XFree86 Freezes when I test it...
Ok I just installed Gentoo and I was trying to install KDE I emrged and installed Xfree86 and I configured as per needed for my mouse. (LogitechMX500) and my keyboard (Using generic 104 PC US keyboard I actually have a Logitech Access Wireless keyboard) and I try startx to test it (as I do not want it to auto start until the kinks are worked out) and it keeps locking up after 30 seconds roughly. I can move my mouse around at first and click and roll the wheel just fine and then everything hard locks. When I try to run KDM it locks up almost instantly. The logs show nothing of use as far as I can tell. Any suggestions? All my searches really didn;t provide me with anything useful.
|
yes, what _do_ the logs show? whats the state of your /etc/X11/XF86Config-4? show us, we cant guess. did it work fine before the mouse and keyboard were added? more information please.
|
Well I am posting this from my windows install and I don't know how to make thre two see eachother. I didn't try without the mouse connected or the keyboard. Could it also be my video card? I have a 9800 Pro is there anythign special I need to do for that configuration?
|
got a usb flash device? use that, and copy the files on there then paste them here.
it could be the graphics drivers, i dont have a ATI card so couldnt tell you which to use, suggest a google search in that respect. |
Ok I don't have one personally but I can borrow one how would I go about mounting it or whatever?
|
mounted like so presuming you have usb mass storage set up in your kernel:
mount /dev/sda (or /dev/sda1 depending on how its partitioned) /mnt -tvfat copy the files you want to /mnt then type: umount /mnt |
Ok here is my XF86Config-4 file:
Code:
# File: XF86Config-4 |
And here is my log file....
Code:
|
[code]
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xea000000 - 0xea0fffff (0x100000) MX[B] [6] -1 0 0xea100000 - 0xea100fff (0x1000) MX[B] [7] -1 0 0xeb000000 - 0xeb000fff (0x1000) MX[B] [8] -1 0 0xeb004000 - 0xeb0040ff (0x100) MX[B] [9] -1 0 0xeb003000 - 0xeb003fff (0x1000) MX[B] [10] -1 0 0xeb002000 - 0xeb002fff (0x1000) MX[B] [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [12] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[B](B) [13] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [14] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[B](B) [15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [23] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B) [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): PCI bus 2 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "KernelModuleParm" "agplock=0" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "0x00000000" (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" (**) fglrx(0): Option "HSync2" "unspecified" (**) fglrx(0): Option "VRefresh2" "unspecified" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "IgnoreEDID" "off" (**) fglrx(0): Option "UseInternalAGPGART" "no" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "0" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "FSAAEnable" "no" (**) fglrx(0): Option "FSAADisableGamma" "no" (**) fglrx(0): Option "FSAACustomizeMSPos" "no" (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" (**) fglrx(0): Option "NoTV" "yes" (**) fglrx(0): Option "TVStandard" "NTSC-M" (**) fglrx(0): Option "TVHSizeAdj" "0" (**) fglrx(0): Option "TVVSizeAdj" "0" (**) fglrx(0): Option "TVHPosAdj" "0" (**) fglrx(0): Option "TVVPosAdj" "0" (**) fglrx(0): Option "TVHStartAdj" "0" (**) fglrx(0): Option "TVColorAdj" "0" (**) fglrx(0): Option "PseudoColorVisuals" "off" (**) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (**) fglrx(0): Option "mtrr" "off" (--) fglrx(0): Chipset: "ATI R350 NH (R9800)" (Chipset = 0x4e48) (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x1002) (--) fglrx(0): board vendor info: original ATI grafics adapter (--) fglrx(0): Linear framebuffer (phys) at 0xd8000000 (--) fglrx(0): MMIO registers at 0xe9000000 (--) fglrx(0): ChipExtRevID = 0x00 (--) fglrx(0): ChipIntRevID = 0x01 (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (II) fglrx(0): board/chipset is supported by this driver (original ATI board) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (**) fglrx(0): MonitorLayout Option: Monitor1--Type AUTO, Monitor2--Type AUTO (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): EDID data from the display on Secondary head --------------------------- (II) fglrx(0): Manufacturer: CMO Model: 7801 Serial#: 0 (II) fglrx(0): Year: 2003 Week: 22 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) fglrx(0): Sync: Separate (II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): GTF timings supported (II) fglrx(0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 (II) fglrx(0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz (II) fglrx(0): Monitor name: CMC 17" AD (II) fglrx(0): Serial No: 0 (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): Overlay disabled (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=33800 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 6 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) fglrx(0): *Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz (II) fglrx(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): *Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) fglrx(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (--) fglrx(0): Display dimensions: (340, 270) mm (--) fglrx(0): DPI set to (95, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (**) fglrx(0): FSAA Gamma enabled (**) fglrx(0): FSAA Multisample Position is fix (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0.1, module version = 3.9.0 ABI class: XFree86 Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): cpuFlags: 0x4000000f (**) fglrx(0): cpuSpeedMHz: 0x0000089d (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: no (**) fglrx(0): KernelModuleParm: "agplock=0" (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024] (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe9000000 - 0xe900ffff (0x10000) MX[B] [1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xea000000 - 0xea0fffff (0x100000) MX[B] [8] -1 0 0xea100000 - 0xea100fff (0x1000) MX[B] [9] -1 0 0xeb000000 - 0xeb000fff (0x1000) MX[B] [10] -1 0 0xeb004000 - 0xeb0040ff (0x100) MX[B] [11] -1 0 0xeb003000 - 0xeb003fff (0x1000) MX[B] [12] -1 0 0xeb002000 - 0xeb002fff (0x1000) MX[B] [13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [14] -1 0 0xe9000000 - 0xe900ffff (0x10000) MX[B](B) [15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [16] -1 0 0xe9010000 - 0xe901ffff (0x10000) MX[B](B) [17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [25] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [26] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B] [27] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B) [28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) fglrx(0): UMM area: 0xd8700000 (size=0x07900000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (II) fglrx(0): detected XFree86 version: 4.3.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 4, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] loaded kernel module for "fglrx" driver (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xc8a87000 (II) fglrx(0): [drm] mapped SAREA 0xc8a87000 to 0x2aabf000 (II) fglrx(0): [drm] framebuffer handle = 0xd8000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 3.9.0 (II) fglrx(0): Date: May 11 2004 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.26-gentoo-r6 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xe9000000 (II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f004312) (II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode) (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672 (II) fglrx(0): [drm] texture shared area handle = 0xd0b9f000 (II) fglrx(0): shared FSAAScale=1 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x00700000 (II) fglrx(0): FBMM initialized for area (0,0)-(1280,1433) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 1024) (II) fglrx(0): Largest offscreen area available: 1280 x 401 (**) Option "dpms" (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 30 128x128 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): X context handle = 0x00000001 (II) fglrx(0): [DRI] installation complete (II) fglrx(0): Direct rendering enabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "ExplorerPS/2" (**) Mouse1: Protocol: "ExplorerPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "7" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Mouse1: Buttons: 7 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded |
Ok Progress....mouse doesn;t seem to be the issue when i start KDM the mosue works but the keyboard doesn't. I have a Logitech Wireless Access Keyboard (Mouse is tethered however) Well sorta KDM works. Keyboard doesn't work I can move the mouse but nne of the buttons on the windows work either.....its really weird now....I assume its the keyboard.
|
Ok well the ZMappingZxis is not fixed to ZAxisMapping but it still locks up....
|
Not so shockingly switching to Xorg didn't help at all.
|
All times are GMT -5. The time now is 12:13 PM. |