AOE ATA over Ethernet Redhat 5
I have tried this on CentOS and Red hat 5 systems.
Using aoetools 31 and vblade 20 the exported file system device is not being created, it just hangs.
1) created /etc/udev/rules.d/60-aoe.rules with:
SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
# aoe block devices
KERNEL=="etherd*", NAME="%k", GROUP="disk"
2) load the module
modprobe aoe
aoe: aoe_init: AoE v22i initialised.
3) devices are loaded:
/dev/etherd/
c-w--w---- 1 root disk 152, 3 Aug 25 10:16 discover
cr--r----- 1 root disk 152, 2 Aug 25 10:16 err
c-w--w---- 1 root disk 152, 4 Aug 25 10:16 interfaces
c-w--w---- 1 root disk 152, 5 Aug 25 10:16 revalidate
4) Exporting just hangs
vbladed 0 1 eth0 /dev/sdb1
pid 29274: e0.1, 39062961 sectors O_RDWR
I think it must be a udev problem. With out the aoe udev rules the device shows up in /var/log/messages, but I can not find e0.1 in /dev. Can any one tell me why it is failing to create /dev/etherd/e0.1?
Thank you for your time.
|