|
HW RAID : Firmware state: Failed
Hello,
I got this output while I checked drives status in RAID "LSI RAID card"
Adapter #0
===
[root@hostname ~]# MegaCli64 -PDList -aALL
=====
Enclosure Device ID: 252
Slot Number: 0
Drive's postion: DiskGroup: 0, Span: 0, Arm: 4
Enclosure position: 0
Device Id: 13
WWN:
Sequence Number: 3
Media Error Count: 856
Other Error Count: 1899
Predictive Failure Count: 112
Last Predictive Failure Event Seq Number: 95748
PD Type: SATA
Raw Size: 931.512 GB [0x74706db0 Sectors]
Non Coerced Size: 931.012 GB [0x74606db0 Sectors]
Coerced Size: 931.0 GB [0x74600000 Sectors]
Firmware state: Failed
Device Firmware Level: CC38
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221103000000
Connected Port Number: 6(path0)
Inquiry Data:
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 3.0Gb/s
Link Speed: 3.0Gb/s
Media Type: Hard Disk Device
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Drive's write cache : Disabled
Port-0 :
Port status: Active
Port's Linkspeed: 3.0Gb/s
Drive has flagged a S.M.A.R.T alert : Yes
===
Should I replace this drive with new one nor there is a way to fix it ?
Last edited by linux2man; 03-24-2013 at 05:52 PM.
Reason: Format
|
