cdrecord errors
helo iv used cdrecord command succesfully lots of times now but recently iv not been able to i keep getting this error [root@master wav]# cdrecord -pad dev=0,0,0 -audio *.wav
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'ATAPI ' Identifikation : 'CD-RW 52XMax ' Revision : '150D' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO RAW/R96R cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 15.774s timeout 40s cdrecord: Drive needs to reload the media to return to proper status. Starting to write CD/DVD at speed 52 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 240s i would appreciate any help on this matter thank you |
I think there is something wrong with the tracks you have provided. Probably they are not in the correct format or not in the directory. Check for permissions also.
Also try reducing the speed to something like 16x or 8x (probably because your cd doesnt support high speed writing) |
cdrecord
hello its me again master thats a joke aint it ok what i have done now is iv checked the permisions they are fine now i typed "cdrecord -pad speed=24 dev=0,0,0 -audio *.wav
you will notice this time i have told it what speed to use, the error message i get still seems to be the same [root@master wav]# cdrecord -pad speed=24 dev=0,0,0 -audio *.wav Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'ATAPI ' Identifikation : 'CD-RW 52XMax ' Revision : '150D' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO RAW/R96R cdrecord: Drive needs to reload the media to return to proper status. Starting to write CD/DVD at speed 52 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 240s [root@master wav]# now why is it that if you look at the feedback it says Starting to write CD/DVD at speed 52 if iv told it to use 24 im just stabing in the dark any more help appreciated thanks for your help seidren |
oops sorry thought i would just say i did check they were all in the wav format
|
GOD!!! This is really weird. (I wasnt joking ;))
The only final reason I can come up with for this to happen is that the cd is screwed up. Try a new cd if you can. (Are you using a CD-RW?) I also noticed this Quote:
Also check if you are running the program Autorun. Do a Code:
ps -A x Code:
kill -9 <pid> If you still get the problem. I would gladly suggest you to give a try with K3B. Its the best cdwriting frontend ever. Let me know of your progress |
hello me again ok i opend a terminal and typed
ps -A x the feedback i got was ps -A x PID TTY STAT TIME COMMAND 1 ? S 0:04 init 2 ? SW 0:00 [keventd] 3 ? SW 0:00 [kapmd] 4 ? SWN 0:00 [ksoftirqd_CPU0] 9 ? SW 0:00 [bdflush] 5 ? SW 0:00 [kswapd] 6 ? SW 0:00 [kscand/DMA] 7 ? SW 0:02 [kscand/Normal] 8 ? SW 0:00 [kscand/HighMem] 10 ? SW 0:00 [kupdated] 11 ? SW 0:00 [mdrecoveryd] 15 ? SW 0:00 [kjournald] 72 ? SW 0:00 [khubd] 776 ? SW 0:00 [kjournald] 1181 ? S 0:00 /sbin/dhclient -1 -q -lf /var/lib/dhcp/dhclient-eth0.leases -pf /var/run/dh 1259 ? S 0:05 syslogd -m 0 1263 ? S 0:02 klogd -x 1281 ? SW 0:00 [portmap] 1316 ? S 0:00 /usr/sbin/apmd -p 10 -w 5 -W -P /etc/sysconfig/apm-scripts/apmscript 1354 ? S 0:00 /usr/sbin/snmpd -s -l /dev/null -P /var/run/snmpd -a 1363 ? R 0:03 /usr/sbin/snmptrapd -s -u /var/run/snmptrapd.pid 1388 ? S 0:00 [TUX date] 1389 ? SW 0:00 [TUX logger] 1390 ? S 0:00 [TUX manager] 1391 ? S 0:00 [TUX worker 0] 1392 ? S 0:00 [async IO 0/1] 1393 ? S 0:00 [async IO 0/2] 1394 ? S 0:00 [async IO 0/3] 1395 ? S 0:00 [async IO 0/4] 1396 ? S 0:00 [async IO 0/5] 1397 ? S 0:00 [async IO 0/6] 1398 ? S 0:00 [async IO 0/7] 1399 ? S 0:00 [async IO 0/8] 1400 ? S 0:00 [async IO 0/9] 1401 ? S 0:00 [async IO 0/10] 1402 ? S 0:00 [async IO 0/11] 1403 ? S 0:00 [async IO 0/12] 1404 ? S 0:00 [async IO 0/13] 1405 ? S 0:00 [async IO 0/14] 1406 ? S 0:00 [async IO 0/15] 1407 ? S 0:00 [async IO 0/16] 1408 ? S 0:00 [async IO 0/17] 1409 ? S 0:00 [async IO 0/18] 1410 ? S 0:00 [async IO 0/19] 1411 ? S 0:00 [async IO 0/20] 1412 ? S 0:00 [async IO 0/21] 1413 ? S 0:00 [async IO 0/22] 1414 ? S 0:00 [async IO 0/23] 1415 ? S 0:00 [async IO 0/24] 1416 ? S 0:00 [async IO 0/25] 1417 ? S 0:00 [async IO 0/26] 1418 ? S 0:00 [async IO 0/27] 1419 ? S 0:00 [async IO 0/28] 1420 ? S 0:00 [async IO 0/29] 1421 ? S 0:00 [async IO 0/30] 1422 ? S 0:00 [async IO 0/31] 1423 ? S 0:00 [async IO 0/32] 1436 ? S 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid 1455 ? S 0:00 [sendmail] 1464 ? S 0:00 [sendmail] 1474 ? S 0:00 /usr/bin/spamd -d -c -a 1483 ? S 0:00 gpm -t ps/2 -m /dev/psaux 1502 ? S 0:00 crond 1513 ? S 0:00 cupsd 1543 ? S 0:00 /usr/bin/perl /usr/lib/cups/filter/cupsomatic 1 master (stdin) 1 cpi=12 lpi 1544 ? R 0:03 parallel:/dev/lp0 1 master (stdin) 1 cpi=12 lpi=7 page-bottom=36 page-left= 1558 ? S 0:00 sh -c gs '-dPARANOIDSAFER' '-dBATCH' '-dNOPAUSE' '-sOutputFile=/dev/fd/3' ' 1560 ? S 0:00 gs -dPARANOIDSAFER -dBATCH -dNOPAUSE -sOutputFile=/dev/fd/3 -sDEVICE=omni - 1574 ? S 0:03 [xfs] 1583 ? S 0:00 /usr/bin/lisa --config=/etc/lisarc 1601 ? S 0:00 [atd] 1627 ? S 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd/mux -a shadow 1641 ? S 0:00 rhnsd --interval 240 1656 tty1 S 0:00 /sbin/mingetty tty1 1657 tty2 S 0:00 /sbin/mingetty tty2 1658 tty3 S 0:00 /sbin/mingetty tty3 1659 tty4 S 0:00 /sbin/mingetty tty4 1660 tty5 S 0:00 /sbin/mingetty tty5 1661 tty6 S 0:00 /sbin/mingetty tty6 1662 ? SW 0:00 [gdm-binary] 1705 ? S 0:00 [gdm-binary] 1816 ? S 0:00 oafd --ac-activate --ior-output-fd=10 2173 ? R 2:05 /usr/X11R6/bin/X :0 -auth /var/gdm/:0.Xauth vt7 2182 ? S 0:00 /bin/sh /usr/bin/startkde 2225 ? S 0:00 /usr/bin/ssh-agent /usr/share/apps/switchdesk/Xclients.kde 2267 ? S 0:00 kdeinit: Running... 2270 ? S 0:00 kdeinit: dcopserver --nosid 2273 ? S 0:00 kdeinit: klauncher 2275 ? S 0:01 kdeinit: kded 2289 ? R 0:04 /usr/bin/artsd -F 10 -S 4096 -s 60 -m artsmessage -l 3 -f 2291 ? S 0:00 kdeinit: knotify 2292 ? S 0:00 kwrapper ksmserver 2294 ? S 0:00 kdeinit: ksmserver 2295 ? S 0:06 kdeinit: kwin -session 117f000001000107625475400000176840000_1081715985_454 2297 ? R 0:04 kdeinit: kdesktop 2299 ? S 0:10 kdeinit: kicker 2301 ? S 0:03 /usr/bin/autorun -l --interval=1000 --cdplayer=/usr/bin/kscd 2305 ? S 0:00 kdeinit: kwrited 2306 ? S 0:00 /usr/bin/pam-panel-icon --sm-client-id 117f00000100010762547600000017684000 2307 ? S 0:00 [pam_timestamp_c] 2308 ? S 0:00 gnomecc-single-shell --sm-config-prefix /gnomecc-single-shell-VtBuQk/ --sm- 2310 ? S 0:00 gnome-name-service 2313 ? S 0:02 kdeinit: kmix -session 117f000001000107675426400000179440015_1081715984_520 2314 ? S 0:00 nspluginviewer -session 117f000001000107921125700000037710025_1081715984_72 2322 ? S 0:00 kalarmd --login 2548 ? S 0:00 kdeinit: kio_file file /tmp/ksocket-master/klauncherv2nepa.slave-socket /tm 2551 ? S 0:00 kdeinit: kio_uiserver 2961 ? S 0:00 wombat --oaf-activate-iid=OAFIID:Bonobo_Moniker_wombat_Factory --oaf-ior-fd 2970 ? S 0:00 bonobo-moniker-xmldb --oaf-activate-iid=OAFIID:Bonobo_Moniker_xmldb_Factory 3017 ? S 0:00 evolution-alarm-notify --oaf-activate-iid=OAFIID:GNOME_Evolution_Calendar_A 3408 ? S 0:01 kdeinit: konsole 3409 pts/1 S 0:00 /bin/bash 3473 ? S 0:15 /usr/lib/mozilla-1.4.2/mozilla-bin -UILocale en-US 3508 ? S 0:00 esd -terminate -nobeeps -as 2 -spawnfd 30 3539 pts/1 R 0:00 ps -A x now i can only see the 1 autorun there on line 2301 so i then typed kill -2301 <pid> the feed back was ash: syntax error near unexpected token `newline' allso im using cdr not w ihave tried using a different cd but i get the same error |
no no you are supposed to type...
kill -9 2301 -9 is the signal and 2301 is the process id. |
All times are GMT -5. The time now is 09:50 PM. |