LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 10-05-2003, 11:39 AM   #1
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Rep: Reputation: 0
america's army error


hello

can someone tell me why i get an error?

after installing america's army i tried to run it but i got this error:

armyops
bash-2.05b# sh ./armyops
open /dev/[sound/]dsp: Device or resource busy
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Couldn't set video mode: Couldn't find matching GLX visual


History:

Exiting due to error


Can someone help me on this please...


(BTW: i did install nvidia-kernel en glx, and i run gentoo linux (kernel 2.4.3))
 
Old 10-05-2003, 11:56 AM   #2
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Original Poster
Rep: Reputation: 0
My config file

Delete some stuff to save up some space

Last edited by persia; 10-05-2003 at 03:43 PM.
 
Old 10-05-2003, 12:18 PM   #3
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
Two little errors that I can see. First, if you've installed Nvidia Drivers, substitute this:

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nv"

for this

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"

You should get a nvidia splash screen next time you restart the X server. Also, remove the hash symbol at the end of Dri section:

Section "DRI"
Group 0
Mode 0666
EndSection

That would do the trick. I guess
 
Old 10-05-2003, 12:20 PM   #4
MadNewbie
Member
 
Registered: Jun 2003
Posts: 31

Rep: Reputation: 15
Do you get the nvidia splash screen when you start x?

Anyway been a while since I installed my video drivers, but i believe you should change(under section "device")

Driver "nv"

to

Driver "nvidia"


----------------

Looks like Megaman beat me to the reply

Last edited by MadNewbie; 10-05-2003 at 12:21 PM.
 
Old 10-05-2003, 12:24 PM   #5
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
For one minute only Nice timing btw
 
Old 10-05-2003, 12:54 PM   #6
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Original Poster
Rep: Reputation: 0
Yes it works

Hi Mega Man X and Madnewbie

thank you both! IT WORKS

I changed the NV into Nvidia and i got the splash screen, cool!


But still have 2 questions left:

1--> i still dont have sound
2--> How do i enable TV-OUT?

Thanks again
 
Old 10-05-2003, 01:06 PM   #7
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
Cool, I hope I can also help a friend of mine in the forum with a similar problem . Well

1) For the sound, you have to check if your distribution has a tool for it. Redhat has the good sndconfig (simply type it on the console, or install the package if it returns an error). However, if you are using a distro as Slackware, you will have to load the right module (or compile the right one into the kernel). For example, I've a laptop 166 mhz with an inbuild sound card 100% Sound Blaster Compatible. To enable sound in Slackware, I've to simply do this at the terminal:

modprobe sb

as root. Try findingh first if your distro has tools and if you card is supported. If your distro don't have the tools, try finding your modules on google .

2) To enable TV-Out it's necessary to add a couple of lines into your /etc/X11/XF86Config at Section "Device"

Code:
        Option	    "Rotate" "off"
	Option	    "TwinView" "true"
	Option	    "SecondMonitorHorizSync" "30-50"
	Option	    "SecondMonitorVertRefresh" "60"
	Option	    "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480"
	Option	    "TVStandard" "Pal-B"
	Option	    "ConnectedMonitor" "CRT,TV"
	Option	    "TwinViewOrientation" "Clone"
	Option	    "TVOutFormat" "SVIDEO"
Somethings to keep in mind though. The line Option "MetaModes"has to be kept in pairs as described at Nvidias docs. The line Option "TVStandard" "Pal-B" as you see, is set to Pal-B, system color used in a big part of Europe, including Sweden. Some countries as US and Japan uses NTSC. There are many different ones as Pal-m on South America, Pal-G on central Europe and so on. Set the one your TV handles .

To sum up, the line Option "TVOutFormat" "SVIDEO" is also referent to your TV-Out. Here we use a cable called Scart, so SVIDEO is the one I've to use. You may need also to change that to Option "TVOutFormat" "Composite" (not sure if it's right though) depending of your TV/Country/TVOutFormat.

Good luck!

