im going nuts....

need help. please read
Lan 192.168.50.0/24 /-------Pc2
(internet)>----ServerCentos----<switch>----Pc1 gw is the server
192.168.50.98 \-------Pc3

ok thats my lan i need to do this..

Centos y conected to a vpn which priv ip is 192.168.100.0
the thing is centos can conncet and ping host on the 192.168.100.0
i need 192.168.50.0 to ping 192.168.100.0
i enable ip forwarding
check ip tables
and check my estatic routes, but still cant route pack.

why?

uh..netmask 255.255.0.0? what do i win?

Provide me the output of the following commands from your centos box:-

ifconfig
netstat -nr
sysctl -p

Thanks,
Mohona.

you cannot ping anything, because the machine from 192.168.100.0 subnet simply does not "knows" where to send answers.

the simplest way when you're administrator only in subnet 192.168.50.0 is to do address translation
iptables -t nat -A POSTROUTUNG -d 192.168.100.0/24 -j SNAT --to-source 192.168.100.X
192.168.100.X - corresponding ip-address of your CentOS router

the other way (when you'ra administrator in 192.168.100.0 too): to make your CentOS default router or on your default router create static route to subnet 192.168.50.0/24 using gateway 192.168.100.X

third way is to specify route to subnet 192.168.50.0 via 192.168.100.X on each machine in subnet 192.168.100.0 (manually or via DHCP)

in response

eth1 Link encap:Ethernet HWaddr 00:A0:C97:1AE
inet addr:192.168.50.98 Bcast:192.168.50.255 Mask:255.255.255.0
inet6 addr: fe80::2a0:c9ff:fed7:1ade/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:18660 errors:2 dropped:0 overruns:0 frame:2
TX packets:6207 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1799438 (1.7 MiB) TX bytes:1813295 (1.7 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2993 errors:0 dropped:0 overruns:0 frame:0
TX packets:2993 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:309405 (302.1 KiB) TX bytes:309405 (302.1 KiB)

tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:192.168.100.164 P-t-P:192.168.100.164 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1412 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:36 (36.0 b) TX bytes:64 (64.0



Kernel IP routing

table
Destination Gateway Genmask Flags MSS Window irtt Iface
92.198.46.70 192.168.50.1 255.255.255.255 UGH 1500 0 0 eth1
192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.50.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.115.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.30.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.200.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
10.100.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.105.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.25.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
10.100.3.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 192.168.50.1 0.0.0.0 UG 0 0 0 eth1
b)



sysctl -p
net.ipv4.ip_forward = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
net.ipv4.conf.default.rp_filter = 1
kernel.sysrq = 0
net.ipv4.conf.default.accept_source_route = 0
kernel.shmall = 268435456
net.ipv4.tcp_syncookies = 1
kernel.core_uses_pid = 1



im gonna try pv's way but there is the info u ask in case of.

thx the nat work just fine.