LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 06-11-2019, 10:01 AM   #1
CestRic
LQ Newbie
 
Registered: Feb 2015
Posts: 27
Blog Entries: 1

Rep: Reputation: Disabled
Garmin Express won't install under wine.


There's not much help for this on the net in general so I'm struggling here. I'm running Mint Tara with Cinnamon and trying to compile maps and install them on my Garmin.
I followed the instructions on this link which may help some of you https://www.christitus.com/2019/02/1...express-linux/
But it didn't help me. I'm guessing there are some packets for Wine which are missing but, of course, I have no indication as to what they are.

To clarify: I can download generic up to date maps from http://garmin.openstreetmap.nl. Simply Download the*osm_generic_gmapsupp.zip*("Compressed file that contains a single image that can be placed directly onto the SD-card of the GPS.") file Extract the file*gmapsupp.img, and rename it to*gmapprom.img, then with Nautilus, copy the extracted file on your device, replacing the old (backuped)*gmapprom.img*file. I emphasize that this is copied to the SD card which you plug into your computer. If your Garmin doesn't have a SD or TF card you still need Garmin Express to load it.

I this instance I needed to compile a map of several European countries I visit regularly. I compiled it using MapSource from Garmin but, I need GarminExpress, to load my Garmin Nuvi so that the computer sees it. Then I can send it the compiled maps. Must be less than the Garmin maximum of four gig.

Any suggestions would be appreciated.
 
Old 06-11-2019, 07:24 PM   #2
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and CentOS
Posts: 5,819

Rep: Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321
Hi,

I'm a little surprised that you can't mount the Garmin filesystem. What happens if you turn the it off and then connect it via a usb cable to your computer? Does it not present itself as a fat file system? This is what mine (without SD cards) have always done.

See https://wiki.openstreetmap.org/wiki/...n_on_GNU/Linux

Evo2.
 
Old 06-12-2019, 12:11 AM   #3
CestRic
LQ Newbie
 
Registered: Feb 2015
Posts: 27

Original Poster
Blog Entries: 1

Rep: Reputation: Disabled
Thanks for the input, and yes, I was surprised as mine mounted under Mint 17 as you say and could be seen as a drive. Very strange. I even began to distrust the cable so changed that as well. Restarting with it plugged in or plugging in after start up, all get the same result. Got me baffled.
Will try your link Thanks.
 
Old 06-12-2019, 01:02 AM   #4
CestRic
LQ Newbie
 
Registered: Feb 2015
Posts: 27

Original Poster
Blog Entries: 1

Rep: Reputation: Disabled
Now that was interesting, on the command 'dmesg' it's giving me a whole load of errors. One concerns the trackpad which has always given intermittent problems and frequently ceases to function, so I use a pen mouse when it does.
However this set of errors is repeated for each USB port.

2.312786] i2c_hid i2c-DLL06AB:00: failed to set a report to device.
[ 2.312793] hid-rmi 0018:06CB:78F1.0001: failed to write hid report (-121)
[ 2.312797] hid-rmi 0018:06CB:78F1.0001: failed to write request output report (-121)
[ 2.312801] rmi4_physical rmi4-00: Read PDT entry at 0x01e3 failed, code: -121.
[ 2.312804] rmi4_physical rmi4-00: IRQ counting failed with code -121.
[ 2.312815] rmi4_physical: probe of rmi4-00 failed with error -121
[ 2.312891] input: DLL06AB:00 06CB:78F1 as /devices/platform/80860F41:00/i2c-0/i2c-DLL06AB:00/0018:06CB:78F1.0001/input/input7
[ 2.313018] hid-rmi 0018:06CB:78F1.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06AB:00 06CB:78F1] on i2c-DLL06AB:00
[ 2.313101] i2c_hid i2c-DLL06AB:00: failed to change power setting.
[ 2.315633] fbcon: inteldrmfb (fb0) is primary device
[ 2.315716] Console: switching to colour frame buffer device 170x48
[ 2.315750] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.484179] usb 1-1: device descriptor read/64, error -71
[ 2.565408] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.566514] ata1.00: ATA-9: WDC WD5000LPVX-75V0TT0, 01.01A01, max UDMA/133
[ 2.566518] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.567742] ata1.00: configured for UDMA/133
[ 2.568326] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-7 1A01 PQ: 0 ANSI: 5
[ 2.568850] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.568871] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.568874] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.568902] sd 0:0:0:0: [sda] Write Protect is off
[ 2.568905] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.568956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.607533] sda: sda1
[ 2.608110] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.720185] usb 1-1: new full-speed USB device number 3 using xhci_hcd
[ 2.848266] usb 1-1: device descriptor read/64, error -71
[ 3.084770] usb 1-1: device descriptor read/64, error -71
[ 3.192534] usb usb1-port1: attempt power cycle
[ 3.844438] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[ 3.845123] usb 1-1: Device not responding to setup address.
[ 4.052854] usb 1-1: Device not responding to setup address.
[ 4.260430] usb 1-1: device not accepting address 4, error -71
[ 4.388451] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[ 4.389215] usb 1-1: Device not responding to setup address.
[ 4.596798] usb 1-1: Device not responding to setup address.
[ 4.804451] usb 1-1: device not accepting address 5, error -71
[ 4.804567] usb usb1-port1: unable to enumerate USB device
[ 4.932462] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[ 5.084619] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 5.084623] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.084626] usb 1-2: Product: USB2.0 Hub
[ 5.085647] hub 1-2:1.0: USB hub found
[ 5.085995] hub 1-2:1.0: 4 ports detected
[ 5.216452] usb

Does that mean anything to anyone?
 
Old 06-12-2019, 07:45 PM   #5
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and CentOS
Posts: 5,819

Rep: Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321Reputation: 1321
Hi,
Quote:
Originally Posted by CestRic View Post
Thanks for the input, and yes, I was surprised as mine mounted under Mint 17 as you say and could be seen as a drive. Very strange. I even began to distrust the cable so changed that as well.
So you mounted it in the past under Linux? What has changed since then?

Evo2.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] Garmin maps updater run with Wine? seaguy Ubuntu 2 04-26-2013 11:27 AM
PCI Express 3.0 video card on PCI Express 2.0 motherboard, will it work? Compatibles? nando321 Linux - Hardware 2 02-09-2013 01:37 AM
SLI with PCI Express and PCI Express 2 Cards? ESC201 Linux - Hardware 2 07-10-2009 08:41 PM
Getting a program under WINE to recognize IE under WINE (sounds fun, eh?) WhiteyDude Linux - Software 1 10-14-2007 01:14 PM
Graphics Card: PCI Express x16 Detected as PCI Express Link width: 4X deepclutch Linux - Hardware 3 06-09-2007 10:10 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 04:44 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration