LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 09-05-2008, 05:58 AM   #1
majkel
LQ Newbie
 
Registered: Sep 2007
Posts: 11

Rep: Reputation: 0
hdparm -d1 /hdc shows HDIO_SET_DMA failed (I tried few tricks but still dosn't work)


Hi guys,

I know there are few threads about it but I still can't find a solution.
All I want to know is whether I need to reconfigure kernel or not.
It looks like DMA is on (?):
(Sorry if it's trivial : )

hdparm -i/dev/hdc:
PHP Code:
/dev/hdc:

 
Model=MATSHITADVD-RAM UJ-850FwRev=RB31SerialNo=HA17 080133
 Config
={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 
RawCHS=0/0/0TrkSize=0SectSize=0ECCbytes=0
 BuffType
=unknownBuffSize=0kBMaxMultSect=0
 
(maybe): CurCHS=0/0/0CurSects=0LBA=yesLBAsects=0
 IORDY
=on/offtPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 
PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes
:  sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 
 UDMA modes
udma0 udma1 *udma2 
 AdvancedPM
=no
 Drive conforms to
Unspecified:  ATA/ATAPI-3,4,5,
hdparm -d1 /dev/hdc
PHP Code:

/dev/hdc:
HDIO_SET_DMA operation not permited
 setting using_dma to 1 
(on)
 
using_dma     =  (off

dmesg:
PHP Code:
Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2#2 SMP Tue Jun 19 14:58:11 CDT 2007
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6790
Entering add_active_range
(005240000 entries of 256 used
Zone PFN ranges
:
  
DMA             0 ->     4096
  Normal       4096 
->   229376
  HighMem    229376 
->   524000
early_node_map
[1active PFN ranges
    0
:        ->   524000
On node 0 totalpages
524000
  DMA zone
32 pages used for memmap
  DMA zone
0 pages reserved
  DMA zone
4064 pagesLIFO batch:0
  Normal zone
1760 pages used for memmap
  Normal zone
223520 pagesLIFO batch:31
  HighMem zone
2301 pages used for memmap
  HighMem zone
292323 pagesLIFO batch:31
DMI present
.
ACPIRSDP 000F67100024 (r2 LENOVO)
ACPIXSDT 7FEE67CE0094 (r1 LENOVO TP-63          58  LTP        0)
ACPIFACP 7FEECBC400F4 (r3 INTEL  TP-63          58 ALAN        1)
ACPIDSDT 7FEE85BD4593 (r1 LENOVO TP-63          58 INTL 20060608)
ACPIFACS 7FEEDFC00040
ACPI
APIC 7FEECCB80068 (r1 INTEL  TP-63          58 LOHR       5A)
ACPIHPET 7FEECD200038 (r1 INTEL  TP-63          58 LOHR       5A)
ACPIMCFG 7FEECD58003C (r1 INTEL  TP-63          58 LOHR       5A)
ACPITCPA 7FEECD940032 (r1 Phoeni TP-63          58  TL         0)
ACPISLIC 7FEECDC60176 (r1 LENOVO TP-63          58 TBD         1)
ACPIDBGP 7FEECF3C0034 (r1 LENOVO TP-63          58 LOHR        0)
ACPIAPIC 7FEECF700068 (r1 PTLTD  TP-63          58  LTP        0)
ACPIBOOT 7FEECFD80028 (r1 PTLTD  TP-63          58  LTP        1)
ACPISSDT 7FEE7F6E064F (r1 SataRe  SataPri     1000 INTL 20050624)
ACPISSDT 7FEE78DC0692 (r1 SataRe  SataSec     1000 INTL 20050624)
ACPISSDT 7FEE6E10025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPISSDT 7FEE6D6A00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
ACPISSDT 7FEE68620508 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPIBIOS bugmultiple APIC/MADT foundusing 0
ACPI
: If "acpi_apic_instance=2" works betternotify linux-acpi@vger.kernel.org
ACPI
PM-Timer IO Port0x1008
ACPI
Local APIC address 0xfee00000
ACPI
LAPIC (acpi_id[0x00lapic_id[0x00enabled)
Processor #0 6:15 APIC version 20
ACPILAPIC (acpi_id[0x01lapic_id[0x01enabled)
Processor #1 6:15 APIC version 20
ACPILAPIC_NMI (acpi_id[0x00high edge lint[0x1])
ACPILAPIC_NMI (acpi_id[0x01high edge lint[0x1])
ACPIIOAPIC (id[0x01address[0xfec00000gsi_base[0])
IOAPIC[0]: apic_id 1version 32address 0xfec00000GSI 0-23
ACPI
INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPIINT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPIIRQ0 used by override.
ACPIIRQ2 used by override.
ACPIIRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI
HPET id0x8086a201 base0xfed00000
Using ACPI 
(MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 
(gap80000000:60000000)
Built 1 zonelists.  Total pages519907
Kernel command line
root=/dev/sda2 ro vga=773
mapped APIC to ffffd000 
(fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries4096 (order1216384 bytes)
Detected 1596.142 MHz processor.
Consolecolour dummy device 80x25
Dentry cache hash table entries
131072 (order7524288 bytes)
Inode-cache hash table entries65536 (order6262144 bytes)
Memory2068324k/2096000k available (6215k kernel code26544k reserved2017k data392k init1178496k highmem)
virtual kernel memory layout:
    
