LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)
-   -   Installing and Running Wine Mandrake 9.2 (https://www.linuxquestions.org/questions/linux-software-2/installing-and-running-wine-mandrake-9-2-a-115599/)

saurya_s 11-13-2003 10:46 AM

Installing and Running Wine Mandrake 9.2
 
Hi folks
I could not run Wine even after most suggestions. Here are few Qs which might help me to run it.
1. Where should I install? I have got the rpm for Mandrake 9.2. Or is it that where ever I install , it goes to the right place? Before installing do I need to su?
2. I already have window Xp running on my machine. So, do I need to create a fake ./wine and all the other files in it ? or can I point wint to /mnt/windows?
3. I already have word etc installed on Windows , so will I be able to run them or do I need to install them again in UNIX in wine folder.
4.Can somebody paste a sample config file as I couldn't find one. When I install wine it doesn't make .wine itself.I was suggested to make .wine and other subdirectory inside it and edit the config file.
Thanks very much for your help.
SS

DirtDart 11-13-2003 11:23 AM

Quote:

1. Where should I install? I have got the rpm for Mandrake 9.2. Or is it that where ever I install , it goes to the right place? Before installing do I need to su?
Yes, you have to be root in order to install wine. If you have the .rpm file, as root type: urpmi -p wine<version>.rpm, with <version> being the version number. It will install it in the correct directory. If you want to know where it installed the files, then type: rpm -qa | grep wine<version> | rpm -qil .

Quote:

2. I already have window Xp running on my machine. So, do I need to create a fake ./wine and all the other files in it ? or can I point wint to /mnt/windows?
For most programs, you have to install them in wine, mainly for the registry entries, ect.


Quote:

3. I already have word etc installed on Windows , so will I be able to run them or do I need to install them again in UNIX in wine folder.
Word is one of those programs you will have to install via wine.

linuxbotx 11-13-2003 11:39 AM

Here is my wine config file. You can use this as a base, just change what is right for your system

WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Type" = "floppy"
"Path" = "/media/floppy"
"Label" = "/media/floppy"
"Device" = "/dev/fd0"

[Drive C]
"Path" = "fake_windows"
"Type" = "hd"
"Label" = "fake_windows"
"Filesystem" = "win95"

[Drive D]
"Path"="/media/cdrecorder"
"Label"="cdrecorder"
"Type"="cdrom"
"FS"="win95"
;"Device"="/dev/cdrecorder"

[Drive E]
"Path"="/media/cdrom"
"Label"="cdrom"
"Type"="cdrom"
"FS"="win95"
"Device"="/dev/cdrom"

[Drive F]
"Path"="/media/dvd"
"Label"="dvd"
"Type"="cdrom"
"FS"="win95"
;"Device"="/dev/dvd"

[Drive G]
"Path"="/media/floppy"
"Label"="floppy"
"Type"="cdrom"
"FS"="win95"
;"Device"="/dev/floppy"

[Drive H]
"Path"="/media/zip"
"Label"="zip"
"Type"="cdrom"
"FS"="win95"
;"Device"="/dev/zip"

[Drive M]
"Type" = "cdrom"
"Path" = "/media/cdrom"
"Label" = "/media/cdrom"
"FS" = "win95"
"Device" = "/dev/sr0"

[Drive X]
"Type" = "hd"
"Path" = "/tmp"
"Label" = "Tmp Drive"
"FS" = "win95"

[Drive Y]
"Type" = "network"
"Path" = "%HOME%"
"Label" = "Home"
"FS" = "win95"

[Drive Z]
"Type" = "network"
"Path" = "/"
"Label" = "Root"
"FS" = "win95"

[wine]
"Windows" = "C:\\Windows"
"System" = "C:\\Windows\\System"
"Temp" = "C:\\Windows\\Temp"
"Path" = "C:\\Windows;C:\\Windows\\System;X:\\;Y:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
;"ShowDirSymlinks" = "1"
;"ShowDotFiles" = "1"
"ShellLinker" = "wineshelllink"

# <wineconf>

[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)
;"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"

; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"msvcrt" = "native,builtin"
"msi" = "native,builtin"
; default for all other dlls
"*" = "builtin, native"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use the take focus protocol
"UseTakeFocus" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;"Synchronous" = "Y"
;
; Use the Render extension to render client side fonts (default "Y")
;;"ClientSideWithRender" = "Y"
; Fallback on X core requests to render client side fonts (default "Y")
;;"ClientSideWithCore" = "Y"
; Set both of the previous two to "N" in order to force X11 server side fonts
;
; Anti-alias fonts if using the Render extension (default "Y")
;;"ClientSideAntiAliasWithRender" = "Y"
; Anti-alias fonts if using core requests fallback (default "Y")
;;"ClientSideAntiAliasWithCore" = "Y"
;

