What went wrong??Beagle board -xm not booting with the kernel 3.0.8
I have the following output on the console:
Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27) Beagle xM Rev A Reading boot sector Loading u-boot.bin from mmc U-Boot 2010.03-dirty (Aug 20 2010 - 20:50:46) OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MB NAND: 0 MiB *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial Probing for expansion boards, if none are connected you'll see a harmless I2C error. No EEPROM on expansion board Beagle xM Rev A Die ID #0ffa00011ff00000015739eb0702700f Hit any key to stop autoboot: 0 mmc1 is available The user button is currently NOT pressed. reading boot.scr 415 bytes read Running bootscript from mmc ... ## Executing script at 80200000 reading uImage 3853220 bytes read ***** Kernel: /dev/mmcblk0p1/uImage ***** ***** RootFS: /dev/mmcblk0p2 ***** ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-3.0.8-00511-g2a468a3-dirty Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3853156 Bytes = 3.7 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. <5>Linux version 3.0.8-00511-g2a468a3-dirty (ee205679@pcb-ee205679) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #3 SMP Tue Nov 29 14:08:44 IST 2011 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: OMAP3 Beagle Board Memory policy: ECC disabled, Data cache writeback <6>OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk ) <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 <7>On node 0 totalpages: 63744 <7>free_area_init_node: node 0, pgdat c0757880, node_mem_map c0cb9000 <7> Normal zone: 576 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 63168 pages, LIFO batch:15 <6>Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz <6>Reprogramming SDRC clock to 332000000 Hz <6>PERCPU: Embedded 8 pages/cpu @c0efe000 s9248 r8192 d15328 u32768 <7>pcpu-alloc: s9248 r8192 d15328 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63168 <5>Kernel command line: console=ttyS2,115200n8 androidboot.console=ttyS2 mem=256M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootdelay=1 init=/init ip=off mpurate=800 omay <6>PID hash table entries: 1024 (order: 0, 4096 bytes) <6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) <6>Memory: 249MB = 249MB total <5>Memory: 239392k/239392k available, 22752k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0062000 ( 360 kB) .text : 0xc0062000 - 0xc06c8fa8 (6556 kB) .data : 0xc06ca000 - 0xc0762098 ( 609 kB) .bss : 0xc07620bc - 0xc0cb8068 (5464 kB) <6>Hierarchical RCU implementation. <6>NR_IRQS:410 <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts <6>Total of 96 interrupts on 1 active controller <4>omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. <6>OMAP clockevent source: GPTIMER12 at 32768 Hz <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>Console: colour dummy device 80x30 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3695 kB per task-struct memory footprint: 1152 bytes <6>Calibrating delay loop... |
All times are GMT -5. The time now is 07:51 AM. |