Hello, I need if possible and if someone has the keyboard Genius Slimstart 320 the output of lsusb -vvv -d XXXX:YYYY where XXXX and YYYY are the VENDOR_ID and MODEL_ID.
Example:
Code:
lsusb
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
lsusb -vvv -d 0a5c:5801
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x5801 BCM5880 Secure Applications Processor with fingerprint swipe sensor
bcdDevice 1.01
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 139
bNumInterfaces 2
bConfigurationValue 0
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4
** UNRECOGNIZED: 10 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 9600 bps
dwMaxDataRate 250000 bps
bNumDataRatesSupp. 0
dwMaxIFSD 247
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 000102BA
Auto configuration based on ATR
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
NAD value other than 0x00 accpeted
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Thanks!
