I am trying to burn Knoppix to a CD. Whenever I try to burn it (I've tried three times), this happens:
Code:
[pete@l0s2 pete]$ cdrecord -v -dev=0,0,0 -speed=32 -data -pad /tmp/KNOPPIX_V3.3-2003-11-19-EN.iso
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2394336 = 2338 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 699 MB padsize: 30 KB
Total size: 803 MB (79:38.41) = 358381 sectors
Lout start: 804 MB (79:40/31) = 358381 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 1465
Starting to write CD/DVD at speed 32 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 5 of 699 MB written (fifo 98%) [buf 15%] 38.2x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 0B 05 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 0B 9D 0A 00 00 00 00 0C 09 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 2973 (valid)
cmd finished after 0.021s timeout 40s
write track data: error after 5777408 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 23.275s
Average write speed 407.1x.
Min drive buffer fill was 15%
Fixating...
Fixating time: 16.157s
cdrecord: fifo had 155 puts and 92 gets.
cdrecord: fifo was 0 times empty and 16 times full, min fill was 93%.
[pete@l0s2 pete]$
Any idea what's wrong? I've tried using different brands of CD-Rs but that didn't help.