LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Server (https://www.linuxquestions.org/questions/linux-server-73/)
-   -   Apache 2 .htaccess (https://www.linuxquestions.org/questions/linux-server-73/apache-2-htaccess-621393/)

0.o 02-15-2008 12:08 PM

Apache 2 .htaccess
 
Hello,

I am having a slight issue with htaccess files. I have a lot of directories within a main directory. Each sub directory of the main has a htaccess file in it as does the main directory. All directories are served via one virtual host. The problem that i am having is that the server is reading the htaccess file in the main directory rather than the sub directory. Anyone have any ideas?

mtimbro 02-15-2008 01:04 PM

I know how to do it but found this example which is really good:

"You could put a .htaccess in the root of each virtual host, or you could create a subdirectory within the Apache config directory, containing a config file per vhost with the proper directives -- such as usr/local/apache2/conf/vhosts-protection. Then, in httpd.conf,
you could write

+ This means you can think of .htaccess files as dynamically adding the following to the master
Apache configuration:
- {{{
- Include /usr/local/apache2/conf/vhosts-protection/*.conf
- }}}
-
- '''/usr/local/apache2/conf/vhosts-protection/vhost-1.conf'''
- {{{
- <Directory /var/www/html/vhost-1>
- AuthType Basic
- AuthName "Authentication Required"
- AuthUserFile /etc/htpasswd/vhost-1/.htpasswd
- Require valid-user
-
- Order allow,deny
- Allow from all
- </Directory>
- }}}
-
- And so on for the rest of your virtual hosts."

0.o 02-15-2008 01:15 PM

These aren't seperate v-hosts. It is one vhost that has many subdirs each with their own .htaccess file. If i had to create a separate dir directive for them all it would take days.

cconstantine 02-15-2008 02:09 PM

my thoughts...
 
first, are you actually using apache? An earlier *reply* mentions apache, and it sounds like you're talking about apache. But, is it apache, and what version of apache?

Presuming apache (something modern like 2.x), first be aware that it is *supposed* to read the per-directory access control file (ACF) in every directory along the path to the target of the access.

So I'm going to guess you really mean that configuration options you put in the sub-dir ACF aren't being applied as you wish.

ACFs are usually named ".htaccess" or "htaccess" but that is completely configurable. First make sure you have the filename right in the sub-directories. You could have some odd server config that makes the ACF filename different in the subdirectories.

Still no luck?

Try putting an intentional mistake into one of your ACFs ... misspell something. Then access a target in that directory and your server error log should warn you of the error. This verifies that it is actually noticing and attempting to apply your ACF from that sub-directory.

At this point you should either have to figure out why isn't it reading your ACF (file permissions maybe?) or why your configuration in the ACF isn't doing what you want.

-c

0.o 02-15-2008 02:55 PM

Quote:

Originally Posted by cconstantine (Post 3058351)
first, are you actually using apache? An earlier *reply* mentions apache, and it sounds like you're talking about apache. But, is it apache, and what version of apache?

Presuming apache (something modern like 2.x), first be aware that it is *supposed* to read the per-directory access control file (ACF) in every directory along the path to the target of the access.

So I'm going to guess you really mean that configuration options you put in the sub-dir ACF aren't being applied as you wish.

ACFs are usually named ".htaccess" or "htaccess" but that is completely configurable. First make sure you have the filename right in the sub-directories. You could have some odd server config that makes the ACF filename different in the subdirectories.

Still no luck?

Try putting an intentional mistake into one of your ACFs ... misspell something. Then access a target in that directory and your server error log should warn you of the error. This verifies that it is actually noticing and attempting to apply your ACF from that sub-directory.

At this point you should either have to figure out why isn't it reading your ACF (file permissions maybe?) or why your configuration in the ACF isn't doing what you want.

-c

I am using apache 2.2.3.

The name of the file is correct. I have checked the file perms and everyone can read. I have renamed the authname of the upper most htaccess file and it will display my changes once saved. If completely remove the upper most htaccess file, it allows me access without any prompt.

The way this is setup is like this:

I have one main index page that lists a lot of different site names in clickable links. This main page is: http://site.domain.com/cgi-bin/wisp/util.fcgi/ (main htaccess in /cgi-bin/wisp) That fcgi script there parses a mrtg config with all the sites listed and generates an index from it. The clickable links that it uses are in the format of the following: http://site.domain.net/cgi-bin/wisp/util.fcgi/SITE/ where the site after the fcgi is the actual graphs. Once you click on that the fcgi script parses the config for that site and generates graphs... this is where i believe the problem exists. The directory where the graph pictures, etc. are stored are in a totally different directory structure from the fcgi script. So, the individualized htaccess files for each site are actually located in /var/www/html/wisp/SITE. This was working previously. I have attached the old httpd.conf.

cconstantine 02-15-2008 03:08 PM

per-dir ACFs and *PATH_INFO*
 
Quote:

Originally Posted by 0.o (Post 3058404)
The clickable links that it uses are in the format of the following: http://site.domain.net/cgi-bin/wisp/util.fcgi/SITE/ where the site after the fcgi is the actual graphs. Once you click on that the fcgi script parses the config for that site and generates graphs... this is where i believe the problem exists. The directory where the graph pictures, etc. are stored are in a totally different directory structure from the fcgi script. So, the individualized htaccess files for each site are actually located in /var/www/html/wisp/SITE. This was working previously. I have attached the old httpd.conf.

oh! this sheds a lot of light...

so the main(first) access is to /cgi-bin/wisp/util.fcgi and the subsequent clicks are also on that exact same target. Yes, with "/SITE" added on as PATH_INFO, but Apache is accessing the same 'util.cfgi' in the wisp directory, so only the ACF in the wisp directory applies. Apache doesn't "go into" the 'SITE' directory looking for the target object to satisfy the request -- and will therefore never care about an ACF in some other directory that your fcgi happens to look at (via it's algorithm and the given PATH_INFO.)

what config options/changes are you trying to implement in the ACFs in those SITE directories...

and I don't see your httpd conf attached (not sure that I need to read it though...)

0.o 02-15-2008 03:08 PM

Code:

ServerTokens OS

ServerRoot "/etc/httpd"

PidFile run/httpd.pid

Timeout 300

KeepAlive Off

MaxKeepAliveRequests 100

KeepAliveTimeout 15

<IfModule prefork.c>
StartServers      8
MinSpareServers    5
MaxSpareServers  20
MaxClients      150
MaxRequestsPerChild  1000
</IfModule>

<IfModule worker.c>
StartServers        2
MaxClients        150
MinSpareThreads    25
MaxSpareThreads    75
ThreadsPerChild    25
MaxRequestsPerChild  0
</IfModule>

<IfModule perchild.c>
NumServers          5
StartThreads        5
MinSpareThreads      5
MaxSpareThreads    10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
</IfModule>

Listen 80


Include conf.d/*.conf

LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule fastcgi_module modules/mod_fastcgi.so

<IfModule prefork.c>
LoadModule cgi_module modules/mod_cgi.so
</IfModule>

<IfModule worker.c>
LoadModule cgid_module modules/mod_cgid.so
</IfModule>

User apache
Group apache

ServerAdmin abuse@domain.net

ServerName srtrend2.domain.net

UseCanonicalName Off

DocumentRoot "/var/www/html"

<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

<Directory "/var/www/html">

    Options FollowSymLinks
    AllowOverride All
    Order allow,deny
    Allow from all

</Directory>

<IfModule mod_userdir.c>
    #
    # UserDir is disabled by default since it can confirm the presence
    # of a username on the system (depending on home directory
    # permissions).
    #
    UserDir disable

    #
    # To enable requests to /~user/ to serve the user's public_html
    # directory, remove the "UserDir disable" line above, and uncomment
    # the following line instead:
    #
    #UserDir public_html

</IfModule>

DirectoryIndex index.html index.html.var
AccessFileName .htaccess
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</Files>
TypesConfig /etc/mime.types

DefaultType text/plain


<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

HostnameLookups Off


ErrorLog logs/error_log

LogLevel warn

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog logs/access_log common
CustomLog logs/access_log combined

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off
ServerTokens Prod

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"

<Directory "/var/www/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
#
#Alias /manual "/var/www/manual"
#
#<Directory "/var/www/manual">
#    Options Indexes FollowSymLinks MultiViews
#    AllowOverride None
#    Order allow,deny
#    Allow from all
#</Directory>

