Im a newbee.
I have tryed 2.6.5 and 2.6.6 with the same result. It dosn't find my Sata disk andprints out dissabling irq 18.
I use 2.4.22 to write this on the same maskine.
Here is the boot print out and error mesage.
Let me know if its some thing mor you what to know.
the distro is a mandrake 9.2.
the sata disk is a 70gb seagate.
PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5230
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5e1a, dseg 0xf0000
PNPBIOS fault.. attempting recovery.
PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
PnPBIOS: You may need to reboot with the "nobiospnp" option to operate stably
PnPBIOS: Check with your vendor for an updated BIOS
PnPBIOS: get_dev_node: unexpected status 0x28
PnPBIOS: 6 nodes reported by PnP BIOS; 6 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:1f[A] -> 2-18 -> IRQ 18 level low
00:00:1f[B] -> 2-17 -> IRQ 17 level low
00:00:1d[A] -> 2-16 -> IRQ 16 level low
00:00:1d[B] -> 2-19 -> IRQ 19 level low
00:00:1d[D] -> 2-23 -> IRQ 23 level low
00:03:08[A] -> 2-20 -> IRQ 20 level low
00:03:09[A] -> 2-21 -> IRQ 21 level low
00:03:09[B] -> 2-22 -> IRQ 22 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 B9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 A9
13 001 01 1 1 0 1 0 1 1 C1
14 001 01 1 1 0 1 0 1 1 D1
15 001 01 1 1 0 1 0 1 1 D9
16 001 01 1 1 0 1 0 1 1 E1
17 001 01 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: 100% native mode on irq 18
ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda
MA, hdb
io
ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc
MA, hdd
io
hda: IBM-DJNA-371350, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0xefe0-0xefe7,0xefae on irq 18
hdc: Hewlett-Packard CD-Writer Plus 9500, ATAPI CD/DVD-ROM drive
ide1 at 0xefa0-0xefa7,0xefaa on irq 18
hda: max request size: 128KiB
hda: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=26310/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
libata version 1.02 loaded.
ata_piix version 1.02
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEF88 ctl 0xEF86 bmdma 0xEE60 irq 18
ata2: SATA max UDMA/133 cmd 0xEF68 ctl 0xEF82 bmdma 0xEE68 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors (lba48)
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
ata2: thread exiting
scsi1 : ata_piix
Vendor: ATA Model: ST380013AS Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB USB2
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem e080b800
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000eec0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000ef00
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000ef20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB USB
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 16, io base 0000ef40
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kmem_cache_create: duplicate cache revoke_record
------------[ cut here ]------------
kernel BUG at mm/slab.c:1372!
invalid operand: 0000 [#1]
CPU: 0
EIP: 0060:[<c01377da>] Not tainted
EFLAGS: 00010202 (2.6.6)
EIP is at kmem_cache_create+0x418/0x569
eax: 00000031 ebx: dfdc7670 ecx: c041aa68 edx: 000032c1
esi: c0302969 edi: e0827912 ebp: dfd4df68 esp: dfd4df34
ds: 007b es: 007b ss: 0068
Process insmod (pid: 137, threadinfo=dfd4c000 task=dfd4f730)
Stack: c0300c00 e0827904 00000010 00002000 dfd4df58 dfd8353c c0000000 fffffff0
dfd83500 00000000 c034cd94 e082c780 c034cd7c dfd4df88 e082e03a e0827904
00000010 00000010 00002000 00000000 00000000 dfd4df90 e082e10d dfd4df9c
Call Trace:
[<e082e03a>] journal_init_revoke_caches+0x3a/0xa9 [jbd]
[<e082e10d>] journal_init_caches+0x8/0x1e [jbd]
[<e082e12c>] journal_init+0x9/0x1e [jbd]
[<c012d2b9>] sys_init_module+0xf3/0x1c9
[<c0105d43>] syscall_call+0x7/0xb
Code: 0f 0b 5c 05 e0 03 30 c0 eb ce 8b 5d e4 b8 00 e0 ff ff 21 e0
kmem_cache_create: duplicate cache ext3_xattr
------------[ cut here ]------------
kernel BUG at mm/slab.c:1372!
