Hey guys,
I can see a fan from "sensors" output, but I can't figure out how to control it:
Code:
monster uguru # sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.46 V (min = +0.00 V, max = +0.00 V) ALARM
VCore 2: +2.83 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.15 V (min = +3.14 V, max = +3.47 V)
+5V: +5.03 V (min = +4.76 V, max = +5.24 V)
+12V: +11.98 V (min = +10.82 V, max = +13.19 V)
-12V: -7.67 V (min = -13.18 V, max = -10.80 V) ALARM
-5V: -2.89 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.51 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.31 V (min = +2.40 V, max = +3.60 V)
fan1: 1081 RPM (min = 332 RPM, div = 16)
fan2: 0 RPM (min = 332 RPM, div = 16) ALARM
fan3: 1023 RPM (min = 332 RPM, div = 16) ALARM
temp1: +32 C (high = +88 C, hyst = -89 C) sensor = thermistor
temp2: +53.0 C (high = +70 C, hyst = +65 C) sensor = diode
temp3: +47.5 C (high = +70 C, hyst = +65 C) sensor = thermistor
vid: +0.000 V (VRM Version 9.0)
alarms:
beep_enable:
Sound alarm enabled
It's fan3 ... when i do "pwmconfig", it stops and starts my CPU fan and northbridge fan and configures them as pwm1 and pwm2 respectively. However pwmconfig does not find fan3 at all.
fan1 is the CPU fan, fan2 I have no clue what it is, fan3 is my fan I want to control somehow... my northbridge fan doesn't seem to be listed.
I'd greatly appreciate any help.
Thanks!
George