fixmap  0xffe17000 0xfffff000   (1952 kB)
    
pkmap   0xff800000 0xffc00000   (4096 kB)
    
vmalloc 0xf8800000 0xff7fe000   111 MB)
    
lowmem  0xc0000000 0xf8000000   896 MB)
      .
init 0xc0915000 0xc0977000   392 kB)
      .
data 0xc0711c79 0xc090a38c   (2017 kB)
      .
text 0xc0100000 0xc0711c79   (6215 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3196.66 BogoMIPS (lpj=6393326)
Security Framework v1.0.0 initialized
Mount
-cache hash table entries512
CPU
After generic identifycapsbfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor
/mwait feature present.
using mwait in idle threads.
CPUL1 I cache32KL1 D cache32K
CPU
L2 cache2048K
CPU
Physical Processor ID0
CPU
Processor Core ID0
CPU
After all initscapsbfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported
.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives24k freed
ACPI
Core revision 20070126
CPU0
Intel(RCore(TM)2 CPU         T5200  1.60GHz stepping 06
Booting processor 1
/1 eip 2000
Initializing CPU
#1
Calibrating delay using timer specific routine.. 3192.07 BogoMIPS (lpj=6384151)
CPUAfter generic identifycapsbfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor
/mwait feature present.
CPUL1 I cache32KL1 D cache32K
CPU
L2 cache2048K
CPU
Physical Processor ID0
CPU
Processor Core ID1
CPU
After all initscapsbfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported
.
Intel machine check reporting enabled on CPU#1.
CPU1Intel(RCore(TM)2 CPU         T5200  1.60GHz stepping 06
Total of 2 processors activated 
(6388.73 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMERvector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization 
[CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost
=50
NET
Registered protocol family 16
ACPI
bus type pci registered
PCI
Using MMCONFIG
Setting up standard PCI resources
ACPI
Interpreter enabled
ACPI
Using IOAPIC for interrupt routing
ACPI
PCI Root Bridge [PCI0] (0000:00)
PCIProbing PCI hardware (bus 00)
PCI quirkregion 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk
region 1180-11bf claimed by ICH6 GPIO
Boot video device is 0000
:01:00.0
PCI
Transparent bridge 0000:00:1e.0
PCI
Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI
PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPIPCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPIPCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPIPCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPIPCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPIPCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPIPCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI
PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI
PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI
PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0disabled.
ACPIPCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPIPCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI
PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Linux Plug and Play Support v0.97 (cAdam Belay
pnp
PnP ACPI init
pnp
PnP ACPIfound 11 devices
SCSI subsystem initialized
libata version 2.20 loaded
.
usbcoreregistered new interface driver usbfs
usbcore
registered new interface driver hub
usbcore
registered new device driver usb
PCI
Using ACPI for IRQ routing
PCI
: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
ieee1394: Initialized config rom entry `ip1394'
PCIEnabling device 0000:05:06.0 (0000 -> 0002)
ACPIPCI Interrupt 0000:05:06.0[A] -> GSI 22 (levellow) -> IRQ 16
PCI
Setting latency timer of device 0000:05:06.0 to 64
Time
tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ohci1394
fw-host0OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d2100800-d2100fff]  Max Packet=[2048]  IR/IT contexts=[4/4]
PCIFailed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
PCIBridge0000:00:01.0
  IO window
disabled.
  
MEM windowd0000000-d1ffffff
  PREFETCH window
c0000000-cfffffff
PCI
Bridge0000:00:1c.0
  IO window
disabled.
  
MEM windowdisabled.
  
PREFETCH windowdisabled.
PCIBridge0000:00:1c.1
  IO window
disabled.
  
