-   Linux - Server (
-   -   Installation problem in CentOS 5.2 ? (

openSourceLover 10-18-2009 04:52 AM

Installation problem in CentOS 5.2 ?
2 Attachment(s)
I don't be able to install CentOS on ASUS server with SATA hard disk because of this message

Select device Driver to load

I put images for this problem in attachments please see them
thanks for all

scottro11 10-18-2009 04:13 PM

You might try CentOS 5.3, which is more readily available now. (I don't know if it will have the same problem or not)

openSourceLover 10-19-2009 03:48 AM

ok ..
but I try centOS 5.2 too
and the same problem do you think I've to try older!!

openSourceLover 10-23-2009 04:11 AM

No solution for my problem


okcomputer44 10-23-2009 08:26 AM


you have to select the muss storage driver for your sata hardware.

Check your driver disk for linux driver and copy it to an fdd after that you can add that driver to recognise it by the system.

Same thing happens when you have an external usb DVD as well as an internal. And you boot from the external dvd and the installer start to search the disk image at the internal hardware.

I had to remove the internal CD-ROM in my proliant server. The CentOS installer started to loading the disk image from the CD-ROM even if I booted from the external USB DVD.

Anyway try to select Sata mass storgae drivers from the list or use just one physical media to install the system.

It might help.


All times are GMT -5. The time now is 02:43 AM.