<IfModule mod_dav_fs.c>
    # Location of the WebDAV lock database.
    DAVLockDB /var/lib/dav/lockdb
</IfModule>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
Scriptsock            run/httpd.cgid
</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride All
#    Options None
    Order allow,deny
    Allow from all
</Directory>
FastCgiIpcDir /var/www/fastcgi
FastCgiConfig -maxClassProcesses 3 -appConnTimeout 0

<IfModule mod_fastcgi.c>
    <Directory "/var/www/cgi-bin/wisp">
        AllowOverride ALL
#        Options None
        Order allow,deny
        Allow from all
#    SetHandler fastcgi-script
    AddHandler fastcgi-script fcg fcgi fpl
    Options +ExecCGI
  </Directory>
</IfModule>

<IfModule mod_fastcgi.c>
    <Directory "/var/www/cgi-bin/hsi">
        AllowOverride ALL
#        Options None
        Order allow,deny
        Allow from all
#    SetHandler fastcgi-script
    AddHandler fastcgi-script fcg fcgi fpl
    Options +ExecCGI
  </Directory>
</IfModule>

<IfModule mod_fastcgi.c>
    <Directory "/var/www/cgi-bin/fcgi">
        AllowOverride ALL
#        Options None
        Order allow,deny
        Allow from all
#    SetHandler fastcgi-script
    AddHandler fastcgi-script fcg fcgi fpl
    Options +ExecCGI
  </Directory>
</IfModule>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or standard.
# VersionSort is whether files containing version numbers should be
# compared in the natural way, so that `apache-1.3.9.tar' is placed before
# `apache-1.3.12.tar'.
#
IndexOptions FancyIndexing VersionSort NameWidth=*

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (kr)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage kr .kr
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr

LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw

ForceLanguagePriority Prefer Fallback

AddDefaultCharset ISO-8859-1

AddCharset ISO-8859-1  .iso8859-1  .latin1
AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3  .latin3
AddCharset ISO-8859-4  .iso8859-4  .latin4
AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5      .big5
AddCharset WINDOWS-1251 .cp-1251  .win-1251
AddCharset CP866      .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru    .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8      .utf8


AddCharset GB2312      .gb2312 .gb
AddCharset utf-7      .utf7
AddCharset utf-8      .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis  .sjis

AddType application/x-tar .tgz


AddHandler cgi-script .cgi

AddHandler imap-file map

AddHandler type-map var

AddOutputFilter INCLUDES .shtml

Alias /error/ "/var/www/error/"

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    <Directory "/var/www/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    ErrorDocument 410 /error/HTTP_GONE.html.var
    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>


BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0


BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully


NameVirtualHost 172.16.255.4:80



<VirtualHost 172.16.255.4:80>
    DocumentRoot /var/www/html/openwebmail
    ServerName mail.domain.net
</VirtualHost>

<VirtualHost 172.16.255.4:80>
        DocumentRoot /var/www/html
        ServerName mrtg.domain.net
</VirtualHost>

<VirtualHost 172.16.255.4:80>
    DocumentRoot /var/www/html/wisp
    ServerName trend.domain.net
</VirtualHost>


cconstantine 02-15-2008 03:16 PM

Quote:

Originally Posted by 0.o (Post 3058419)
your httpd config...

ok, your config looks generic -- I mean, nothing out of the ordinary. No obtuse files or dir matching configs.

I noticed you said it used to work... let's call it the "second tree"; where all the site dirs are. That second tree is totally out of the picture from apache's point of view. Apache looks in your cgi-bin/wisp dir for the ACF. fires up that fcgi and passes the PATH_INFO (the site specifier in your application) and sits back while the fcgi cranks out output.

What are you trying to accomplish via the per-dir ACF(s) in each SITE dir?

-c

0.o 02-15-2008 03:20 PM

Here is the new config:

Code:

ScriptAlias /cgi-bin/ /var/www/cgi-bin/

ServerRoot "/etc/apache2"
DocumentRoot "/var/www/html"
ServerName domain.net
ServerTokens Prod

#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/apache2.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers      5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild  0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75
    ThreadsPerChild      25
    MaxRequestsPerChild  0
</IfModule>

User www-data
Group www-data

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel debug

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

# Include generic snippets of statements
Include /etc/apache2/conf.d/

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Prod

#
# Optionally add a line containing the server version and virtual host
#IPTIDEJCC-GWrver-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Email

<IfModule alias_module>
    #
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/".  If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    #
    # We include the /icons/ alias for FancyIndexed directory listings.  If
    # you do not use FancyIndexing, you may comment this out.
    #
    Alias /icons/ "/var/www/icons/"

    <Directory "/var/www/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

  # Alias /cgi-bin/ "/var/www/cgi-bin/"
#
 #  <Directory "/var/www/cgi-bin">
  ##    Options +ExecCGI -Indexes Multiviews
    #  AllowOverride None
    #  Order allow,deny
    #  Allow from all
  # </Directory>

</IfModule>

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

    #
    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    #
    IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=*

    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# RCS CVS *,v *,t
</IfModule>

<IfModule mod_mime.c>

    #
    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have
    # nothing to do with the FancyIndexing customization directives above.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # DefaultLanguage and AddLanguage allows you to specify the language of
    # a document. You can then use content negotiation to give a browser a
    # file in a language the user can understand.
    #
    # Specify a default language. This means that all data
    # going out without a specific language tag (see below) will
    # be marked with this one. You probably do NOT want to set
    # this unless you are sure it is correct for all cases.
    #
    # * It is generally better to not mark a page as
    # * being a certain language than marking it with the wrong
    # * language!
    #
    # DefaultLanguage nl
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in some cases
    # the two character 'Language' abbreviation is not identical to
    # the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. There is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
    # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
    # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
    # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
    # Norwegian (no) - Polish (pl) - Portugese (pt)
    # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
    # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
    #
    AddLanguage ca .ca
    AddLanguage cs .cz .cs
    AddLanguage da .dk
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage en .en
    AddLanguage eo .eo
    AddLanguage es .es
    AddLanguage et .et
    AddLanguage fr .fr
    AddLanguage he .he
    AddLanguage hr .hr
    AddLanguage it .it
    AddLanguage ja .ja
    AddLanguage ko .ko
    AddLanguage ltz .ltz
    AddLanguage nl .nl
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddLanguage pt .pt
    AddLanguage pt-BR .pt-br
    AddLanguage ru .ru
    AddLanguage sv .sv
    AddLanguage zh-CN .zh-cn
    AddLanguage zh-TW .zh-tw
</IfModule>

<IfModule mod_negotiation.c>
    #
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

    #
    # ForceLanguagePriority allows you to serve a result page rather than
    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
    # [in case no accepted languages matched the available variants]
    #
    ForceLanguagePriority Prefer Fallback

</IfModule>

<IfModule mod_mime.c>
    #
    # Specify a default charset for all pages sent out. This is
    # always a good idea and opens the door for future internationalisation
    # of your web site, should you ever want it. Specifying it as
    # a default does little harm; as the standard dictates that a page
    # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
    # are merely stating the obvious. There are also some security
    # reasons in browsers, related to javascript and URL parsing
    # which encourage you to always set a default char set.
    #
    #AddDefaultCharset ISO-8859-1

    #
    # Commonly used filename extensions to character sets. You probably
    # want to avoid clashes with the language extensions, unless you
    # are good at carefully testing your setup after each change.
    # See http://www.iana.org/assignments/character-sets for the
    # official list of charset names and their respective RFCs.
    #
    AddCharset us-ascii    .ascii .us-ascii
    AddCharset ISO-8859-1  .iso8859-1  .latin1
    AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
    AddCharset ISO-8859-3  .iso8859-3  .latin3
    AddCharset ISO-8859-4  .iso8859-4  .latin4
    AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
    AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
    AddCharset ISO-8859-7  .iso8859-7  .grk .greek
    AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
    AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
    AddCharset ISO-8859-10  .iso8859-10  .latin6
    AddCharset ISO-8859-13  .iso8859-13
    AddCharset ISO-8859-14  .iso8859-14  .latin8
    AddCharset ISO-8859-15  .iso8859-15  .latin9
    AddCharset ISO-8859-16  .iso8859-16  .latin10
    AddCharset ISO-2022-JP .iso2022-jp .jis
    AddCharset ISO-2022-KR .iso2022-kr .kis
    AddCharset ISO-2022-CN .iso2022-cn .cis
    AddCharset Big5        .Big5      .big5 .b5
    AddCharset cn-Big5    .cn-big5
    # For russian, more than one charset is used (depends on client, mostly):
    AddCharset WINDOWS-1251 .cp-1251  .win-1251
    AddCharset CP866      .cp866
    AddCharset KOI8      .koi8
    AddCharset KOI8-E      .koi8-e
    AddCharset KOI8-r      .koi8-r .koi8-ru
    AddCharset KOI8-U      .koi8-u
    AddCharset KOI8-ru    .koi8-uk .ua
    AddCharset ISO-10646-UCS-2 .ucs2
    AddCharset ISO-10646-UCS-4 .ucs4
    AddCharset UTF-7      .utf7
    AddCharset UTF-8      .utf8
    AddCharset UTF-16      .utf16
    AddCharset UTF-16BE    .utf16be
    AddCharset UTF-16LE    .utf16le
    AddCharset UTF-32      .utf32
    AddCharset UTF-32BE    .utf32be
    AddCharset UTF-32LE    .utf32le
    AddCharset euc-cn      .euc-cn
    AddCharset euc-gb      .euc-gb
    AddCharset euc-jp      .euc-jp
    AddCharset euc-kr      .euc-kr
    #Not sure how euc-tw got in - IANA doesn't list it???
    AddCharset EUC-TW      .euc-tw
    AddCharset gb2312      .gb2312 .gb
    AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
    AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
    AddCharset shift_jis  .shift_jis .sjis

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    #
    # For files that include their own HTTP headers:
    #
    #AddHandler send-as-is asis

    #
    # For server-parsed imagemap files:
    #
    #AddHandler imap-file map

    #
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    #  to be distributed in multiple languages.)
    #
    AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#  Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#    Alias /error/ "/usr/share/apache2/error/"
#
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en cs de es fr it nl sv pt-br ro
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

<IfModule mod_setenvif.c>
    #
    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

    #
    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash.  This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
    #
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
    BrowserMatch "MS FrontPage" redirect-carefully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
    BrowserMatch "^gnome-vfs/1.0" redirect-carefully
    BrowserMatch "^XML Spy" redirect-carefully
    BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
</IfModule>

DirectoryIndex index.php index.html

NameVirtualHost *:80
#NameVirtualHost trend.domain.net


<VirtualHost *:80>

        ServerAdmin user@domain.com
        ServerName mrtg.domain.net

        DocumentRoot /var/www/html

        <Directory /var/www/html>
                Options FollowSymLinks
                AllowOverride All
        </Directory>

        ScriptAlias /cgi-bin/ /var/www/cgi-bin/

        <Directory "/var/www/cgi-bin">
                AllowOverride None
                Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
                Order allow,deny
                Allow from all
        </Directory>

        ErrorLog /var/log/apache2/mrtg-error.log
        CustomLog /var/log/apache2/mrtg-access.log common
        LogLevel warn
        ServerSignature Off
</VirtualHost>
       
<VirtualHost *:80>
        ServerAdmin user@domain.com
        ServerName  trend.domain.net

        DocumentRoot /var/www/html/wisp
       
        <Directory /var/www/html/wisp>
                Options FollowSymLinks
                AllowOverride All
        </Directory>

        ScriptAlias /cgi-bin/ /var/www/cgi-bin/

        <Directory "/var/www/cgi-bin/wisp">
                AllowOverRide All
                Options ExecCGI -Multiviews FollowSymLinks
                Order allow,deny
                Allow from all
        </Directory>

        ErrorLog /var/log/apache2/trend.error.log
        CustomLog /var/log/apache2/trend.access.log common
        LogLevel debug 
        ServerSignature Off
</VirtualHost>

<VirtualHost *:443>
        ServerAdmin user@domain.com
        ServerName srtrend2.domain.net

        SSLEngine on
        SSLCertificateFile /etc/ssl/certs/apache.pem

        DocumentRoot /var/www/html/hsi

        <Directory /var/www/html/hsi>
                Options FollowSymLinks
                AllowOverRide All
        </Directory>

        ScriptAlias /cgi-bin/ /var/www/cgi-bin/

        <Directory "/var/www/cgi-bin">
                AllowOverRide All
                Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
                Order allow,deny
                Allow from all
        </Directory>

        ErrorLog /var/log/apache2/srtrend2-error.log
        CustomLog /var/log/apache2/srtrend2-access.log common
        LogLevel warn
        ServerSignature Off
</VirtualHost>
<VirtualHost *:80>
        ServerAdmin user@domain.com
        ServerName mail.domain.net

        DocumentRoot /var/www/mail


        <Directory /var/www/mail>
                Options FollowSymLinks
                AllowOverRide All
        </Directory>

        ScriptAlias /cgi-bin/ /var/www/cgi-bin/

        <Directory "/var/www/cgi-bin">
                AllowOverRide All
                Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
                Order allow,deny
                Allow from all
        </Directory>

        ErrorLog /var/log/apache2/mail-error.log
        CustomLog /var/log/apache2/mail-access.log common
        LogLevel warn
        ServerSignature off
</VirtualHost>


0.o 02-15-2008 03:21 PM

I am trying to give each site their own user/pass to access their dir/site/graphs.

cconstantine 02-15-2008 03:32 PM

doesn't work that way...
 
Quote:

Originally Posted by 0.o (Post 3058434)
I am trying to give each site their own user/pass to access their dir/site/graphs.

oh. you can't do that...

apache will secure the single target -- that FCGI in the wisp directory. But that's it. It's just one single thing from apache point of view. The way to fix this is to implement he security in your FCGI; cookie-based login or something. But that (implementing http security) is non-trivial. Not brain surgery, but not a five-minute fix.

So, how here's a way to make it work with minimum hacking... how about this: (and this is ugly, but it would work)

Put security on the CFGI itself. Setup a pasword file with all the user/pass combos in it. Then in the FCGI, look at the USER_NAME (check apache docs, I might have that misspelled) environment variable. That will tell you what user the FCGI is servicing. Then, put a little text file in each SITE dir that contains a list of the valid user. In your FCGI, look in the file and make sure the user is listed before servicing the request.

Or easier, but more hackish: make their login be the site name exactly... then you don't have to manage those text files per-site and you don't have to code that.

problems:

people need to give a valid user/pass to see the list of sites. and they can still see all the different sites -- an info leak -- without having a valid user/pass for each site.

But really, the whole layout of the entire thing isn't how I'd design it. (And I'm not into designing things for free, for fun.) So unless you have more ACF-related questions... I'll leave to your own devices.

Best of luck,
-c

0.o 02-15-2008 03:38 PM

Quote:

Originally Posted by cconstantine (Post 3058444)
oh. you can't do that...

apache will secure the single target -- that FCGI in the wisp directory. But that's it. It's just one single thing from apache point of view. The way to fix this is to implement he security in your FCGI; cookie-based login or something. But that (implementing http security) is non-trivial. Not brain surgery, but not a five-minute fix.

So, how here's a way to make it work with minimum hacking... how about this: (and this is ugly, but it would work)

Put security on the CFGI itself. Setup a pasword file with all the user/pass combos in it. Then in the FCGI, look at the USER_NAME (check apache docs, I might have that misspelled) environment variable. That will tell you what user the FCGI is servicing. Then, put a little text file in each SITE dir that contains a list of the valid user. In your FCGI, look in the file and make sure the user is listed before servicing the request.

Or easier, but more hackish: make their login be the site name exactly... then you don't have to manage those text files per-site and you don't have to code that.

problems:

people need to give a valid user/pass to see the list of sites. and they can still see all the different sites -- an info leak -- without having a valid user/pass for each site.

But really, the whole layout of the entire thing isn't how I'd design it. (And I'm not into designing things for free, for fun.) So unless you have more ACF-related questions... I'll leave to your own devices.

Best of luck,
-c

I never really did ask how you would design it, did I? And this worked for quite a long time before the upgrade.

Thanks for your help...

cconstantine 02-15-2008 03:41 PM

oh well...
 
Quote:

Originally Posted by 0.o (Post 3058448)
long time before the upgrade.

start with what was upgraded... (totally guessing here) maybe from an old apache that used to look down the path_info trail for ACF files... maybe there's a way to turn that back on...

Quote:

Originally Posted by 0.o (Post 3058448)
Thanks for your help...

you're welcome; sorry I didn't have a silver bullet

later,
-c


All times are GMT -5. The time now is 08:09 AM.