MEM windowd2000000-d20fffff
  PREFETCH window
disabled.
PCIBus 6cardbus bridge0000:05:04.0
  IO window
00002400-000024ff
  IO window
00002800-000028ff
  PREFETCH window
88000000-8bffffff
  MEM window
8c000000-8fffffff
PCI
Bridge0000:00:1e.0
  IO window
2000-2fff
  MEM window
d2100000-d21fffff
  PREFETCH window
88000000-8bffffff
ACPI
PCI Interrupt 0000:00:01.0[A] -> GSI 16 (levellow) -> IRQ 17
PCI
Setting latency timer of device 0000:00:01.0 to 64
ACPI
PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (levellow) -> IRQ 18
PCI
Setting latency timer of device 0000:00:1c.0 to 64
ACPI
PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (levellow) -> IRQ 17
PCI
Setting latency timer of device 0000:00:1c.1 to 64
PCI
Enabling device 0000:00:1e.0 (0004 -> 0007)
PCISetting latency timer of device 0000:00:1e.0 to 64
ACPI
PCI Interrupt 0000:05:04.0[A] -> GSI 16 (levellow) -> IRQ 17
NET
Registered protocol family 2
IP route cache hash table entries
32768 (order5131072 bytes)
TCP established hash table entries131072 (order81572864 bytes)
TCP bind hash table entries65536 (order7524288 bytes)
TCPHash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
apm
BIOS not found.
highmem bounce pool size64 pages
VFS
Disk quotas dquot_6.5.1
Dquot
-cache hash table entries1024 (order 04096 bytes)
NTFS driver 2.1.28 [FlagsR/W].
JFSnTxBlock 8192nTxLock 65536
SGI XFS with ACLs
security attributeslarge block numbersno debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel 
interface loaded
GFS2 
(built Jun 19 2007 14:57:33installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered 
(default)
PCISetting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service
[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCISetting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service
[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCISetting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service
[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplugPCI Hot Plug PCI Core version0.5
vesafb
framebuffer at 0xc0000000mapped to 0xf8d80000using 1536ktotal 131072k
vesafb
mode is 1024x768x8linelength=1024pages=3
vesafb
: protected mode interface info at c000:d5c0
vesafb
pmiset display start c00cd5f6set palette c00cd660
vesafb
pmiports 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb
scrollingredraw
vesafb
Pseudocolorsize=8:8:8:8shift=0:0:0:0
Console
switching to colour frame buffer device 128x48
fb0
VESA VGA frame buffer device
isapnp
Scanning for PnP cards...
isapnpNo Plug Play device found
Real Time Clock Driver v1.12ac
Serial
8250/16550 driver $Revision1.90 4 portsIRQ sharing enabled
ieee1394
Host addedID:BUS[0-00:1023]  GUID[00023f71ab4082b2]
floppy0no floppy controllers found
RAMDISK driver initialized
16 RAM disks of 16384K size 1024 blocksize
loop
loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
inputMacintosh mouse button emulation as /class/input/input0
Uniform Multi
-Platform E-IDE driver Revision7.00alpha2
ide
Assuming 33MHz system bus speed for PIO modesoverride with idebus=xx
ide0
I/O resource 0x1F0-0x1F7 not free.
ide0ports already in use, skipping probe
Probing IDE 
interface ide1...
hdcMATSHITADVD-RAM UJ-850ATAPI CD/DVD-ROM drive
ide1 at 0x170
-0x177,0x376 on irq 15
hdc
ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive2048kB Cache
Uniform CD
-ROM driver Revision3.20
ide
-floppy driver 0.99.newide
Loading iSCSI transport 
class v2.0-724.
iscsi
registered transport (tcp)
Loading Adaptec I2O RAIDVersion 2.4 Build 5go
Detecting Adaptec I2O RAID controllers
...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xxAdaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi
: <fdomainDetection failed (no card)
sym53c416.cVersion 1.0.0-ac
qlogicfas
no cards were foundplease specify I/O address and IRQ using iobase= and irqoptions<6>QLogic Fibre Channel HBA Driver
iscsi
registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright
(c2004-2006 Emulex.  All rights reserved.
seagateST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390clustering now enabled by default. If you get problems load
    with 
"disable_clustering=1" and report to maintainers
megaraid cmm
2.20.2.7 (Release DateSun Jul 16 00:01:03 EST 2006)
megaraid2.20.5.1 (Release DateThu Nov 16 15:32:35 EST 2006)
megasas00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT
-HAStorage RAID Controller DriverVersion3.05
GDT
-HAFound 0 PCI Storage RAID Controllers
3ware Storage Controller device driver 
for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32loading...
iprIBM Power RAID SCSI Device Driver version2.3.1 (January 232007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
stVersion 20070203fixed bufsize 32768s/g segs 256
ata_piix 0000
:00:1f.2version 2.10ac1
ata_piix 0000
:00:1f.2MAP P0 P2 IDE IDE ]
ACPIPCI Interrupt 0000:00:1f.2[B] -> GSI 19 (levellow) -> IRQ 19
ata
0x170 IDE port busy
ata
conflict with ide1
PCI
Setting latency timer of device 0000:00:1f.2 to 64
