LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 03-02-2005, 01:07 AM   #1
abirami
Member
 
Registered: Aug 2004
Posts: 47

Rep: Reputation: 15
collect2: ld returned 1 exit status


i am trying to compile redboot bootloader

when i give make i get the followowing error

/usr/local/bin/sh4-linux-gcc -c -I/opt/sh-redboot/install/include -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/src -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/tests -I. -finline-limit=7000 -ml -m3 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -ggdb -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -o /opt/sh-redboot/install/lib/version.o /home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/src/version.c
/usr/local/bin/sh4-linux-gcc -ml -m3 -ggdb -nostdlib -Wl,--gc-sections -Wl,-static -L/opt/sh-redboot/install/lib -Ttarget.ld -o /opt/sh-redboot/install/bin/redboot.elf /opt/sh-redboot/install/lib/version.o
/home/cross/tools/bin/sh-linux-ld: warning: no memory region specified for section `.got'
/home/cross/tools/bin/sh-linux-ld: warning: no memory region specified for section `.got.plt'
/home/cross/tools/bin/sh-linux-ld: section .got [000000008001cbe0 -> 000000008001cbe7] overlaps section .data [000000008001cbe0 -> 000000008001dcdf]
/home/cross/tools/bin/sh-linux-ld: section .got.plt [000000008001cbe8 -> 000000008001cbf3] overlaps section .data [000000008001cbe0 -> 000000008001dcdf]
collect2: ld returned 1 exit status
make[1]: *** [/opt/sh-redboot/install/bin/redboot.elf] Error 1
make[1]: Leaving directory `/opt/sh-redboot/redboot/current'
make: *** [build] Error 2


when i give sh-linux-ld --verbose , this is the result

GNU ld version 2.13.2
Supported emulations:
shlelf_linux
shelf_linux
using internal linker script:
==================================================
/* Script for -z combreloc: combine and sort reloc sections */
OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux",
"elf32-sh-linux")
OUTPUT_ARCH(sh)
ENTRY(_start)
SEARCH_DIR("/home/cross/tools//sh-linux/lib");
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = 0x400000 + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rel.dyn :
{
*(.rel.init)
*(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
*(.rel.fini)
*(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
*(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
*(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
*(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
*(.rel.ctors)
*(.rel.dtors)
*(.rel.got)
*(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
*(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
*(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
*(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
*(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
}
.rela.dyn :
{
*(.rela.init)
*(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
*(.rela.fini)
*(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
*(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
*(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
*(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
*(.rela.ctors)
*(.rela.dtors)
*(.rela.got)
*(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
*(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
*(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
*(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
*(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
}
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init :
{
KEEP (*(.init))
} =0
.plt : { *(.plt) }
.text :
{
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
} =0
.fini :
{
KEEP (*(.fini))
} =0
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
.rodata1 : { *(.rodata1) }
.sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
.sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
. = ALIGN(0x10000) + (. & (0x10000 - 1));
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
PROVIDE (__preinit_array_start = .);
.preinit_array : { *(.preinit_array) }
PROVIDE (__preinit_array_end = .);
PROVIDE (__init_array_start = .);
.init_array : { *(.init_array) }
PROVIDE (__init_array_end = .);
PROVIDE (__fini_array_start = .);
.fini_array : { *(.fini_array) }
PROVIDE (__fini_array_end = .);
.data :
{
__data_start = . ;
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
.tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
.eh_frame : { KEEP (*(.eh_frame)) }
.gcc_except_table : { *(.gcc_except_table) }
.note.ABI-tag : { *(.note.ABI-tag) }
.dynamic : { *(.dynamic) }
.ctors :
{
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
/* We don't want to include the .ctor section from
from the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
}
.dtors :
{
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
}
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.got) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata :
{
*(.sdata .sdata.* .gnu.linkonce.s.*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.sbss :
{
PROVIDE (__sbss_start = .);
PROVIDE (___sbss_start = .);
*(.dynsbss)
*(.sbss .sbss.* .gnu.linkonce.sb.*)
*(.scommon)
PROVIDE (__sbss_end = .);
PROVIDE (___sbss_end = .);
}
.bss :
{
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(32 / 8);
}
. = ALIGN(32 / 8);
_end = .;
PROVIDE (end = .);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}


can anyone solve my problem

thanx in advance
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
tar error - 'Child returned status 1' fabio_listas Linux - Newbie 8 01-16-2011 04:16 AM
ld: cannot find -lc collect2: ld returned 1 exit status ArbuZz Linux From Scratch 3 09-27-2005 12:52 AM
lfs5.1.1 cannot find -lc collect2,returning 1 exit status keyur Linux From Scratch 0 08-17-2004 11:41 AM
konstruct error collect2: ld returned 1 exit status X2O Linux - Software 2 08-11-2004 08:48 PM
popa3d collect2: ld returned 1 exit status datapunk Linux - Software 1 01-02-2004 06:48 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 11:13 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration