hello

i have a problem to etablish a connection ppp between a windows ppp and linux ppp.i create one distant connection with the setting of new connection distant. The client ppp is on the terminal server on linux. when the PC windows xp calls the terminal server linux, the terminal sends the strange caracters. as loginpassw#)+£#+). it don't allow me to identify, and the connection ppp doesn't etablish, i don't what do i do.

Thank you very much for your answer

Are you really trying to connect the two boxes through a PHONE line? If that's the case, make sure both endpoints use PAP authentication (see man pppd, you probably need to configure /etc/ppp/pap-secrets)

But if you are trying to establish a connection over an IP network (creating a VPN), better use some software specifically designed to do that, like OpenVPN.

thanks you very much zirias for you answer, i use the phone line


i obtain this log

Log system

Jul 14 17:25:42 2010 slc pppd[4517]: Modem hangup
Jul 14 17:25:41 2010 slc pppd[4517]: LCP: timeout sending Config-Requests
Jul 14 17:25:41 2010 slc pppd[4517]: Connection terminated.
Jul 14 17:25:38 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:35 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:32 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:29 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:26 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:23 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:20 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:17 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:14 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:11 2010 slc pppd[4517]: using channel 10
Jul 14 17:25:11 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:11 2010 slc pppd[4517]: Using interface ppp49
Jul 14 17:25:11 2010 slc pppd[4517]: Connect: ppp49 <--> /dev/ttyS0

Audit log


Jul 14 17:25:42 2010 slc pppd[4517]: Modem hangup
Jul 14 17:25:41 2010 slc pppd[4517]: LCP: timeout sending Config-Requests
Jul 14 17:25:41 2010 slc pppd[4517]: Connection terminated.
Jul 14 17:25:38 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:35 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:32 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:29 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:26 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:23 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:20 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:17 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:14 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:11 2010 slc pppd[4517]: using channel 10
Jul 14 17:25:11 2010 slc pppd[4517]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x2327c946> <pcomp> <accomp>]
Jul 14 17:25:11 2010 slc pppd[4517]: Using interface ppp49
Jul 14 17:25:11 2010 slc pppd[4517]: Connect: ppp49 <--> /dev/ttyS0

Modem log

Modem Log

07/14 17:24-PCCU--- End Modem / Data Settings ---------------------------------
07/14 17:24-PCCU-Configuring serial port: 115200/N/1 rts/cts.
07/14 17:24-PCCU-Init script, sending: ~^M~AT S7=45 S0=0 L1 V1 X4 &D2 &c1 E1 Q0
07/14 17:24-PCCU-AT S7=45 S0=0 L1 V1 X4 &D2 &c1 E1 Q0
OK

07/14 17:24-PCCU-Getting modem firmware version, sending: AT+GMR
07/14 17:24-PCCU-Firmware version: Zoom V92 PC Card ACF3_V1.900M-A Z201
07/14 17:24-PCCU-Initiating Dial In, waiting for call.
07/14 17:24-PCCU-RING

07/14 17:24-PCCU-RING

07/14 17:24-PCCU-Answering call, sending: ATA
07/14 17:24-PCCU-ATA
07/14 17:25-PCCU-CONNECT 115200

07/14 17:25-PCCU-Initiating PPP.
07/14 17:25-PCCU-Initiating a PPP Dial Back connection.
07/14 17:25-PCCU--- Modem / Data Settings -------------------------------------
07/14 17:25-PCCU-Init Script:
07/14 17:25-PCCU-Timeout Logins: disabled
07/14 17:25-PCCU-Modem Timeout: disabled, Restart Delay: 30 seconds
07/14 17:25-PCCU-Auth: PAP, CHAP Host/Secret: /
07/14 17:25-PCCU-DOD Auth: CHAP, CHAP Host/Secret: armelle/*********
07/14 17:25-PCCU-Local/Remote IP: negotiate, NAT: enabled
07/14 17:25-PCCU-Dialout Login: Network_Design, Dialout Password: **********
07/14 17:25-PCCU-Dialback Number: , Dialback Delay: 10 seconds
07/14 17:25-PCCU-CBCPServer Allow No Clbk: disabled, CBCPClient Type: Admin-def
07/14 17:25-PCCU-Caller ID: enabled, Caller ID Cmd: PPPDIAG
07/14 17:25-PCCU-Baud: 115200, Data Bits: 8, Parity: none, Flow: rts/cts
07/14 17:25-PCCU--- End Modem / Data Settings ---------------------------------
07/14 17:25-PCCU-Configuring serial port: 115200/N/1 rts/cts.
07/14 17:25-PCCU-Init script, sending: ~^M~AT S7=45 S0=0 L1 V1 X4 &D2 &c1 E1 Q0
07/14 17:25-PCCU-AT S7=45 S0=0 L1 V1 X4 &D2 &c1 E1 Q0
OK

07/14 17:25-PCCU-Getting modem firmware version, sending: AT+GMR
07/14 17:25-PCCU-Firmware version: Zoom V92 PC Card ACF3_V1.900M-A Z201
07/14 17:25-PCCU-Initiating Dial In, waiting for call.

Attached Thumbnails