LEN=24
[24496.304093] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=52679 PROTO=UDP SPT=55748 DPT=8612 LEN=24
[24517.534746] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=5461 PROTO=UDP SPT=52640 DPT=8612 LEN=24
[24538.855667] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:00:23:12:19:49:32:08:00 SRC=192.168.0.5 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=18002 PROTO=UDP SPT=59563 DPT=8612 LEN=24
[24559.706791] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:cc:65:ad:30:ad:e3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2

Again, is there some reason you selectively ignore things??? You were asked, specifically, to run lsusb, and I gave you (twice) the dmesg commands to run. I *STILL* have also asked:

• What version of Android your phone was running
• Where are you going to 'look for' the phone?
• What are you expecting it to actually do??
• What you're wanting to do with the phone after you get it hooked up. Are you trying to copy files to/from? Sync contacts? What???

...and after TWENTY SEVEN posts in this thread, you FINALLY answered and gave us the model. You STILL haven't answered the questions asked previously, and won't use CODE tags as you were asked, when posting a lot of output.

Your phone is 'seen', and the dmesg output you posted says so. And we're back to "answer the questions you've been asked before". You were asked to provide information previously, when posting about this very issue: https://www.linuxquestions.org/quest...es-4175654628/

Are you just expecting something to happen while you sit there? What, exactly, have you actually DONE/TRIED to access your phone???

No, because it worked on Linux Mint 19.1 as well. From what I see with your issue is you have a communication failure between your devices and your distro. This could be either a mechanical failure or software failure. Do those devices work on your computer using a different operating system? If not, it's a mechanical connection issue and has nothing to do with drivers or Linux.

joeinslw,

As said above; your system is seeing your phone, so that's clearly not the problem here. As said above, the next step is to verify if it's a software or hardware issue. My feeling here is that it's a software issue, most likely with Android. The reason I say that is because it depends on your phone as to whether or not it can only be accessed on Linux via MTP, and/or as a regular USB storage device. If the former is true, then you would need to make sure the relevant software is installed on Linux Mint. Even then, this may limit what you can access on your phone via Linux, and how you can access it.

Does your phone have an option (on the PHONE in Android) called something like "USB mass storage" ? If so, then enable that option on your phone if you just want to access files on it's internal SD card, and it should appear on Linux Mint as a regular USB stick.

In any case, if you want meaningful answers, then you need to answer ALL of the questions asked so far.

There are also a number of threads here on LQ that might also help, here's just a few of them:

https://www.linuxquestions.org/quest...ne-4175628072/
https://www.linuxquestions.org/quest...ne-4175646403/
https://www.linuxquestions.org/quest...tu-4175610821/

On Android:

From what I remember, the last version of Android to accept a usb disk you plugged in was 4.4.2. After that it was neutered, as Android can be hacked that way. Presuming you're running later, I think a reboot is required (i.e reboot Android); the Android system sees it on bootup, and it appears in the file manager. Frankly, I doubt if that's a runner, although I haven't read the 31 previous posts here.

Android is better than linux in the area of bluetooth. From Android-5.0 on, devices were permanently pair-able without need for human interference.

dmesg definitely recognizes the device.
Have a look at this article.
Do exactly everything it says in this answer.
If that does not work as expected, please share each an every step in full detail.

jsbjsb001,business_kid,ondoho,

Thanks to all and for all your help, I just found the Android Version 8.1.0 I will try all these responses.
The Android phone is new 4g phone, and I bought it because I was having connection issues with my old phone, but with this one I was never able to connect to Linux or any other computer. Funny thing is my old phone connected to Linux no problem, but I couldn't make a call. This one I can make calls all day long, but it won't connect to Linux.......Go figure...

Thanks again

..and we are now on post #35 in this one thread, where you STILL don't tell us:

• What you're doing to try to connect
• What you're looking at
• What you're trying to do WHEN you connect
• etc.

If you're not going to answer questions, there isn't a point in posting. You've been asked numerous things, asked to provide output of several commands, but haven't done any of it.

AGAIN: There is probably a way of getting your phone into USB storage mode...how, you'll have to figure out, since it probably tells you in the manual that came with your phone. Look it up. After that's done, it will then depend on what you actually are using (like Dolphin, Nautilus, etc.) to access the storage medium. And again, what you actually mean by 'connect' (copy files? use camera? make calls? send texts? sync phonebook? What?????)

You won't answer, and speaking for myself, it's getting old trying to guess and pull answers out of you.

If everyone's time wasn't valuable, and/or others' in need willing to do what it takes... it almost looks like a comedy show. At least he can make calls with his new phone.

I understand that the dmesg can see my device or phone, but it won't let ne find it when I look in files, home screen, it's just not there.
I don't mean to ignore your instructions, but I had one question, does anyone feel that KDE Connect software would help? I got this software off the Linux software manager. I have it installed but doesn't seem to help but I not sure I need to do something other than to load the program which I did. When I try cmake in the terminal, it doesn't recognize it and I get an error.

KDE Connect uses cmake as a build system, which will tell you if you are missing any dependencies. On some distros you will need to install some development packages. Sometimes you will need to get the dependencies by yourself because the development branch of KDE Connect often uses new libraries not included in disto repositories, in which case you can build those yourself or use kdesrc-build. Helpfully, some package managers have a command which will automatically fetch the dependencies for you:

ondoho,

Thank you for finding that article, it's me EXACTLY, it isn't the solution I was hoping for, but this is exactly what is happening to me.

And you **WILL NOT TELL US** where you're looking, how, so how can we BEGIN to help???

