What are settings for Zappa TV/Radio card cant find them
 

I have been googling a bit and from what I have read it appears that the reason that my xawtv is only showing fuzz is that my tuner isnt set up right. The only problem is that I couldnt exactly what I need to set and what the settings are. I belive that I need to change the card= in my etc/modules.conf file.

Anyone know what I should set it to? I have a Zaapa Tv/Radio tuner card the only numbers I could find on the card were ZATV878RF and it has conexant written on one of the chips, NO FCC :( I couldnt find any info on this card googling :(



[adam@localhost adam]$ dmesg
Linux version 2.4.20-9 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2
20030313 (Red Hat Linux 3.2.2-10)) #1 Wed Apr 2 13:42:50 EST 2003
BIOS-provided physical RAM map:
*******************Bottom part*********************************
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:02.7
PCI: Sharing IRQ 11 with 00:0a.1
bttv0: Bt878 (rev 17) at 00:0a.0, irq: 11, latency: 64, mmio: 0xdfcfe000
bttv0: using: BT878(Hauppauge (bt878)) [card=10,insmod option]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv: readee error
bttv0: Hauppauge eeprom: invalid
bttv0: Hauppauge eeprom: model=0, tuner= (4), radio=no
bttv0: using tuner=4
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
0,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=NoTuner,ok]
i2c-core.o: client [NoTuner] registered to adapter [bt848 #0](pos. 0).
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 ... ok
tuner: TV freq (0.-6) out of range (44-958)
tuner: TV freq (0.-6) out of range (44-958)
tuner: TV freq (0.-6) out of range (44-958)
tuner: TV freq (0.00) out of range (44-958)
[adam@localhost adam]$

Where can I go from here? I want tv again, but without windows! It all works find in windows.
Adam

i have a tv card zaapa and the config is tuner=5 card=54

Hey man that was actaully a couple of years ago! Thanks anyway though :)