ata1
SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
ata2
DUMMY
scsi2 
ata_piix
ata1.00
ATA-7TOSHIBA MK1234GSXAH002Emax UDMA/100
ata1.00
234441648 sectorsmulti 16LBA48 
ata1.00
configured for UDMA/100
scsi3 
ata_piix
scsi 2
:0:0:0Direct-Access     ATA      TOSHIBA MK1234GS AH00 PQ0 ANSI5
SCSI device sda
234441648 512-byte hdwr sectors (120034 MB)
sdaWrite Protect is off
sda
Mode Sense00 3a 00 00
SCSI device sda
write cacheenabledread cacheenableddoesn't support DPO or FUA
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
 sda
sda1 sda2 sda3 sda5 >
sd 2:0:0:0Attached scsi disk sda
I2O subsystem v1.325
i2o
max drivers 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright 
(c1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon
debugfs is not available
ACPI
PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (levellow) -> IRQ 20
PCI
Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000
:00:1d.7EHCI Host Controller
ehci_hcd 0000
:00:1d.7: new USB bus registeredassigned bus number 1
ehci_hcd 0000
:00:1d.7debug port 1
PCI
cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000
:00:1d.7irq 20io mem 0xd2404000
ehci_hcd 0000
:00:1d.7USB 2.0 startedEHCI 1.00driver 10 Dec 2004
usb usb1
configuration #1 chosen from 1 choice
hub 1-0:1.0USB hub found
hub 1
-0:1.08 ports detected
116x
driver isp116x-hcd03 Nov 2005
ohci_hcd
2006 August 04 USB 1.1 'Open' Host Controller (OHCIDriver
USB Universal Host Controller 
Interface driver v3.0
ACPI
PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (levellow) -> IRQ 20
PCI
Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000
:00:1d.0UHCI Host Controller
uhci_hcd 0000
:00:1d.0: new USB bus registeredassigned bus number 2
uhci_hcd 0000
:00:1d.0irq 20io base 0x00001800
usb usb2
configuration #1 chosen from 1 choice
hub 2-0:1.0USB hub found
hub 2
-0:1.02 ports detected
ACPI
PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (levellow) -> IRQ 19
PCI
Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000
:00:1d.1UHCI Host Controller
uhci_hcd 0000
:00:1d.1: new USB bus registeredassigned bus number 3
uhci_hcd 0000
:00:1d.1irq 19io base 0x00001820
usb usb3
configuration #1 chosen from 1 choice
hub 3-0:1.0USB hub found
hub 3
-0:1.02 ports detected
ACPI
PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (levellow) -> IRQ 21
PCI
Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000
:00:1d.2UHCI Host Controller
uhci_hcd 0000
:00:1d.2: new USB bus registeredassigned bus number 4
uhci_hcd 0000
:00:1d.2irq 21io base 0x00001840
usb usb4
configuration #1 chosen from 1 choice
hub 4-0:1.0USB hub found
hub 4
-0:1.02 ports detected
ACPI
PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (levellow) -> IRQ 17
PCI
Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000
:00:1d.3UHCI Host Controller
uhci_hcd 0000
:00:1d.3: new USB bus registeredassigned bus number 5
uhci_hcd 0000
:00:1d.3irq 17io base 0x00001860
usb usb5
configuration #1 chosen from 1 choice
hub 5-0:1.0USB hub found
hub 5
-0:1.02 ports detected
sl811
driver sl811-hcd19 May 2005
Initializing USB Mass Storage driver
...
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4
-2configuration #1 chosen from 1 choice
usbcoreregistered new interface driver usb-storage
USB Mass Storage support registered
.
usbcoreregistered new interface driver hiddev
usbcore
registered new interface driver usbhid
drivers
/usb/input/hid-core.cv2.6:USB HID core driver
PNP
PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2Mat 0x60,0x64 irq 1,12
i8042
.cDetected active multiplexing controllerrev 1.1.
serioi8042 KBD port at 0x60,0x64 irq 1
serio
i8042 AUX0 port at 0x60,0x64 irq 12
serio
i8042 AUX1 port at 0x60,0x64 irq 12
serio
i8042 AUX2 port at 0x60,0x64 irq 12
serio
i8042 AUX3 port at 0x60,0x64 irq 12
mice
PS/2 mouse device common for all mice
md
linear personality registered for level -1
md
raid0 personality registered for level 0
md
raid1 personality registered for level 1
md
raid10 personality registered for level 10
input
AT Translated Set 2 keyboard as /class/input/input1
raid6
int32x1    310 MB/s
raid6
int32x2    314 MB/s
raid6
int32x4    250 MB/s
raid6
int32x8    233 MB/s
raid6
mmxx1     1024 MB/s
raid6
mmxx2     1179 MB/s
raid6
sse1x1     715 MB/s
raid6
sse1x2     912 MB/s
raid6
sse2x1    1340 MB/s
raid6
sse2x2    1640 MB/s
raid6
using algorithm sse2x2 (1640 MB/s)
mdraid6 personality registered for level 6
md
raid5 personality registered for level 5
md
raid4 personality registered for level 4
raid5
automatically using best checksumming function: pIII_sse
   pIII_sse  
:  2894.000 MB/sec
raid5
using function: pIII_sse (2894.000 MB/sec)
mdmultipath personality registered for level -4
device
-mapperioctl4.11.0-ioctl (2006-10-12initialiseddm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET
Registered protocol family 1
NET
Registered protocol family 17
Using IPI Shortcut mode
md
Autodetecting RAID arrays.
mdautorun ...
md: ... autorun DONE
uname -r:
2.6.21.5

