LinuxQuestions.org - K3b fails to burn bin/cue, unable to send cue sheet. here is all debug info.

K3b fails when it tries to send cue sheet. I'm not sure what the meaning is. Here is the debugging output. I did try burning at a slower speed. I still get the same message about unable to send cue sheet.
Code:
System

-----------------------

K3b Version: 0.12.14



KDE Version: 3.5.2

QT Version:  3.3.6

Kernel:      2.6.15-26-386

Devices

-----------------------

PIONEER DVD-RW  DVR-105 1.30 (/dev/hdb, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]



Used versions

-----------------------

cdrecord: 2.1.1a01



cdrecord

-----------------------

/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-26-386

/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.

/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.

scsidev: '/dev/hdb'

devname: '/dev/hdb'

scsibus: -2 target: -2 lun: -2

Warning: Open by 'devname' is unintentional and not supported.

Linux sg driver version: 3.5.27

Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?

: Operation not permitted

/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').

SCSI buffer size: 64512

/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.

/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.

Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord

      and thus may have bugs that are not present in the original version.

      Please send bug reports and support requests to <cdrtools@packages.debian.org>.

      The original author should not be bothered with problems of this version.

TOC Type: 1 = CD-ROM

Using libscg version 'debian-0.8debian2'.

Driveropts: 'burnfree'

atapi: 1

Device type    : Removable CD-ROM

Version        : 0

Response Format: 2

Capabilities  : 

Vendor_info    : 'PIONEER '

Identifikation : 'DVD-RW  DVR-105 '

Revision      : '1.30'

Device seems to be: Generic mmc2 DVD-R/DVD-RW.

Current: 0x0009

Profile: 0x0014 

Profile: 0x0013 

Profile: 0x0011 

Profile: 0x0010 

Profile: 0x000A 

Profile: 0x0009 (current)

Profile: 0x0008 

Using generic SCSI-3/mmc  CD-R/CD-RW driver (mmc_cdr).

Driver flags  : MMC-3 SWABAUDIO BURNFREE 

Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R

Drive buf size : 1267712 = 1238 KB

FIFO size      : 4194304 = 4096 KB

Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?

: Operation not permitted

Track 01: data    1 MB        

Track 02: data  802 MB        

Total size:      803 MB (79:35.25) = 358144 sectors

Lout start:      803 MB (79:37/19) = 358144 sectors

Current Secsize: 2048

ATIP info from disk:

  Indicated writing power: 4

  Is not unrestricted

  Is not erasable

  Disk sub type: Medium Type A, low Beta category (A-) (2)

  ATIP start of lead in:  -12508 (97:15/17)

  ATIP start of lead out: 359845 (79:59/70)

Disk type:    Short strategy type (Phthalocyanine or similar)

Manuf. index: 22

Manufacturer: Ritek Co.

Blocks total: 359845 Blocks current: 359845 Blocks remaining: 1701

Starting to write CD/DVD at speed 16 in real SAO mode for single session.

Last chance to quit, starting real write in 2 seconds.

  1 seconds.

  0 seconds. Operation starts.

Waiting for reader process to fill input buffer ... input buffer ready.

BURN-Free is ON.

Performing OPC...

Sending CUE sheet...

/usr/bin/X11/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.

/usr/bin/X11/cdrecord: Success. send_cue_sheet: scsi sendcmd: no error

CDB:  5D 00 00 00 00 00 00 00 30 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 26 00 00 00

Sense Key: 0x5 Illegal Request, Segment 0

Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0

Sense flags: Blk 0 (not valid) 

resid: 48

cmd finished after 0.014s timeout 200s

/usr/bin/X11/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.

/usr/bin/X11/cdrecord: Cannot send CUE sheet.

/usr/bin/X11/cdrecord: Could not write Lead-in.

Writing  time:    7.487s

/usr/bin/X11/cdrecord: fifo had 64 puts and 0 gets.

/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.



cdrecord command:

-----------------------

/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdb speed=16 -dao driveropts=burnfree cuefile=/home/veronica/Movie.cue -eject