How can I set up DVB - T with Kaffeine?
 

Hi!
I am trying to set up my computer to watch terrestrial TV here in the UK.
I have been searching and asking other forums for weeks.

my set up

O/S Kubuntu 5.10
M/B Abit AT7-max2
CPU AMD Athlon XP 2500+
Memory 1Gb
Graphics Nvidia GeForce FX 5600 (ChainTech)
TV Tuner Nebula Electronics DigiTV (terrestrial)
Kernal 2.6.12
Modules loaded
Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev11)
Multimedia Audio controller: Brooktree Corporation Bt878 Video Capture (rev11)

I have just ran dmesg and my TV tuner card has been detected. The relevent info is posted below.

[4294695.851000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294695.857000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294695.857000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294695.948000] Linux video capture interface: v1.00
[4294695.996000] bttv: driver version 0.9.15 loaded
[4294695.996000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294696.001000] bttv: Bt8xx card found (0).
[4294696.001000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> I
RQ 17
[4294696.001000] bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 17, latency: 32, mm
io: 0xef005000
[4294696.001000] bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subs
ystem ID is 0071:0101
[4294696.001000] bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
[4294696.001000] bttv0: gpio: en=00000000, out=00000000 in=00ff00cf [init]
[4294696.020000] bttv0: using tuner=-1
[4294696.021000] bttv0: registered device video0
[4294696.022000] bttv0: registered device vbi0
[4294696.022000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294696.047000] bttv0: add subdevice "dvb0"
[4294696.191000] bt878: AUDIO driver version 0.0.0 loaded
[4294696.195000] bt878: Bt878 AUDIO function found (0).
[4294696.195000] ACPI: PCI Interrupt 0000:00:08.1[A] -> GSI 17 (level, low) -> I
IRQ 17
[4294696.195000] bt878(0): Bt878 (rev 17) at 00:08.1, irq: 17, latency: 32, memo
ry: 0xef009000
[4294696.286000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294696.286000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> I
RQ 16

There are no error messages that I can see. It would seem that I need to get the kernel and kaffine talking, but how?

I hope somebody can help and point me in the right direction as I am a complete novice.

Many thanks in advance.

Apappasmurf