junust |
12-29-2009 03:54 AM |
LTSP usb keyboard and usb mouce recognize
Hello
I got ltsp 4.2 installed on my CentOS 4.4 based server
all client are fin PC stations
lts.conf
Code:
[Default]
SERVER = 192.168.0.1
XSERVER = auto
X_MOUSE_PROTOCOL = "IMPS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
SCREEN_01 = "rdesktop -x b -N -a 16 -f 192.168.0.2"
XKBLAYOUT = "he,us"
SCREEN_02 = shell
The problem is, if I want to connect usb keyboard or usb mouse instead of PS/2 (In the rest of of this post I am trying to this to PC station with MAC address [00:11:25:84:CE:BA] ) it doesn't recognized by the system when a client connects to 192.168.0.2 windows based terminal server
So I know that is some like this configuration could be used in my lts.conf, but I am not sure this is the way it should be done, in addition, there is a per thin client settings could be used if I spesifie based on MAC address clients some thing like [00:11:25:84:CE:BA] in lts.conf
Code:
MODULE_01 = usb-uhci
MODULE_02 = usbmouse
MODULE_03 = mousedev
MODULE_04 = usbkbd
MODULE_05 = keybdev
X_MOUSE_DEVICE = "/dev/input/mice"
X_MOUSE_PROTOCOL = "IMPS/2"
So, the main config is something like?
Code:
[00:11:25:84:CE:BA]
SERVER = 192.168.0.1
XSERVER = auto
MODULE_01 = usb-uhci
MODULE_02 = usbmouse
MODULE_03 = mousedev
MODULE_04 = usbkbd
MODULE_05 = keybdev
X_MOUSE_DEVICE = "/dev/input/mice"
X_MOUSE_PROTOCOL = "IMPS/2"
USE_XFS = N
SCREEN_01 = "rdesktop -x b -N -a 16 -f 192.168.0.2
XKBLAYOUT = "he,us"
SCREEN_02 = shell
[Default]
SERVER = 192.168.0.1
XSERVER = auto
X_MOUSE_PROTOCOL = "IMPS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
SCREEN_01 = "rdesktop -x b -N -a 16 -f 192.168.0.2"
XKBLAYOUT = "he,us"
SCREEN_02 = shell
I put my MAC address based client [00:11:25:84:CE:BA],in the first place before [Default] section will be applied
Is this the right way to do this??
|