invalid operand: 0000 [#2]
CPU: 0
EIP: 0060:[<c01377da>] Not tainted
EFLAGS: 00010202 (2.6.6)
EIP is at kmem_cache_create+0x418/0x569
eax: 0000002e ebx: dfdc7770 ecx: c041aa68 edx: 00003702
esi: c03026d6 edi: e0864cfd ebp: dfd4df38 esp: dfd4df04
ds: 007b es: 007b ss: 0068
Process insmod (pid: 138, threadinfo=dfd4c000 task=dfd4f730)
Stack: c0300c00 e0864cf2 00000004 00020000 dfd4df28 dfd834bc c0000000 fffffffc
dfd83480 00000028 00000040 dfd049c4 00000001 dfd4df6c c016db91 e0864cf2
0000002c 00000004 00020000 00000000 00000000 00000200 00000040 00000000
Call Trace:
[<c016db91>] mb_cache_create+0x156/0x1bf
[<e080d0b6>] init_ext3_xattr+0x6f/0xb1 [ext3]
[<e080d00c>] init_ext3_fs+0xc/0x47 [ext3]
[<c012d2b9>] sys_init_module+0xf3/0x1c9
[<c0105d43>] syscall_call+0x7/0xb
Code: 0f 0b 5c 05 e0 03 30 c0 eb ce 8b 5d e4 b8 00 e0 ff ff 21 e0
<6>kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 256k freed
usb 5-1: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1
usb 5-2: new full speed USB device using address 3
usb 4-1: new full speed USB device using address 2
Real Time Clock Driver v1.12
kmem_cache_create: duplicate cache sgpool-8
------------[ cut here ]------------
kernel BUG at mm/slab.c:1372!
invalid operand: 0000 [#3]
CPU: 0
EIP: 0060:[<c01377da>] Not tainted
EFLAGS: 00010202 (2.6.6)
EIP is at kmem_cache_create+0x418/0x569
eax: 0000002c ebx: dfdc7f70 ecx: c041aa68 edx: 00003d3e
esi: c0314794 edi: e083c3bf ebp: df55bf5c esp: df55bf28
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 529, threadinfo=df55a000 task=df067330)
Stack: c0300c00 e083c3b6 00000080 00002000 df55bf4c dfd8343c c0000000 ffffff80
dfd83400 00000000 00000000 00000000 c034cd7c df55bf84 e080f11c e083c3b6
00000080 00000080 00002000 00000000 00000000 c034cd94 e084d480 df55bf9c
Call Trace:
[<e080f11c>] scsi_init_queue+0x47/0xcb [scsi_mod]
[<e080f00c>] init_scsi+0xc/0xd5 [scsi_mod]
[<c012d2b9>] sys_init_module+0xf3/0x1c9
[<c0105d43>] syscall_call+0x7/0xb
Code: 0f 0b 5c 05 e0 03 30 c0 eb ce 8b 5d e4 b8 00 e0 ff ff 21 e0
<6>EXT3 FS on hda1, internal journal
Adding 1060248k swap on /dev/hda5. Priority:-1 extents:1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
hda: dma_timer_expiry: dma status == 0x24
hda: DMA interrupt recovery
hda: lost interrupt
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
[<c0107db9>] __report_bad_irq+0x2b/0x8c
[<c0107eb3>] note_interrupt+0x7a/0x98
[<c01080ab>] do_IRQ+0xdd/0xfb
[<c01066b0>] common_interrupt+0x18/0x20
[<c010404f>] default_idle+0x26/0x2b
[<c01040b2>] cpu_idle+0x2a/0x38
[<c03cc75b>] start_kernel+0x172/0x1af
[<c03cc498>] unknown_bootoption+0x0/0x11e
handlers:
[<c02272be>] (ide_intr+0x0/0x139)
[<c02272be>] (ide_intr+0x0/0x139)
[<c023fe72>] (ata_interrupt+0x0/0x120)
[<c02516a3>] (usb_hcd_irq+0x0/0x64)
Disabling IRQ #18
lspci -v for my 2.4.22
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80f6
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fc800000-fe8fffff
Prefetchable memory behind bridge: d7f00000-f7efffff
00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at eec0 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ef00 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ef20 [size=32]
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ef40 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at efe0 [size=8]
I/O ports at efac [size=4]
I/O ports at efa0 [size=8]
I/O ports at efa8 [size=4]
I/O ports at ef90 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 18
I/O ports at ef88 [size=8]
I/O ports at ef84 [size=4]
I/O ports at ef68 [size=8]
I/O ports at ef80 [size=4]
I/O ports at ee60 [size=16]
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: medium devsel, IRQ 17
I/O ports at 0400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80f3
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e800 [size=256]
I/O ports at ee80 [size=64]
Memory at febff400 (32-bit, non-prefetchable) [size=512]
Memory at febff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900 Ultra] (rev a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8133
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: <available only to root>
02:01.0 Ethernet controller: Intel Corp.: Unknown device 1019
Subsystem: Asustek Computer, Inc.: Unknown device 80f7
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 18
Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at cf80 [size=32]
Capabilities: <available only to root>
03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808a
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at dc00 [size=128]
Capabilities: <available only to root>
Hope you could help me.
