LinuxQuestions.org - K3b Version:0.11.12 AND CDRDAO PROBLEM!!

- Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)

- - K3b Version:0.11.12 AND CDRDAO PROBLEM!! (https://www.linuxquestions.org/questions/linux-software-2/k3b-version-0-11-12-and-cdrdao-problem-201131/)

K3b Version:0.11.12 AND CDRDAO PROBLEM!!

Hy all i am using slackware 10.0 and i installed recently the K3b. My record is a LG 4040B :D

I am having problems with the k3b when i start recording a image my speed goes to 0 and give me a error output here he goes:

Quote:

System
-----------------------
K3b Version:0.11.12
KDE Version: 3.2.3
QT Version: 3.3.2

cdrdao
-----------------------
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ATAPI:/dev/hdc: HL-DT-ST DVDRAM GSA-4040B Rev: A302
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)
Burning entire 79 mins disc.
Starting write ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Process can be aborted with QUIT signal (usually CTRL-\).
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup write parameters for session-at-once mode.
ERROR: Please try to use the 'generic-mmc-raw' driver.
ERROR: Writing failed.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/hdc --driver generic-mmc:0x00000010 --speed 24 -n -v 2 --eject --remote 19 /tmp/kde-vador/k3bp0Mdnb.tmp.cue

SO i need help with my drive :S what cdrdao is doing wrong??!

Thanks for help ppl [[[]]]]

VaDor

Portugal :D

"ERROR: Please try to use the 'generic-mmc-raw' driver."

Try the suggestion that the output spat at you. The generic-mmc and generic-mmc-raw drivers are usually sufficient for almost every drive. Try to change the driver that cdrdao uses.

You can verify if this is true by attempting your burn from the CLI. man cdrdao will give you the clues, if you read it carefully (coming from one who has pieced together what it means). I suspect that if you do that, you'll write the disk just like stick.

hi!

In k3b i can't change that option i tried that in the k3b frontend but now i will use directly the cdrdao with that driver. Then i will give some news

thanks :D

I can't put k3b working it gives same error when i put that driver!!

:S

When you click on "Burn" choose "Writing mode" - RAW.
excuse my english, it's no soo good
:P
Good luck!