Hi all,
I've built my first nas and have transferred files for the 1st time.
I was using IPtraf to check my transfer speed but I must be doing the math wrong. I keep getting .5MB/s but that can't be right. Please look @ my builds and the screenshot and help me out. What was my transfer speed in the pic?
Thanks to all
NASbox - Freenas 8.3
GIGABYTE GA-G41MT-S2PT LGA 775 Intel G41 Micro ATX
C2D E6400
Rosewill RC-209-EX PCI 2.3, 32bit, 33/66Mhz SATA Controller Card (not using yet)
Western Digital Red WD20EFRX 2TB IntelliPower SATA 6.0Gb/s 3.5"
2x Seagate Momentus XT ST95005620AS 500GB 7200 RPM 2.5" SATA 3.0Gb/s with NCQ Solid State Hybrid Drive (Mirrored)
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666)
Os on a PNY 8GB flash that reads around 15MB/s
Client: XBMC Machine (eventually)
ASRock H67M-ITX LGA 1155 Intel H67 HDMI SATA 6Gb/s USB 3.0 Mini ITX Intel Motherboard
i3 2100
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666)
transferring off a 64GB patriot flash that hdparm reports @ 16MB/s
Os is on a Corsair Voyager 16GB Hdparm reports @ 34MB/s
Damn can't get it to show up. Please follow the link for the Screen shot.
http://img338.imageshack.us/img338/2739/iptraf.png
Uploaded with
ImageShack.us
