Cd burning in mandrake 9.1

chup · 09-14-2003, 08:22 AM

does anybody know of a good program to burn an iso to a cd-r?
btw im using mandrake 9.1.
thx in advance

bigVoice · 09-14-2003, 08:55 AM

Try K3b.

I bet you already have it installed (applications --> archiving --> CD bruning -- K3b). I've always had really good luck with it. You'll (obviously) want to run the K3b setup program first. It'll configure a new user group on your system that will allow non-root users (ie: you) to use the CD burner.

G'luck!

VorlonInfoTech · 09-14-2003, 09:01 AM

I prefer gtoaster. The interface is pretty simple and you just drag the files you want to record into the correct window. CDBakeOven is also nice.

chup · 09-14-2003, 12:48 PM

argh, cdrecord seems to have an error:

Quote:

$ cdrecord dev=0,0,0 speed=4 -pad -v -eject KNOPPIX_V3.2-2003-09-05-EN.iso
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'IDE-CD '
Identifikation : 'R/RW 4x4x32 '
Revision : '1.4B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET RAW/R16
Drive buf size : 1572864 = 1536 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 694 MB padsize: 30 KB
Total size: 797 MB (78:58.93) = 355420 sectors
Lout start: 797 MB (79:00/70) = 355420 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 4425
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 694 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 5D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 40 5D 13 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 16477 (valid)
cmd finished after 7.916s timeout 40s

write track data: error after 190464 bytes
Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00
Writing time: 29.873s
Average write speed 230.8x.
Fixating...
Fixating time: 44.441s
cdrecord: fifo had 67 puts and 4 gets.
cdrecord: fifo was 0 times empty and 3 times full, min fill was 98%.
[annemarie@localhost Documents]$ cdrecord dev=0,0,0 speed=1 -pad -v -eject KNOPPIX_V3.2-2003-09-05-EN.iso
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'IDE-CD '
Identifikation : 'R/RW 4x4x32 '
Revision : '1.4B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET RAW/R16
Drive buf size : 1572864 = 1536 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 694 MB padsize: 30 KB
Total size: 797 MB (78:58.93) = 355420 sectors
Lout start: 797 MB (79:00/70) = 355420 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 4425
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 240s
Writing time: 10.338s
Average write speed 999.0x.
Fixating...
Fixating time: 0.003s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

anybody got any idea on how to fix this/still be able to burn cds?