Quote:
Originally Posted by x_terminat_or_3
Dear sasciame
You need to look at all the parameters.
(as root)
Code:
smartctl -a /dev/sda
This will output a table with several columns.
Look for the text 'In_the_past', or other wording in the column WHEN FAILED |
I think it looks ok
steven@steven-laptop:~$ sudo smartctl -a /dev/sda
[sudo] password for steven:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: HITACHI Travelstar DK23XX/DK23XXB series
Device Model: HITACHI_DK23EA-40
Serial Number: 2D1038
Firmware Version: 00K3A0A2
User Capacity: 40,007,761,920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3
Local Time is: Thu Aug 6 15:32:36 2009 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2020) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 34) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000d 100 100 050 Pre-fail Offline - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 3925
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7921
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 409
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 1230
9 Power_On_Minutes 0x0032 066 066 000 Old_age Always - 17059h+21m
10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5242
191 G-Sense_Error_Rate 0x000a 100 098 000 Old_age Always - 762
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 641
193 Load_Cycle_Count 0x0032 002 002 000 Old_age Always - 592499/591857
194 Temperature_Celsius 0x0022 076 032 000 Old_age Always - 52 (Lifetime Min/Max 7/74)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 57
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0012 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0012 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x0012 100 100 000 Old_age Always - 0
230 Head_Amplitude 0x0032 082 082 000 Old_age Always - 557589
250 Read_Error_Retry_Rate 0x000a 100 100 000 Old_age Always - 789
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 17058 -
Device does not support Selective Self Tests/Logging
steven@steven-laptop:~$
