Hi all, need help!
this is the actual situation:
root@bestione:/home/sathia# uname -r
Linux distribution:
Slackware
root@bestione:/home/sathia# lspci -vv
Code:
00:0d.0 Multimedia controller: Philips Semiconductors SAA7133 Video
Broadcast Decoder (rev f0)
Subsystem: ASUSTeK Computer Inc.: Unknown device 4845
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9c00000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
root@bestione:/home/sathia# lsmod
Code:
Module Size Used by
tuner 36968 0
saa7134 109140 0
bttv 157392 0
i2c_algo_bit 9288 1 bttv
btcx_risc 4360 1 bttv
tveeprom 10896 1 bttv
tda9887 12496 0
video_buf 18116 2 saa7134,bttv
v4l2_common 5184 0
i2c_core 18048 6 tuner,saa7134,bttv,i2c_algo_bit,tveeprom,tda9887
ir_common 7300 1 saa7134
nvidia 3709032 12
i think that my card is reachable by modprobe saa7134 card=25
from dmesg:
Code:
saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7133 [card=25,insmod option]
or card=53
Code:
saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,insmod option]
anyway, i wrote this little script but i had no success:
Code:
#/bin/sh
MAXTUNER=66
i=1
while [ $i -lt $MAXTUNER ];
do
rmmod saa7134 tuner
modprobe saa7134 card=25 tuner=$i
dmesg
echo "Actual tuner is:" $i
tvtime
i=$(($i+1))
done
all i get is a "no signal" from tvtime or tvtime-scanner, i ran this
script with card=25 and card=53, can anybody help me?
thank you very much
