USB not detected?
Hello,
My USB stick is not being detected. I don't know if it is partitioned or not, and do not know what kind of file system it has. The USB is a Cruzer Edge 16GB. With it connected, the output for various commands are as follows: lsblk Code:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT Code:
Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader Code:
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors Thanks in advance! Bill |
Start from beginning, is USB storage kernel module loaded?
|
Thanks for the reply Emerson,
lsmod Code:
Module Size Used by From the lsusb command, the USB is detected, however, in Xfce File Manager, it does not appear. Nor does it appear under the lsblk command. Thanks for the help! |
The kernel module to access USB block devices is called usb_storage, I do not see it loaded. I'd try and load it by hand and check if fdisk shows your drive afterwards.
|
Thanks for the reply Emerson,
How do I do this from the terminal? I've been through Arch Linux boot camp (i.e. the installation), however I don't know too many other unrelated commands. Cheers! |
modprobe usb_storage
Code:
modprobe: FATAL: Module usb_storage not found in directory /lib/modules/4.15.3-2-ARCH |
Have you looked at the output of the dmesg command to see if the drive is being recognized?
Assuming you are running a stock kernel SCSI-Support, SCSI-Disk-Support and usb_storage are compiled in so it isn't a loadable module. |
Thanks, michaelk. The only non-Gentoo Linux I have here is Mint and it has usb_storage as module.
|
I don't have that module in CentOS.
Firstly, have you tried using more than one USB port? Can you try the stick on another computer? The fact that it's not being mounted doesn't necessarily mean it's not being found. Plug it in, start gparted, and see if that program can find /dev/sdb. |
It does appear something is amiss. Try ls /dev/sd*. As also mentioned, try different usb ports. Try different computers. Seriously, if it won't show up in /dev, that's a bad sign. If you're using a laptop, make sure it's plugged into the AC outlet. Most laptops supply less power to the USB ports when running on battery power. The Sandisk Cruz might require more power than that.
|
All times are GMT -5. The time now is 11:31 PM. |