Thanks a lot for any help,
majkel
 
Old 09-05-2008, 12:10 PM   #2
kilgoretrout
Senior Member
 
Registered: Oct 2003
Posts: 2,799

Rep: Reputation: 281Reputation: 281Reputation: 281
Which distro are you using and are you having any problems playing dvds on your optical drive /dev/hdc?

Your kernel is relatively old and was compiled during the time the ide framework in the kernel was in the process of being deprecated and control of ide drives was being shifted to libata using the scsi protocol. During that time period, a lot of people reported problems with their optical drives and setting dma.
 
Old 09-06-2008, 04:01 AM   #3
majkel
LQ Newbie
 
Registered: Sep 2007
Posts: 11

Original Poster
Rep: Reputation: 0
Thanks kilgoretrout.
Im using Slackware 12.0. And you're right, CD/DVD are extremely slow so thats the main problem.
There are recepies like editing libata.h in "include/linux/libata.h" (change #undef to #define ATA_ENABLE_ATAPI /* define to enable ATAPI support */). But I don't even have this line it my file !
What do you suggest then ? Should I play (reconfigure) with my old kernel or simply get newer one ?

Thanks a lot !

majkel
 
Old 09-06-2008, 04:10 AM   #4
i92guboj
Gentoo support team
 
Registered: May 2008
Location: Lucena, Córdoba (Spain)
Distribution: Gentoo
Posts: 4,083

Rep: Reputation: 404Reputation: 404Reputation: 404Reputation: 404Reputation: 404
You need to select the correct driver for your chipset on your kernel. Then reconfigure, recompile and reinstall it, then reboot.

You can't enable the dma until you have that driver loaded. Right now you are using the generic ide driver.

Alternatively, you can just upgrade, and in the way, migrate to SATA/PATA stuff. Be aware that that will require some additional changes (very minor) on /etc/fstab and the configuration of your bootloader, since all the drives will be renamed to sd<X> instead of hd<X>.

You decide.

To find your chipset you can use lspci.
 
Old 09-08-2008, 04:58 AM   #5
majkel
LQ Newbie
 
Registered: Sep 2007
Posts: 11

Original Poster
Rep: Reputation: 0
Thanks a lot i92guboj,

I'm going to reconfigure my kernel then.
I'll inform you if I succeeded : )
Cheers,

majkel
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
hdparm -d1 /dev/hda gives me "HDIO_SET_DMA failed: Operation not permitted" elluva Linux - Hardware 7 07-21-2007 04:49 AM
HDIO_SET_DMA failed: Operation not permitted (???) Ellops Slackware 8 08-11-2006 07:00 PM
hdparm -d1 /dev/hdc linuxnubx Linux - Newbie 5 08-31-2004 06:50 AM
HDIO_SET_DMA failed: Operation not permitted acjt Linux - Hardware 4 05-02-2003 11:52 PM
HDIO_SET_DMA failed: Operation not permitted markus1982 Linux - General 2 10-28-2002 05:56 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 06:59 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration