#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
#

#======================= Global Settings =======================

[global]
    
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = INGTECH
    
    # server string is the equivalent of the NT Description field
    server string = Jaguar
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no
    
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = yes
    
    
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m
    
    # Cap the size of the individual log files (in KiB).
    max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 3
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d
    
    
    ####### Authentication #######
    
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    security = user
    
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    ;	encrypt passwords = yes
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
    passdb backend = tdbsam
    
    obey pam restrictions = yes
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    ;	pam password change = no
    
    # This option controls how unsuccessful authentication attempts are mapped 
    # to anonymous connections
    map to guest = bad user
    
    ########## Domains ###########
    
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    ########## Printing ##########
    
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    #   load printers = yes
    
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap
    
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;	printing = cups
    ;   printcap name = cups
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    #   socket options = TCP_NODELAY
    
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
    
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    #   domain master = auto
    
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    
    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ;   winbind enum groups = yes
    ;   winbind enum users = yes
    
    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.
    
    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;	usershare max shares = 100
    
    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes
    username map = /etc/samba/smbusers
    ;	guest ok = no
    ;	guest account = nobody
    
    #======================= Share Definitions =======================
    
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares.  This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
    
    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ;   read only = yes
    
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    create mask = 0775
    
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    directory mask = 0775

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    ;	guest ok = no
    ;	read only = yes
    create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    ;	browseable = yes
    writeable = yes
    valid users = server
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[faxes]
    path = /var/spool/hylafax
    writeable = yes
    ;	browseable = yes
    valid users = server

[files]
    path = /mnt/raid
    valid users = server
    browseable = yes
    writeable = yesc
    create mask = 0775
    direcrory mask = 0775

Domain=[LOCALHOST] OS=[Unix] Server=[Samba 3.3.2]

        Sharename       Type      Comment
        ---------       ----      -------
        print$          Disk      Printer Drivers
        faxes           Disk
        files           Disk
        IPC$            IPC       IPC Service (Samba Server)
Domain=[LOCALHOST] OS=[Unix] Server=[Samba 3.3.2]

        Server               Comment
        ---------            -------

        Workgroup            Master
        ---------            -------
        INGTECH