Freeradius
Hi all,
i'm a newbie in Linux and in Radius. I'm using fedora core 2.6.10.x and freeradius 1.01 (i think). I configured the freeradius server according document tldp.org/HOWTO/html_single/8021X-HOWTO/ I'm trying to setup an wireless station to use the fedora freeradius server. The authentication protocol i want to use is peap (protected enhanced authentication protocol). This with static username an password, later if i get this working i want to try and link it via ldap to NT :) Now when i start my freeradius server like radiusd -X i receive an error. I think my certificates aren't good, but when i click on them, it says "certificate valid" Here is my output of the debugging command. Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/server.pem" tls: certificate_file = "(null)" tls: CA_file = "/etc/raddb/certs/demoCA/ca.pem" tls: private_key_password = "SecretKeyPass77" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/dev/urandom" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" 3647:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:632:Expecting: CERTIFICATE 3647:error:0200100E:system library:fopen:Bad address:bss_file.c:259:fopen('','r') 3647:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:261: 3647:error:140AD002:SSL routines:SSL_CTX_use_certificate_file:system lib:ssl_rsa.c:513: rlm_eap_tls: Error reading certificate file rlm_eap: Failed to initialize type tls radiusd.conf[9]: eap: Module instantiation failed. I can also send my config files Is freeradius a good radiusserver or are there better / easier to configure radiusserver which are free? I already tried googling but the info i get is like chineese to me I also placed this thread in the software sections Thanks in advance Jorg |
All times are GMT -5. The time now is 02:21 PM. |