AGAIN, flip your device to USB storage...plug it in. That's pretty much it. Whatever you have your system set to do (which you ALSO WILL NOT tell us), it will do. It will show up like any other USB device.
Right...like the package managers in Mint, say?? And if you can't bother telling us what you're doing or answer VERY SIMPLE QUESTIONS, then there IS no software that will somehow 'help' you. KDE connect works beautifully over bluetooth, and over USB. But you are somehow mentioning cmake, dependencies, etc., when you can run
...from one of the MANY hits in Google for "how to install kde connect on linux mint". Even covered on the Mint forums:
https://forums.linuxmint.com/viewtopic.php?t=215124

Did you look at all?? And this STILL won't help you because (for the hundredth time), you have to have your phone visible as a USB device. Since you apparently can't do that or even answer questions, do you think you'd be able to set up a bluetooth connection??? Do you even HAVE bluetooth on your laptop/desktop/phone??

Are you just expecting to plug the phone in and have something happen??? Possible, sure...but even on Windows or Mac, you have to TELL the system to automatically mount device xxxx, and do things. Which you haven't done.

TBone

I have a Linux Mint 19.1 OS desktop which is a Lenovo server computer with 8TB of storage (Can never have enough) Thanks for the terminal codes, I'm loading it right now. Thank you for your help, but the computer still doesn't see my phone.

While I was trying very hard to get playonlinux to install KDE, it crashed.
Then got a message about wine, so I tried to refresh and reinstall wine, that crashed.
At this point I'm ready for bed, dog tired can't take this anymore will try again tomorrow sometime.
Thanks for your efforts.

@TBone You're not going to get the information you want, no matter how many times you ask. Trying to get blood out of a stone is simply driving you mad. If I were you, I'd put this thread on ignore.

joeinslw,

1. Your system ALREADY sees your phone, we've already established that some posts ago now.
2. Go back and read the questions asked, and answer any remaining questions. The most relevant one now would be: EXACTLY what are you trying to access on your phone via Linux ?
3. If you're trying to access files on your phone via Linux, then go back and read what you've already been told (look for the option IN ANDROID, ON YOUR PHONE that says something like "USB mass storage", and ENABLE/SELECT IT. Then see if your phone appears as a normal USB device ON LINUX MINT).
4. If you're not understanding something asked, then SAY SO, and ask for clarification.

I'm done with this thread.

Do you not pay attention, or do you just not understand what you get told??

AGAIN: UNLESS YOU SWITCH YOUR PHONE TO USB STORAGE MODE, IT WILL NOT BE 'SEEN', PERIOD. BY ANYTHING. DO YOU UNDERSTAND THAT??????

I have bolded that for emphasis only, since you're have continually ignored it.
And how does playonlinux get involved here??? What on earth are you trying to load, and why??? Why are you loading wine??? There is ZERO need/purpose to do this. Since you're apparently pulling things out of thin air, instead of paying attention, why haven't you just Googled for "android 8.1 usb storage mode", which brings up, as the VERY FIRST HIT:
https://android.stackexchange.com/qu...ng-on-oreo-8-1

...how to do this. Now to be clear...you DO THIS ON YOUR PHONE, DO YOU UNDERSTAND????

You have been asked very simple questions which you are either unable to understand, or unwilling to answer. The end result is that you WILL NOT be able to get help here, until you do. Not going to bother asking again, since it's apparently pointless. Either go back, read the MANY questions myself and others have asked and actually ANSWER THEM, or don't post back....there is no point.

I gave you very clear instructions for first troubleshooting steps, and how to share information with us so that we can help you, yet you completely ignore that and just keep...
...complaining...
... and complaining...
...and complaining...
...and complaining about how things just do not work for you with Linux.
Conclusion:
You're creating that situation yourself. Have it your way.

Indeed. More surprising, since this behavior goes back at least four years:
https://www.linuxquestions.org/quest...ml#post5495296
https://www.linuxquestions.org/quest...0/#post5551334

Apparently, same 'issues' with HP printers 'not working' (funny, HPLIP has been solid for many years now). I think the OP would be far better served using Windows.

For a long, serious moment I thought that this might be an elaborate troll, but their threads are too few and unevenly spaced, and some just die after one reply... no, this person is quite serious about it, I think. Baffling.
Maybe they just need someone to talk to.

jsbjsb001

I agree that Linux sees my phone when I use sudo DMESG in the terminal, but everyone else who has looked at this problem says it must be a software problem, because it doesn't show up anywhere else. This phone does not have mass storage, it's not microsoft phone, it's an android system. I had an LG phone before this one and all I would do is to plug it in this same computer and it would download anything I wanted. This is an off brand called an UmiDigi which is not user friendly.

Sorry, but are you truly incapable of understanding and reading things????

Post #44...you were handed a link DIRECTLY TO a page, along with search terms to look up others, to put your Android phone into USB storage mode. Did you not read or understand that??? Do you not pay attention to what you're told? Because at this point, it seems like you are intentionally ignoring things, or have problems that can't be solved on a tech forum.

AGAIN, for the hundredth time: READ YOUR PHONE MANUAL. We are not going to continue to look things up for you, only to have you say something that makes it very clear you haven't read or understood what folks have told you. You were given step-by-step instructions on how to do this on Android 8.1, yet here you say "it's not microsoft phone, it's an android system". It took us over 30 posts to get you to tell us that.

Reporting your posts at this point; the moderators can deal with you.

I'm not sure this thread is helping the OP or has any archival information to assist others.

joeinslw, I'll send you a PM/email and I will try to assist you directly on a one to one basis.

If any member has any new information to add to this thread then please assist. Otherwise posting the same information over and over seems to be confusing the thread and not assisting the Linux community.