[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"

;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"

; the TrueType font dirs you want to make accessible to wine
[FontDirs]
"dir1" = "/usr/X11R6/lib/X11/fonts/truetype"
"dir2" = "/usr/X11R6/lib/X11/fonts/TrueType"
"dir3" = "/usr/X11R6/lib/X11/fonts/TT"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"

[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"

[Debug]
"RelayExclude" = "RtlLeaveCriticalSection;RtlEnterCriticalSection;TlsGetValue;_EnterSysLevel;_LeaveSysLevel;RtlAlloca teHeap;RtlFreeHeap;RtlReAllocateHeap;LOCAL_Lock;LOCAL_Unlock"
;"RelayInclude" = "user32.CreateWindowA"
;"RelayFromExclude" = "user32;x11drv"
;"RelayFromInclude" = "sol.exe"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Where to find the global registries
;"GlobalRegistryDir" = "/etc";
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win95"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/enscript/afm"
"3" = "/usr/X11R6/lib/X11/fonts/Type1"
"4" = "/usr/lib/wine/afm"

[WinMM]
; Uncomment the "Drivers" line matching your sound setting.

"Drivers" = "wineoss.drv" ; default for most common configurations
;"Drivers" = "winearts.drv" ; for KDE
;"Drivers" = "winealsa.drv" ; for ALSA users
;"Drivers" = "winejack.drv" ; for Jack sound server
;"Drivers" = "winenas.drv" ; for NAS sound system
;"Drivers" = "wineaudioio.drv" ; for Solaris machines
;"Drivers" = "" ; to disable sound
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; Forces emulation mode (using wave api)
;"HardwareAcceleration" = "Emulation"
;; Sets default playback device (0 - number of devices - 1)
;"DefaultPlayback" = "0" ; use first device (/dev/dsp)
;"DefaultPlayback" = "1" ; use second device (/dev/dsp1)
;"DefaultPlayback" = "2" ; use third device (/dev/dsp2)
;; Sets default capture device (0 - number of devices - 1)
;"DefaultCapture" = "0" ; use first device (/dev/dsp)
;"DefaultCapture" = "1" ; use second device (/dev/dsp1)
;"DefaultCapture" = "2" ; use third device (/dev/dsp2)

[Network]
;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y").
;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs
;; from the Unix host name. You'll need to set ComputerName in
;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too.
;"UseDnsComputerName" = "N"

[ppd]
"generic" = "/usr/lib/wine/ppd/generic.ppd"

# </wineconf>

#########################################
# Application dependent sections follow #
#########################################

; 3 InstallShield versions who like to put their full screen window in front,
; without any chance to switch to another X11 application.
; So just catch them in a desktop window.

[AppDefaults\\_INS0432._MP\\x11drv]
;"Desktop" = "640x480"

[AppDefaults\\_INS0466._MP\\x11drv]
;"Desktop" = "640x480"

[AppDefaults\\_INS0576._MP\\x11drv]
;"Desktop" = "640x480"

[AppDefaults\\_INS5176._MP\\x11drv]
;"Desktop" = "640x480"

[AppDefaults\\_INS5576._MP\\x11drv]
;"Desktop" = "640x480"

[AppDefaults\\nlnotes.exe\\x11drv]
;"Desktop" = "800x600"
;"Synchronous" = "Y"

[AppDefaults\\notes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

[AppDefaults\\nlnotes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

[AppDefaults\\nhldaemn.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"

saurya_s 11-13-2003 12:38 PM

Thanks guys.
Here is what I got from winehq howto
"If notepad doesn't work for you, you may need to create these directories yourself. To do that, create the following directories in your home directory:


.wine/

.wine/c_drive
.wine/c_drive/Windows
.wine/c_drive/Windows/Fonts
.wine/c_drive/Windows/Start Menu/Programs
.wine/c_drive/Windows/System
.wine/c_drive/Windows/System32
.wine/c_drive/Windows/Temp
.wine/c_drive/Program Files
.wine/c_drive/Program Files/Common Files


After this copy the following files from wine-YYYYMMDD/documentation/samples to $HOME/.wine/Windows:

system.ini
win.ini "




Right I made all the directires as suggested BUT I need these two files-
system.ini
win.ini
which I could not find in the documentaion which is missing in config and these files.
Can somebody paste it for me please.
Thank you so much for putting config file.
I have just made it but will have to read what corrections do I need.
SS


All times are GMT -5. The time now is 07:12 PM.