Last edited by Mega Man X; 10-05-2003 at 01:21 PM.
 
Old 10-05-2003, 02:01 PM   #8
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Original Poster
Rep: Reputation: 0
Where?

Hello

Quote:
To enable TV-Out it's necessary to add a couple of lines into your /etc/X11/XF86Config at Section "Device"
1--> Where exactly do you mean ?

2--> In windows i turn on the the TV-OUT and zap to channel 0. After i pasted the text into the XF86config file i should zap to channel 0 again, and then ..... how do i enable TV-out ? With which command ? or does it do that automatically?

Sound: I use gentoo linux. and i have installed ALSA drivers but no luck till now.
 
Old 10-05-2003, 02:28 PM   #9
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
Hi again persia!!!

The way you did on windows, changing the TV to channel 0 is the same. The only difference is that you don't have to click on anything. If you have image at the monitor, you have image at the TV. It's automatically. The line "CloneView" is the responsable for it.

You to add those lines at your Section "Device", located at your /etc/X11/XF86Config

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 4 (generic)"
Option "Rotate" "off"
Option "TwinView" "true"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480"
Option "TVStandard" "Pal-B"

Here is yours:

# Device configured by xf86config:

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nv"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

Add those lines before the "EndSection and it should work. I hope
Option "ConnectedMonitor" "CRT,TV"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "SVIDEO"
EndSection
 
Old 10-05-2003, 03:41 PM   #10
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Original Poster
Rep: Reputation: 0
No view at all !

Hello i tried what you said but now i got ONLY tv-out

Here is what i did

# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/input/mice"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-107

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 48-120

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate

Option "Rotate" "off"
Option "TwinView" "true"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480"
Option "TVStandard" "Pal-B"
Option "ConnectedMonitor" "CRT,TV"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "SVIDEO"

EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "My Monitor"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection

Last edited by persia; 10-05-2003 at 03:46 PM.
 
Old 10-05-2003, 04:20 PM   #11
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
I don't see anything wrong right away. I'll put my file here, check to see if you can find any thing in mine that is not in yours. P.S: They cannot look exactly the same, not even try to do so . The point is to check better for the lines:


Code:
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
#	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "se"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Samsung Samtron 75(M)E (Plus)"
	DisplaySize  320	240
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVIDIA GeForce 4 (generic)"
	Option	    "Rotate" "off"
	Option	    "TwinView" "true"
	Option	    "SecondMonitorHorizSync" "30-50"
	Option	    "SecondMonitorVertRefresh" "60"
	Option	    "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480"
	Option	    "TVStandard" "Pal-B"
	Option	    "ConnectedMonitor" "CRT,TV"
	Option	    "TwinViewOrientation" "Clone"
	Option	    "TVOutFormat" "SVIDEO"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection
 
Old 10-05-2003, 04:44 PM   #12
persia
LQ Newbie
 
Registered: Oct 2003
Posts: 9

Original Poster
Rep: Reputation: 0
hmmm

Hi

i ve checked everything but everything seems to be ok. I have no idea ..........

Anyone an idea what is going on here ?


Thanks you all.

mega man thank you for the info
 
Old 10-05-2003, 04:57 PM   #13
Mega Man X
LQ Guru
 
Registered: Apr 2003
Location: ~
Distribution: Ubuntu, FreeBSD, Solaris, DSL
Posts: 5,339

Rep: Reputation: 65
No problems, you are welcome. Let's hope somebody can find out what is missing. I also don't see anything wrong and I've read it for like 10x now
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
America's Army jb_za Linux - Software 5 09-03-2005 04:03 PM
error in running America's Army sunnysharma Linux - Games 5 03-10-2005 11:02 AM
America's Army error cheater1034 Linux - Games 3 08-17-2004 10:41 AM
America's Army AGilley007 Mandriva 4 07-15-2004 04:39 PM
America's Army Help FXRS Linux - Software 1 07-08-2003 10:00 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 11:41 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration